|
|
|
May 3rd, 2009, 14:14
|
#31 |
|
have you tried the motor height? like i said earlier...
__________________
 member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
|
|
May 3rd, 2009, 20:09
|
#32 |
|
Okay. This will probably be my last post on this thread:
I found out what was the problem with the gun, it was the motor height.  but Is there an easier way to put the two halves of the mechbox back together? LOL. That is definetly to me the hardest part of the whole process.
|
|
|
|
|
May 3rd, 2009, 20:50
|
#33 |
|
|
Okay. This will probably be my last post on this thread:
I found out what was the problem with the gun, it was the motor height. but Is there an easier way to put the two halves of the mechbox back together? LOL. That is definetly to me the hardest part of the whole process.
|
|
|
|
|
May 3rd, 2009, 21:16
|
#34 |
|
Reassembling a mechbox can be quite frustrating, particular on mechboxes with low tolerances like most chinese clones. Nothing wants to stay in place. Just keep trying till you get it.
__________________
|
|
|
|
|
May 4th, 2009, 00:03
|
#35 |
|
I find a good close fisted slam does the trick
|
|
|
|
|
May 4th, 2009, 06:18
|
#36 |
|
|
lol,
thanks. |
|
|
|
|
May 4th, 2009, 20:41
|
#37 |
|
|
Sorry if I'm annoying someone with this non-stop thread; I hoped never to come back to this thread myself
I've reassembled the mechbox, but by all the gears behind the trigger, it doesn't fit "snuggly" and is seems almost more of a tight sqeeze then what it should be but: what do I know. I've made sure to replace all the parts as were when I first opened the mechbox, so right now im just wondering if its normal for it to be this tight?\ VERY much appreciated EDIT: Never mind; i figured it all out. Thanks everyone for your help.
Last edited by Kingly; May 4th, 2009 at 20:43.. Reason: Update on my situation |
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
