Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Calculating battery power

:

Newbie Tank

Reply
 
Thread Tools
Old March 6th, 2010, 12:45   #1
Griffen
a.k.a {BDS} Veritas
 
Griffen's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, West End
Send a message via MSN to Griffen
Calculating battery power

So i know a bit about the voltage and the mAh but i may have my info a bit wrong. Volts are the "strength" of the battery and mHa are the amount of energy the battery holds. But in testing the battery i have i found some crazy differences.



8.4v-1100
8.4v-1400

Both these are almost the same.

8.4v-4000 Question 1: Will more mHa effect the life of the internals?

In theory should this battery just last longer? Its so much stronger, and a huge ROF increase. Question 2: Why is more mHa making this change?

9.6v-1100

I get a better ROF with this guy.
__________________



Elite Force - Front Line Resolution - What's In Your Mag?

Last edited by Griffen; March 6th, 2010 at 12:50..
Griffen is offline   Reply With Quote
Old March 6th, 2010, 13:43   #2
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
I'm a bit rusty on my physics but essentially Voltage is the ability to "push" current. Higher voltage means that you get more "umph". So as it stands higher voltage translates into a higher ROF.

Amperes on the other hand (in this case milliampere*hours) is the amount of charge or "juice" you have. The unit derives from some weird measure that I forget, it has something to do with "Coulombs" though (a unit of electric charge). Like I said it's been a while since I last took physics.

So take these examples:

8.4V-1400 mAh battery: you shoot 1200 BB's (assuming that you get 1BB per mAh) that means you only have about 200 mAh (worth of "juice") in the battery at the end of the day. When you have no more (or very little) what happens? Lets say you do one last round and shoot your last 200 BB's. You have no "juice", there isn't any charge or "juice" in the battery pack that can be used to propel a BB.

Now take that same battery but instead add another cell to it turning it into a 9.6V-1400 mAh battery. Notice how it's still 1400 mAh? You didn't increase the amount of juice you have in your battery pack BUT you increased the voltage by adding another cell. Why? Well, the battery is setup in "series". Adding cells adds to voltage, a disadvantage being if one cell fails (not very likely) the pack is unusable until you replace or repair the pack or cell, just like older christmas lights where you had to find which bulb burnt out or it wouldn't work. These days christmas lights are setup in parallel. Anyways, you didn't increase the capacity of the pack to hold a charge rather you increased the "umph", the "push" of electricity to the motor/internals. As a result you notice the trigger response is "faster" as well you get a ROF increase because there is now more juice to pull the spring back faster.
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE

Last edited by L473ncy; March 6th, 2010 at 13:45..
L473ncy is offline   Reply With Quote
Old March 6th, 2010, 13:47   #3
Eeyore
Suburban Gun Runner
 
Join Date: Jan 2009
Location: St Lambert, Quebec
Since we are already on the subject of batteries. Does the same thing apply to lipo's? I only ask because I bougbht a charger thats capable of charging lipo's too, and I'm considering making the jump.
__________________
Quote:
Originally Posted by Pinard View Post
eeyore, the more I look at your avatar, the more I find it looks like a vagina...
http://i.imgur.com/wBfBB.gif
Eeyore is offline   Reply With Quote
Old March 6th, 2010, 14:09   #4
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
Quote:
Originally Posted by notom View Post
Since we are already on the subject of batteries. Does the same thing apply to lipo's? I only ask because I bougbht a charger thats capable of charging lipo's too, and I'm considering making the jump.
AFAIK from what I learnt in physics a battery is a battery is a battery. They are all pretty much "generic". We don't talk about specific formula when talking about batteries unless we need to calculate the voltage or something. The only difference being that different chemistries produce differing amounts of "nominal voltage" (a LiPo cell is like 3.7 or 3.8, NiCd 1.2, NiMH also 1.2).

There is also a new type of electrochem cell I've heard being developed called "LiFe" batteries made of Lithium Ferrite with some other additive (to keep it stable or something) I forget exactly what's so good about it but apparently RC hobbyists are treating it like it's some crazy new development that's going to change the hobby as they know it. It's supposed to have better power density than LiPo's or something.
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old March 6th, 2010, 14:17   #5
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Think of it as a river
voltage is how fast the river is moving
amperage is how big the river is
and resistance is the rocks slowing down the water

NiMH cells don't actually provide all the amperage needed to operate airsoft gun motors, so we up the voltage to get higher ROF. more voltage means the same amount of amperage delivered faster.
It's also why an 8.4v 4200mah battery will fire significantly faster than an 8.4v 1600mah battery. The larger surface area in the cell offers more amperage, and therefore a higher ROF. Same voltage, more amperage.

A LiPo offers all the amperage your motor needs, therefore less voltage is required. A 7.4v 20C 1600mah LiPo will have the same ROF as a 9.6v 1500mah NiMH battery.
Now since the mini LiPo already offers all the amperage you need, it will have the same ROF as a 7.4v 20C 4900mah battery.

And I think the batteries your talking about are lithium iron phosphate, supposed to have higher energy density and be 'safer' lol
ThunderCactus is offline   Reply With Quote
Old March 6th, 2010, 14:45   #6
Griffen
a.k.a {BDS} Veritas
 
Griffen's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, West End
Send a message via MSN to Griffen
Got it thanks guys!!!
__________________



Elite Force - Front Line Resolution - What's In Your Mag?
Griffen is offline   Reply With Quote
Old March 6th, 2010, 16:48   #7
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
It also depends on the quality of the cells, not just voltage and mAh.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old March 6th, 2010, 18:59   #8
Doombringer
 
Doombringer's Avatar
 
Join Date: Feb 2005
Location: Plateau, Montreal
And also, the total power is equal to the product of the Voltage and Amperage

P = UI

So you either have a higher voltage or a higher amperage to get the same power. This is why they usualy go with higher voltage on Ni-Mh cells, because they are not made to provide a high Amperage, as opposed to Li-Po cells.

The problem with higher amperage is that Heat dissipation is only affected by either Resistance or Amperage, not voltage. This is why the hydro company transports all the electricity at very high voltages, to minimize the loss in power (heat).

P = R*I^2

The mAh means milli-ampere by hour. If you have 1000 mAh, it means that the battery can provide 1 ampere (1000 mA) for 1 hour before being drained out. So a 4000 mAh is not a battery that is more powerful, but it is a battery that will last longer that the other one. For exemple either 4 amperes for 1 hour, or 1 ampere for 4 hours. I think you got it, it's real simple.

Last edited by Doombringer; March 6th, 2010 at 19:02..
Doombringer is offline   Reply With Quote
Old March 6th, 2010, 20:59   #9
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
I'm talking about different cell sizes, a 4000mah battery is more powerful because the cells are physically larger.
A 1400mah sub-c cell and a 1000mah sub-c cell have the same amperage, but a 4000mah C cell provides more amperage.
If you want hard proof, hook up an 8.4v mini to your gun, and then hook up an 8.4v 4000mah battery. There's a very clear audible difference in ROF, and they have the exact same output voltage, therefore the large battery provides more amperage.
ThunderCactus is offline   Reply With Quote
Old March 6th, 2010, 23:08   #10
Griffen
a.k.a {BDS} Veritas
 
Griffen's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, West End
Send a message via MSN to Griffen
Yeah thats what i was talking about with the high mah battery. It will drain the same mag an easy 2-3 secs faster. But what i was really wondering was using a high mah 9.6v would be more harmful for my internals.
__________________



Elite Force - Front Line Resolution - What's In Your Mag?

Last edited by Griffen; March 7th, 2010 at 01:32..
Griffen is offline   Reply With Quote
Old March 6th, 2010, 23:12   #11
Doombringer
 
Doombringer's Avatar
 
Join Date: Feb 2005
Location: Plateau, Montreal
I explained what mAh is for. It's not because of the mAh rating that one 9.6V is "stronger" than the other one, it's beacause of it's discharge rate.

It's like if you had a car, and said that it was more powerful because you had a bigger gas tank.
Doombringer is offline   Reply With Quote
Old March 7th, 2010, 01:34   #12
Griffen
a.k.a {BDS} Veritas
 
Griffen's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, West End
Send a message via MSN to Griffen
Quote:
Originally Posted by ThunderCactus View Post
If you want hard proof, hook up an 8.4v mini to your gun, and then hook up an 8.4v 4000mah battery. There's a very clear audible difference in ROF, and they have the exact same output voltage, therefore the large battery provides more amperage.
Yeah i was referring to this statement. My original question had more to do with ROF and wear on my gun. TC hit the nail on the head. Thanks!!!
__________________



Elite Force - Front Line Resolution - What's In Your Mag?
Griffen is offline   Reply With Quote
Old March 7th, 2010, 17:20   #13
Love
formerly Lythinca
 
Love's Avatar
 
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
Send a message via AIM to Love Send a message via MSN to Love
ThunderCactus: As much as I love your name, I've never heard of mAh giving a faster ROF.

I think of it this way. Its a pool of water.

Volatage is the size of the pool
mAh is how much water is in the pool

Voltage increase gives ROF increase. mAh increase gives longer play time.
__________________
Currently modding AK.

Loadout 1:
Yugoslavian M76/Maadi RML Alternative (Kraken)
CYMA Glock 18C

Loadout 2:
TM MP5 w/ flashlight
CYMA Glock 18C

Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig.
Love is offline   Reply With Quote
Old March 7th, 2010, 17:28   #14
ujiro
 
ujiro's Avatar
 
Join Date: Aug 2006
Location: Burlington, ON
Send a message via MSN to ujiro
Quote:
Originally Posted by Love View Post
ThunderCactus: As much as I love your name, I've never heard of mAh giving a faster ROF.

I think of it this way. Its a pool of water.

Volatage is the size of the pool
mAh is how much water is in the pool

Voltage increase gives ROF increase. mAh increase gives longer play time.
mAh can give RoF increases: I agree with thundercactus. I find that generally the batteries with big mAh can dump the current better. This is probably due to what thundercactus said: physical size and/or quality of the battery. I had a 9.6V ~2000mAh and 9.6V ~3900mAh battery, both sub-C cells. The 3900mAh had an edge on the RoF (albeit by a pretty small margin, but certainly significant I would say)
__________________
I love freedom and consequently America
ujiro is offline   Reply With Quote
Old March 7th, 2010, 17:31   #15
Love
formerly Lythinca
 
Love's Avatar
 
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
Send a message via AIM to Love Send a message via MSN to Love
Understandable, I wasnt catching onto what cactus was referring too.
__________________
Currently modding AK.

Loadout 1:
Yugoslavian M76/Maadi RML Alternative (Kraken)
CYMA Glock 18C

Loadout 2:
TM MP5 w/ flashlight
CYMA Glock 18C

Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig.
Love is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 20:51.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.