|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 18th, 2009, 00:16 | #1 |
Banned
|
Looking for gloves
Im trying to find a pair of knock off Oakley SI Assault Gloves or even just gloves in general with the knuckle protectors... Better described if seen Link: http://www.polimil.co.uk/acatalog/94025889.jpg Im hoping for them to be in country and below $40
|
October 18th, 2009, 00:20 | #2 |
Can't fix my own guns. Willing to fix yours.
|
go to canadian tire and get some of the mechanix gloves, they have a padded variety for like 30 bucks
|
October 18th, 2009, 00:25 | #3 |
vision impaired
|
He's looking for the ones with the hardened knuckles, Not Mechanix. Thought Mechanix do kick some serious ass for the price.
|
October 18th, 2009, 00:28 | #4 |
Can't fix my own guns. Willing to fix yours.
|
mechanix gloves have a variety with rubber padded knuckles
|
October 18th, 2009, 00:30 | #5 |
You could also try Mark's... Lots of varieties of Dakota brand work gloves, black, or black and olive or black and sand...
__________________
Delenda Est Carthago |
|
October 18th, 2009, 00:32 | #6 |
a.k.a. wingmantank
|
dude if you wanna get those gloves under $40, your only choice is go get a pair of replica, http://www.ebairsoft.com/quality-tac...ki-p-1869.html
__________________
|
October 18th, 2009, 01:04 | #7 | |
Official ASC Bladesmith
|
Quote:
Side note, check out CP Gear, they recently added gloves to their line up, and recall seeing hard knuckle ones there too. |
|
October 18th, 2009, 01:13 | #8 |
Guest
|
CP Gear doesn't have hard knuckle gloves. They got gloves with foam above the knuckles like the hatch operator gloves though.
|
October 18th, 2009, 01:28 | #9 | |
Official ASC Bladesmith
|
Quote:
http://www.cpgear.com/StoreBox/gloves/6181.htm Here are the foam knuckled ones you mentioned: http://www.cpgear.com/StoreBox/gloves/6180.htm I don't like the colour they show, looks more blue than OD, likely the lighting or something. |
|
October 18th, 2009, 02:03 | #10 |
Prancercise Guru
|
I have these from Hatch.
http://www.hatch-corp.com/detail.aspx?pid=SOG-HK 300/350/400 More than you planned to spend but really comfortable. The do have hard knuckles and I find that with those very often I get a pressure point that after a few hours feels like someone shoving a nail into my hand. With the Hatch ones though the term `fits like a glove` applies.
__________________
Airsoft, where nothing is hurt but feelings. |
October 18th, 2009, 05:00 | #11 |
I just picked up a pair of toughgrips from home depot, Planning on using them mostly for work but they will double nicely as airsoft gloves. They have knuckle protectors and *rough* stuff on the finger tips and on pressure points where you would pick something up.
Now the cool thing about these gloves is they have a breathable waterproof liner. Cool way to describe this is if you fill the liner with hot water you can see steam running out but no water escapes. Got them for 25 bucks. They are a bit warmer so more of a fall winter glove. If you want something with hard knuckles that are comfortable hit up a bike shop. Should be able to get something in black with lots of protection yet flexible enough to ride/shoot with. |
|
|
Bookmarks |
|
|