Best choice for Lipo

PrIeSt · August 2nd, 2009, 20:41

I am looking to upgrade to a lipo AND a trigger master

I wish to have a floating from rail ssystem so nothing I need to put up there. I have a m15a4 with a sliding ctr magpul stock. No room in the stock for the battery. my only real choice is one for in the (slide tube??) I have seen some. Prefer around 8.4v or so? maybe a 7.2? still learning more on the sizes.

Where's my best choice to aquire one of these? and best place to go for price.

Shawn

Midgetkid · August 2nd, 2009, 20:47

Well, for the lipo, iv heard the RA-Tech are great. I actually just got mine but havent been able to feild it. I have the 7.4.v which will give you the same ROF as about a large 8.4v

PrIeSt · August 2nd, 2009, 20:58

Right those were the numbers I was thinking of. 7.4v I need to find one for the stock tube now. see if I can fit it in with a mosfet. then rewire

PrIeSt · August 2nd, 2009, 21:33

i just measured the inner dimensions of my stock tube

I get 2.5 wide but only 10cm long. the stock tube batts i see online advertise as 12 or 14 long?

do i need a custom longer stock tube?

H1TMAN · August 2nd, 2009, 21:53

Im, planning to purchase this battery from RA-Tech when, I upgrade to lipo.

http://www.airsoftpost.com/ratech-ty...m-p-31128.html

Should fit nicely in a buffer tube.

PrIeSt · August 3rd, 2009, 00:53

buffer tube. hmm i guess that's the proper name heh

that one is also 14cm

i stuck a ruler inside my tube and it only allows for 10cm

If I put a longer one on. my sliding butt won't go in as far
If I had a g+p body I guess. since they are not supported by that little nub thing.

not sure how you get them into these rifles.

ginnz · August 3rd, 2009, 12:38

if you guys dont mind waiting a week for your lipo's, check out Hobbycity.com, they have the best prices on lipo's and chargers on the planet!

ShelledPants · August 3rd, 2009, 12:39

Quote:

Originally Posted by ginnz

if you guys dont mind waiting a week for your lipo's, check out Hobbycity.com, they have the best prices on lipo's and chargers on the planet!

+1000

I've been buying from there for a year now. Great store. Check out Zippy Lipos in specific.

The Saint · August 3rd, 2009, 12:41

Last time I looked through Hobbycity, I couldn't find any lipos appropriate for buffer tubes (stick). So I checked Cheapbatterypacks and found one or two that would probably fit. Between those two online stores, one really can't go wrong.

KND · August 3rd, 2009, 13:09

I have something similar to this but 11.1 V, it fit perfectly in the buffer tube.

http://shop.ehobbyasia.com/hot-power...m-battery.html

ThunderCactus · August 3rd, 2009, 19:46

Quote:

Originally Posted by takagari

If I had a g+p body I guess. since they are not supported by that little nub thing.

What little nub thing are you talking about?

PrIeSt · August 3rd, 2009, 23:54

Quote:

Originally Posted by ThunderCactus

What little nub thing are you talking about?

that would not be the body i have
I have a classic army sportline. The rear buffer tube slide son and is screwed from the inside.
Again another reason to change my body

I slid a pen inside my buffer tube and measured the depth. I got 10CM inside depth

Again all these batts are 12-14.. not sure how to get that in there.

Shawn

ThunderCactus · August 4th, 2009, 01:55

I'm not trying to be derogatory in any way, you just have me really confused here.
From what you've said I'm under the impression you have a standard stock tube and receiver. You say you have a classic army sportline M4?
Could you please point out on this diagram of a CA sportline M4 where your receiver differs from the picture of the G&P receiver I posted?
http://www.classicarmy.com/new/uploa...12104754_7.jpg

But back on topic, there are other places you can put a LiPo, like ANPEQs

http://www.airsoftpost.com/king-arms...y-p-30627.html

Styrak · August 4th, 2009, 02:06

Quote:

Originally Posted by takagari

I have a classic army sportline. The rear buffer tube slide son and is screwed from the inside.
Again another reason to change my body

That's how all "normal" armalite receivers attach their stock tubes, including G&P. You mean screw inside the stock tube right?

PrIeSt · August 4th, 2009, 23:27

Quote:

Originally Posted by Styrak

That's how all "normal" armalite receivers attach their stock tubes, including G&P. You mean screw inside the stock tube right?

Yes

Thunder, The lower recver in that pic has a extension sticking out
near s2007028
which shortens the inside space of my buffer tube greatly. making none of the current buffer tubes batteries fit.

Shawn

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 2nd, 2009, 20:41	#1
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	Best choice for Lipo I am looking to upgrade to a lipo AND a trigger master I wish to have a floating from rail ssystem so nothing I need to put up there. I have a m15a4 with a sliding ctr magpul stock. No room in the stock for the battery. my only real choice is one for in the (slide tube??) I have seen some. Prefer around 8.4v or so? maybe a 7.2? still learning more on the sizes. Where's my best choice to aquire one of these? and best place to go for price. Shawn __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

August 2nd, 2009, 20:58	#3
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	Right those were the numbers I was thinking of. 7.4v I need to find one for the stock tube now. see if I can fit it in with a mosfet. then rewire __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

August 2nd, 2009, 21:33	#4
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	i just measured the inner dimensions of my stock tube I get 2.5 wide but only 10cm long. the stock tube batts i see online advertise as 12 or 14 long? do i need a custom longer stock tube? __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

August 2nd, 2009, 20:47	#2
Midgetkid Trader rating Join Date: Apr 2008 Location: St.Catharines	Well, for the lipo, iv heard the RA-Tech are great. I actually just got mine but havent been able to feild it. I have the 7.4.v which will give you the same ROF as about a large 8.4v

August 2nd, 2009, 21:53	#5
H1TMAN formerly GRoy Trader rating Join Date: Dec 2008 Location: Angus, ON	Im, planning to purchase this battery from RA-Tech when, I upgrade to lipo. http://www.airsoftpost.com/ratech-ty...m-p-31128.html Should fit nicely in a buffer tube.

August 3rd, 2009, 00:53	#6
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	buffer tube. hmm i guess that's the proper name heh that one is also 14cm i stuck a ruler inside my tube and it only allows for 10cm If I put a longer one on. my sliding butt won't go in as far If I had a g+p body I guess. since they are not supported by that little nub thing. not sure how you get them into these rifles. __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B] Last edited by PrIeSt; August 3rd, 2009 at 00:57..

August 3rd, 2009, 12:38	#7
ginnz Trader rating Join Date: Apr 2009 Location: Small Town! Manitoba	if you guys dont mind waiting a week for your lipo's, check out Hobbycity.com, they have the best prices on lipo's and chargers on the planet!

August 3rd, 2009, 12:41	#9
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Last time I looked through Hobbycity, I couldn't find any lipos appropriate for buffer tubes (stick). So I checked Cheapbatterypacks and found one or two that would probably fit. Between those two online stores, one really can't go wrong. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

August 3rd, 2009, 13:09	#10
KND * AV revoked * Trader rating Join Date: Apr 2008 Location: Downtown Montreal	I have something similar to this but 11.1 V, it fit perfectly in the buffer tube. http://shop.ehobbyasia.com/hot-power...m-battery.html

August 4th, 2009, 01:55	#13
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	I'm not trying to be derogatory in any way, you just have me really confused here. From what you've said I'm under the impression you have a standard stock tube and receiver. You say you have a classic army sportline M4? Could you please point out on this diagram of a CA sportline M4 where your receiver differs from the picture of the G&P receiver I posted? http://www.classicarmy.com/new/uploa...12104754_7.jpg But back on topic, there are other places you can put a LiPo, like ANPEQs http://www.airsoftpost.com/king-arms...y-p-30627.html Last edited by ThunderCactus; August 4th, 2009 at 01:58..

Best choice for Lipo

Upgrades & Modifications