Vsr 10 Piston Problem

DarkkillA · June 15th, 2009, 15:31

Hey i bought a Vsr 10 and it works good but i also have a new Piston but the problem is that the piston does not fit in, i can screw it in down to the end of the cylinder head threads but then it will not go any further.

Where as the stock piston just slides in and out with out any screwing or any problem. (i know there is no o-ring on the stock one it is on the new one since it is tighter than the one that the new one came with)

Is there a way to decrease the size of the white ring's evenly to make it slide in or go in properly to work how it is made to?

Any help would be great and much appreciated
thanks in advance to anyone that helps
Dan

ThunderCactus · June 15th, 2009, 16:19

is it a bore up piston?
and are you using a laylax cylinder with a laylax piston? Or are you mixing and matching parts?

DarkkillA · June 15th, 2009, 16:36

Quote:

Originally Posted by ThunderCactus

is it a bore up piston?
and are you using a laylax cylinder with a laylax piston? Or are you mixing and matching parts?

I am not sure what a bore up piston is but this is what i got.
http://shop.ehobbyasia.com/upgrade-p...10-g-spec.html

I am mixing and matching parts everything is stock other than the hop up rubber and this piston, i guess it could be as well that it is the clone. (tsd)

damage · June 15th, 2009, 16:41

The piston ring(2 white POM ring) is large. It will fit with a little modification

DarkkillA · June 15th, 2009, 16:44

Alright I now can put it in and it acts the same as the original except that it makes the spring scratch against the sides of the cylinder where the original does not

vsrsnipersquad · July 20th, 2010, 03:54

hey dude, i have the same problem and purchased the orange piston from airsoft gi. Everything i have is stock but this orange piston. I dont know if it will work but after having conversations with proffessionals they said this would fix a slam firing problem. Im pretty sure that the red one is for a fully updated upgrade system. The orange one is 35 bucks from the us if your interested. ill talk again when i get it and see if it works.

CJay · July 20th, 2010, 04:27

I've worked on many vsr10 snipers and I can tell ya that yes it will work if u very very carefully grind down the white polyethylene buffers to the same diameter as the metal however id reccomend going with the laylax cylinder upgrade instead. Worth the money and also not having the headache of wrecking a very expensive piston

Kos-Mos · July 21st, 2010, 01:34

Quote:

Originally Posted by vsrsnipersquad

hey dude, i have the same problem and purchased the orange piston from airsoft gi. Everything i have is stock but this orange piston. I dont know if it will work but after having conversations with proffessionals they said this would fix a slam firing problem. Im pretty sure that the red one is for a fully updated upgrade system. The orange one is 35 bucks from the us if your interested. ill talk again when i get it and see if it works.

It is the other way around... red piston is for stock trigger system where the orange is for upgraded V-trigger or Zero trigger (both about 200$ each for just the trigger)

The orange one will "work" with the stock sears but expect to change them twice a year at least.

vsrsnipersquad · July 28th, 2010, 17:21

well this orange one with all the stock internals is crazy,

if you pull the bolt back slowly, then it doesnt work at all, it just jumps over like the previous time. If you really slam the bolt back, then it catches but the second you try to put it forward it slams. I am pretty sure that this means the piston sear is worn, but if this orange one isnt designed for the stock trigger then i could be wrong. Im not that sure but i think im gonna send it back to buy airsoft to get it fixed by there technician.

Amos · July 28th, 2010, 17:24

... All these new threads about people trying to build cheap VSR-10's are starting to give me a headache...

m102404 · July 28th, 2010, 17:40

...kind of hurts your soul a bit doesn't it...

Amos · July 28th, 2010, 17:42

My VSR's sitting disassembled in her case right now rocking back and forth crying to herself while she waits for the cylinder head to go out and come back from the machinist..

Kos-Mos · July 28th, 2010, 17:45

What are you having done to it? Out of curiosity... I am looking for one that is flat to install a sorbo kit... but the PDI is cone shaped and the Laylax "pro" is impossible to find...

CJay · July 31st, 2010, 01:42

hehehe i have 4 laylax pro's sitting on me desk right now :P

right enough they're all going into custom guns I'm building for ppl but i'll see if I can locate another for ya if ur stuck kos-mos ;D

Amos · July 31st, 2010, 01:53

Quote:

Originally Posted by Kos-Mos

What are you having done to it? Out of curiosity... I am looking for one that is flat to install a sorbo kit... but the PDI is cone shaped and the Laylax "pro" is impossible to find...

Getting the PDI one turned down flat to install srobo on it

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 15th, 2009, 15:31	#1
DarkkillA Trader rating Join Date: May 2009 Location: north vancouver	Vsr 10 Piston Problem Hey i bought a Vsr 10 and it works good but i also have a new Piston but the problem is that the piston does not fit in, i can screw it in down to the end of the cylinder head threads but then it will not go any further. Where as the stock piston just slides in and out with out any screwing or any problem. (i know there is no o-ring on the stock one it is on the new one since it is tighter than the one that the new one came with) Is there a way to decrease the size of the white ring's evenly to make it slide in or go in properly to work how it is made to? Any help would be great and much appreciated thanks in advance to anyone that helps Dan

June 15th, 2009, 16:44	#5
DarkkillA Trader rating Join Date: May 2009 Location: north vancouver	Alright I now can put it in and it acts the same as the original except that it makes the spring scratch against the sides of the cylinder where the original does not Last edited by DarkkillA; June 15th, 2009 at 19:05..

July 20th, 2010, 04:27	#7
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	Vsr 10 Piston Problem I've worked on many vsr10 snipers and I can tell ya that yes it will work if u very very carefully grind down the white polyethylene buffers to the same diameter as the metal however id reccomend going with the laylax cylinder upgrade instead. Worth the money and also not having the headache of wrecking a very expensive piston __________________ "Creator of the Zombat Sniper - oh yeah baby"

June 15th, 2009, 16:19	#2
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	is it a bore up piston? and are you using a laylax cylinder with a laylax piston? Or are you mixing and matching parts?

June 15th, 2009, 16:41	#4
damage Trader rating Join Date: Jan 2005 Location: Port Coquitlam, BC	The piston ring(2 white POM ring) is large. It will fit with a little modification

July 20th, 2010, 03:54	#6
vsrsnipersquad Trader rating Join Date: Jul 2010 Location: ontario	hey dude, i have the same problem and purchased the orange piston from airsoft gi. Everything i have is stock but this orange piston. I dont know if it will work but after having conversations with proffessionals they said this would fix a slam firing problem. Im pretty sure that the red one is for a fully updated upgrade system. The orange one is 35 bucks from the us if your interested. ill talk again when i get it and see if it works.

July 28th, 2010, 17:21	#9
vsrsnipersquad Trader rating Join Date: Jul 2010 Location: ontario	well this orange one with all the stock internals is crazy, if you pull the bolt back slowly, then it doesnt work at all, it just jumps over like the previous time. If you really slam the bolt back, then it catches but the second you try to put it forward it slams. I am pretty sure that this means the piston sear is worn, but if this orange one isnt designed for the stock trigger then i could be wrong. Im not that sure but i think im gonna send it back to buy airsoft to get it fixed by there technician.

July 28th, 2010, 17:24	#10
Amos Trader rating Join Date: Aug 2006 Location: Japan	... All these new threads about people trying to build cheap VSR-10's are starting to give me a headache... __________________ Custom Builds: FA3674U Krinkov G3SD6

July 28th, 2010, 17:40	#11
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	...kind of hurts your soul a bit doesn't it...

July 28th, 2010, 17:42	#12
Amos Trader rating Join Date: Aug 2006 Location: Japan	My VSR's sitting disassembled in her case right now rocking back and forth crying to herself while she waits for the cylinder head to go out and come back from the machinist.. __________________ Custom Builds: FA3674U Krinkov G3SD6

July 31st, 2010, 01:42	#14
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	hehehe i have 4 laylax pro's sitting on me desk right now :P right enough they're all going into custom guns I'm building for ppl but i'll see if I can locate another for ya if ur stuck kos-mos ;D __________________ "Creator of the Zombat Sniper - oh yeah baby" Last edited by CJay; July 31st, 2010 at 01:48..

Vsr 10 Piston Problem

Doctor's Corner