|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 17th, 2009, 19:02 | #1 |
Kraken Ak-47 is jamming
i have a aftermath kraken and it ran fine with the 1000bb's that came with it.but then i started using the 20.g's i got from walmart and it started jamming if i go in full auto.and also jams sometimes in semi.so i was wondering if the walmart bb's could effect the guns prefomence.and if so what bb's should i use.
|
|
May 17th, 2009, 19:38 | #2 |
Solution: Don't use Walmart BB's.
Use something good like BB Bastard, KSC, or Madbull. |
|
May 17th, 2009, 20:18 | #3 |
It could be the BB diameter that's making it jam in the barrel. Are you using seamless BB's? EDIT: That was two thoughts. If the BB diameter is too wide or if the BB's have seams. One will make it jam, the other may make it jam but will most likely chew up the inner barrel.
I had this problem with one of my own guns the solution was to just switch Bb brands (I ended up using Madbull, BB Bastard, and Metal Techs exclusively). Theoretically though, your gun shouldn't be "that" finicky for certain brands of BB's.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE Last edited by L473ncy; May 17th, 2009 at 21:46.. |
|
May 17th, 2009, 20:39 | #4 |
The wall mart by me has got 0.20g bb's called arctic white that are bio and made by cybergun. They have given me no problems.
|
|
May 17th, 2009, 20:41 | #5 |
asexual lumbricus terrestris
|
they usually have seams or are made inconsistantly, they will damage your inner barrel as well as get jammed in there. go on ASC mart, airsoftparts, ect ect. Since your inner barrel is 6.08, any BBs those places sell will do fine.
|
May 18th, 2009, 13:44 | #6 |
alright ill buy some bb bastards
|
|
May 18th, 2009, 13:49 | #7 |
It pains me to read about Wal Mart BB's being cycled through an AEG... Make it stop!!
__________________
I knew a man once who said "Death smiles at us all. All a man can do is smile back." |
|
May 18th, 2009, 14:19 | #8 |
asexual lumbricus terrestris
|
Well it's a cheap AEG anyways. May want to consider a new inner barrel depending on how badly that thing's been scratched up. You can use walmart BBs for M203 shells if you ever get one. (unless it's one of those shells with the non-adjustable hop-up thingy, then all seams will do is tear those.
|
May 18th, 2009, 16:05 | #9 |
Banned
|
i have the kraken too and the BBs 0.20 bio from walkmart are crap.Dont use that into you gun.A litle invice change you hopup and put a prowin hopup they are in metal and they are for sale on airsoftpart.ca.Use a quality BBs and you will never jamming again.Have a great day
|
May 18th, 2009, 16:31 | #10 |
vision impaired
|
Not sure of the .2's I found from wal-mart's brand but they feed fine in everything I've used, the only problem we noticed is that they aren't polished, No seams or nothing just not polished.
|
May 18th, 2009, 16:32 | #11 |
As mentioned, the BB is of irregular diameter – as you put them in the magazine, don’t dump them in let them flow inspecting the BB’s as they pass from the container to your magazine. By doing this you can usually spot irregular and odd-shaped BB’s and remove them before you fire them thru your hop up. I’ve had VA BB’s that look like bullets, which if not caught when putting it in the magazine would have jammed the magazine or jammed the rifle.
Or maybe you're using too much hop up. Turn off your hop up, fire a couple shots – see where your BB’s are going and adjust accordingly. My JG SiG 552’s hop up is very forgiving, if there's not enough hop up, the BB will just roll out of the barrel. I adjust the hop up according to that; once the BB stopped rolling out – I fired until it was straight. I was having jamming problems with this rifle until I realized that it was due to too much hop up used. Due to availability in my area, a lot of airsofters use Walmart BB’s, and once you understand the dynamics of these two important steps – your jamming problems will be a thing of the past. IMO - there's nothing wrong with Walmart's .20 Bio-BB's... run what you got! Cheers! |
|
May 18th, 2009, 16:55 | #12 |
no didnt work.fired 2 shots then jammed.so i unjammed it changed hop up again and didnt work.so i unjammed it changed hop up again jammed.
|
|
May 18th, 2009, 17:34 | #13 |
OK, this might sound crazy... but is your battery fully charged?
My buddy has a kraken and it was jamming - I tore it down to the barrel and hop up to see why it would be jamming and everything seemed fine. Lubed and cleaned it, put it together and everything seemed fine, firing about 50 rounds with no jamming. The next day, it jammed. I figured it might have been the mechbox, but on a whim I tried a fully charged battery and he’s had no jamming problems since… |
|
May 18th, 2009, 17:37 | #14 |
ok man ill try it.
|
|
May 19th, 2009, 08:03 | #15 |
There they same BB's THAT are giving him the problem..READ THE THREAD
__________________
Loadout: ICS M4A1 Carbine Accessories 2 m4 hi-caps, 5 m4 mid caps houston vest |
|
|
Bookmarks |
|
|