|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
May 16th, 2009, 17:30
|
#1 |
|
MP5 butt stock problem
Hi everyone!
I recently bought a Jing Gong model M5-J. It's been working great but there is a problem with the collapsible stock. It came in the box half-way out, which is probably normal, but since I got it all the way in, I can't get it out. The manual says that it's supposed to ''jump out'' when the lever is pulled but it's not working. Is there some kind of switch that I should pull to? I tried injecting some lube in the slide, doesn't work. I pulled really hard, doesn't work. Thanks for the help! |
|
|
|
May 16th, 2009, 17:36
|
#2 |
|
You should just be able to swing the lever to the side and pull the stock out at the same time.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
May 16th, 2009, 17:39
|
#3 |
|
maybe the slides stop and spring were putted wrong inside causing it to perma-lock the slides, if its not working when pressing the stock lever on the side the dissasemble the stock and check then little catch and spring, go to mechbox.com for a mp5j dissasembly video
__________________
 member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry Last edited by lemegacool; May 16th, 2009 at 18:01.. |
|
|
|
|
May 16th, 2009, 18:05
|
#4 |
|
JG sliding stocks are stiff when they're new. Takes a while to get it worked in and nice and smooth. And they're not spring loaded. You have to pull it. It doesn't spring out.
__________________
|
|
|
|
|
May 16th, 2009, 20:31
|
#5 |
|
|
Thank you very much!
I dissambled it and was able to slide the stock. It is still stiff but it's a great improvement! |
|
|
|
|
May 16th, 2009, 20:58
|
#6 |
|
|
It'll get smoother with time. Try a little silicone oil in the channels too. That'll help it move easier.
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
