Low cap/Mid Cap question

[FlyingCats]

Hello, may you guys please tell me where i can get a so-called "Loader" for my mid-caps?

Thanks.

[TCLP]

Most online retailers sell them but if your paying for them get the ggod ones like King Arms or TM as they will last forever if you get these ones.

[FlyingCats]

Originally Posted by TCLP

Most online retailers sell them but if your paying for them get the ggod ones like King Arms or TM as they will last forever if you get these ones.

Thanks and i forgot to mention and the grand question from me...

WHAT THE FUCK ARE THEY CALLED

[TCLP]

Speed loaders. KA has them in 200rounders(pistol mag sized) and M4 mags styles. TM has 115round pistol mag ones and there m4 speed loaders work alot!!!!! better than the KA ones and they only cost about $1US.

[FlyingCats]

Wait is this it?

[TCLP]

yes

[FlyingCats]

Originally Posted by TCLP

yes

Thanks man.

[incrediboy729]

Or you can cheap out like me and take a old springer rifle barrel (or some other pipe) and a dowel and go from there! Attach a bb container "speed filler" funnel to the top, a little tape, and you are good to go!
But then again most people aren't as cheap as i am

[Shirley]

I bought mine from ebay, 2x 120 round loaders for 3$ with shipping. And they lasted 2 years of dropping and bashing from all the shit in my bag. The thing that is so annoying is it the pusher that pops up always pops up form the loose safety.

[Erennert]

Same here, my King Arms one pops out with even a little bump sometimes. Kinda annoying but overall, very helpful.

[pusangani]

i have one from VA, the 100 rd ones, works great, the dboys 300rd m4 style ones are pure crap tho

[TokyoSeven]

Over the years Ive used and abused and lost atleast a dozen of the TM brand pistol mag sized loaders. Never broken one, but I find more often than not that I just miss place or lose them. Their fairly durable and operate rather smoothly. Ive handled a few of the lower end copies and they do not seem to operate as smoothly and are not made from the same quality material, but whatever gets the job done I suppose.

[TCLP]

Originally Posted by TokyoSeven

Over the years Ive used and abused and lost atleast a dozen of the TM brand pistol mag sized loaders. Never broken one, but I find more often than not that I just miss place or lose them. Their fairly durable and operate rather smoothly. Ive handled a few of the lower end copies and they do not seem to operate as smoothly and are not made from the same quality material, but whatever gets the job done I suppose.

Agreed, even the KA m4 style ones aren't that great, there pistol mag loaders work wonders. But if you get one of the m4 style ones you have to get a TM one. Hell Darklen on these forums has had the same TM loader since he started and its still yet to break.