GHK AK74SU Gas Blow-Back Rifle

aZn_triXta07 · March 4th, 2009, 20:07

Hey all just decided to do a quick review for those looking into this.

I have the Kalash Version, if you want the best out there grab the VFC version, essentially you'll have a better look and feel.

However I want to focus mainly on the GHK parts itself as that's what matters.

To make things simple, out of the box it preforms well, however the magazine likes to cool down quite a bit so that's a turn off.

Items to replace, if you're getting the drop-in kit I suggest you avoid getting the stock parts from the beginning.

Plastic Bolt (cracks in two after couple hundred rounds)
Plastic Hop Up (it's plastic....piece that releases BBs breaks easily)
Bolt Carrier (It'll mash itself up eventually, esp with an aluminum bolt installed)

As of now I have the steel bolt carrier and hammer coming from DaytonaGun which is costing me about $230CAD not including taxes/duty.

Aluminum Bolt and Metal Hop Up are costing me about $130CAD.

Other upgrades? Well the inner barrel and hop up rubber are the same as ones you'd find in an AEG so you might as well switch'em out for a tightbore and maybe even a longer barrel and cover it with a PBS-5 silencer for increased accuracy/better groupings.

I have two propane magazines and one CO2 magazine on the way as well.

Stay tuned.

Qlong · March 4th, 2009, 20:12

Linky no workie

ancorp · March 4th, 2009, 20:16

Hopup

Bolt Carrier

Amos · March 4th, 2009, 20:26

lol.. that looks like some quality stuff...

No wonder Daytonagun is making good versions of it... Why doesn't he just product his own kit?

aZn_triXta07 · March 5th, 2009, 15:55

Links fixed.

DaytonaGun makes his own Classic Airsoft guns, they are all too pricey and there's not enough interest in Canada.

If people learned to stop hating on the hose than the cost of these landed could be just a bit over PAR of what the cost of one would be.

Internals are all steel, all personally tuned and built by Justin, they don't jam nor will they wear out ... unless you crank up the PSI to 200 lol

Quote:

Originally Posted by Amos

lol.. that looks like some quality stuff...

No wonder Daytonagun is making good versions of it... Why doesn't he just product his own kit?

Qlong · March 5th, 2009, 16:37

Hmm.. does the bolt carrier have enough clearance to be re-enforced with something?

Also what does the stock bolt look like?

Lakonian · March 5th, 2009, 16:39

How can I get a Datonagun kit for my AK74 ? I'd be fucking interested....

KND · March 5th, 2009, 16:58

http://www.classicairsoft.org/forum/index.php

aZn_triXta07 · March 6th, 2009, 01:32

Quote:

Originally Posted by kos

How can I get a Datonagun kit for my AK74 ? I'd be fucking interested....

He just went out of his own way to make steel bolt carriers and two other pieces for the GHK AK74SU, I guess the dimensions aren't too far off from his AK.

As far as I know there are no drop-in kits for Justins stuff except for the M249.

Quote:

Originally Posted by Qlong

Hmm.. does the bolt carrier have enough clearance to be re-enforced with something?

Also what does the stock bolt look like?

Qlong, I will post some pics up tommorow evening of my broken plastic bolt for you all to see.

As for the stock bolt carrier I think if you smoothen out the edges in the receiver and maybe add a rubber pad to cushion it, it might reduce the stress on the bolt carrier but you'd lose the nice clingy clangy noise when you shoot the gun :P

Lakonian · March 6th, 2009, 01:44

Quote:

Originally Posted by aZn_triXta07

He just went out of his own way to make steel bolt carriers and two other pieces for the GHK AK74SU, I guess the dimensions aren't too far off from his AK.

That's what I meant

Forgot the "U".

I have the newest gen Kalash AK74U (RK01S) ..

Danke · March 6th, 2009, 01:55

Do you need to make an irrevesable changes or is it a drop in/drop out?

aZn_triXta07 · March 6th, 2009, 02:00

Quote:

Originally Posted by Danke

Do you need to make an irrevesable changes or is it a drop in/drop out?

I wouldn't be too sure as I never had the AEG, I wouldn't say they are irreversable changes, but I would need to compare with a regular Kalash AK.

Qlong · March 6th, 2009, 02:04

Red Noir ordered a kit a couple months ago, he currently has pictures of the entire gun with the internals installed, probably PM him would be some help.

As for irreversible changes, someone mentioned on ASC, that the outer barrel needed to be cut a bit short for the hop-up unit. However this shouldn't affect you changing it back to an AEG.

I've got an RK01s, maybe we can compare it sometime. Btw, how did those VFC mag shell mods go?

Lakonian · March 6th, 2009, 02:12

Quote:

Originally Posted by Qlong

I've got an RK01s, maybe we can compare it sometime. Btw, how did those VFC mag shell mods go?

IIRC, you have a regular RK01, not the "S". Not that it matters much. I think they're both exactly the same (receiver wise).

aZn_triXta07 · March 6th, 2009, 02:12

I didn't bother, I don't have the know-how to do so lol.

Wonder how Red Noirs is holding up, judging by how long my internal bits held up I'm sure he would be getting upgraded parts too.

Cutting the outer barrel is only for the full size guns. Comparing should be interesting, RA-TECH parts are on the way ... just hope that Justin already has those steel parts ready to ship out.

Quote:

Originally Posted by Qlong

Red Noir ordered a kit a couple months ago, he currently has pictures of the entire gun with the internals installed, probably PM him would be some help.

As for irreversible changes, someone mentioned on ASC, that the outer barrel needed to be cut a bit short for the hop-up unit. However this shouldn't affect you changing it back to an AEG.

I've got an RK01s, maybe we can compare it sometime. Btw, how did those VFC mag shell mods go?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 4th, 2009, 20:07	#1
aZn_triXta07 Trader rating Join Date: Nov 2005 Location: Toronto, Ontario	GHK AK74SU Gas Blow-Back Rifle Hey all just decided to do a quick review for those looking into this. I have the Kalash Version, if you want the best out there grab the VFC version, essentially you'll have a better look and feel. However I want to focus mainly on the GHK parts itself as that's what matters. To make things simple, out of the box it preforms well, however the magazine likes to cool down quite a bit so that's a turn off. Items to replace, if you're getting the drop-in kit I suggest you avoid getting the stock parts from the beginning. Plastic Bolt (cracks in two after couple hundred rounds) Plastic Hop Up (it's plastic....piece that releases BBs breaks easily) Bolt Carrier (It'll mash itself up eventually, esp with an aluminum bolt installed) As of now I have the steel bolt carrier and hammer coming from DaytonaGun which is costing me about $230CAD not including taxes/duty. Aluminum Bolt and Metal Hop Up are costing me about $130CAD. Other upgrades? Well the inner barrel and hop up rubber are the same as ones you'd find in an AEG so you might as well switch'em out for a tightbore and maybe even a longer barrel and cover it with a PBS-5 silencer for increased accuracy/better groupings. I have two propane magazines and one CO2 magazine on the way as well. Stay tuned. Last edited by aZn_triXta07; March 5th, 2009 at 15:53.. Reason: fixed links

March 4th, 2009, 20:12	#2
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Linky no workie __________________ Weee!

March 4th, 2009, 20:26	#4
Amos Trader rating Join Date: Aug 2006 Location: Tokushima, Japan	lol.. that looks like some quality stuff... No wonder Daytonagun is making good versions of it... Why doesn't he just product his own kit? __________________ Custom Builds: FA3674U Krinkov G3SD6

March 4th, 2009, 20:16	#3
ancorp AK Guru Trader rating Join Date: Mar 2005 Location: Vaughan, Ontario (near Toronto)	Hopup Bolt Carrier

March 5th, 2009, 16:37	#6
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Hmm.. does the bolt carrier have enough clearance to be re-enforced with something? Also what does the stock bolt look like? __________________ Weee!

March 5th, 2009, 16:39	#7
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	How can I get a Datonagun kit for my AK74 ? I'd be fucking interested....

March 5th, 2009, 16:58	#8
KND * AV revoked * Trader rating Join Date: Apr 2008 Location: Downtown Montreal	http://www.classicairsoft.org/forum/index.php __________________

March 6th, 2009, 01:55	#11
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Do you need to make an irrevesable changes or is it a drop in/drop out?

March 6th, 2009, 02:04	#13
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Red Noir ordered a kit a couple months ago, he currently has pictures of the entire gun with the internals installed, probably PM him would be some help. As for irreversible changes, someone mentioned on ASC, that the outer barrel needed to be cut a bit short for the hop-up unit. However this shouldn't affect you changing it back to an AEG. I've got an RK01s, maybe we can compare it sometime. Btw, how did those VFC mag shell mods go? __________________ Weee! Last edited by Qlong; March 6th, 2009 at 02:06..

GHK AK74SU Gas Blow-Back Rifle

Reviews