Upgrade TM AK47 to 350fps

[brusbilis]

Hello all,

I have a TM AK47 (all stock) and I'd like to get it to 350fps to give it more field range.

Can folks list what parts they'd recommend for this gun to handle the power?

I'm thinking about :
- Spring Guarder SP100
- Guarder bearing spring guide v3
- Madbull 6.03mm precision barrel 455mm

Thanks in advance

[Crunchmeister]

If you're going to have the mechbox open to upgrade the spring and guide, you should probably also invest in some metal bushings to replace the stock TM nylon bushings. That's usually the first upgrade you want to perform on a stock TM before putting in a heavier spring.

[Styrak]

You really only need the spring. If you have the cash then get the bearing spring guide (it's really not that expensive anyway) and like was said, metal bushings are always a good idea. You only need the inner barrel if you wanted improved accuracy and a little more FPS.

Also, a Guarder SP100 will give you around 380 FPS, so a little hot for what you want.

[Splashx]

you may try prometheus sp100 too!

and as Styrak & Crunchmeister said:
-steel bushings with appropriate shimming, systema or guarder
-spring guide, guarder is fine and cheap, why not installing it while you open the mechbox? Never hurts
-inner barrel, your choice and budget

you may watch for mAh available on your battery, power may last a little less than it is now because of the increased demand for the harder spring.

but it's a good debut for a mild upgraded aeg

[brusbilis]

No problem with the battery. It's an 8.4V and 3300 mAh.

[Splashx]

Originally Posted by brusbilis

No problem with the battery. It's an 8.4V and 3300 mAh.

hehe I agree