|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 28th, 2006, 20:41
|
#1 |
|
Banned
|
which spring guide does everyone like the best?
im planning on getting a spring guide...any good recommendations anyone?I have a TM m733 commando with the following:
promethius ak47 length titebore guarder steel bushings with dual oil chambers systema duracon pistonhead guarder sp120 spring |
|
|
|
August 28th, 2006, 20:48
|
#2 |
|
Any version two with ball bearings. They will cause a slight increase on your FPS due to the bearings compressing your spring a few mm's. They all basically do the same job. I have them installed on all my guns although IMO they don't really do all that much.
__________________
Few individuals would view themselves as barbarous, no, instead they view themselves in a different light, a distorted reality that justifies who they are and what they have done. |
|
|
|
|
August 28th, 2006, 21:03
|
#3 |
|
Banned
|
reason why im askin this is, so far ive had 2 ppl suggest me promethues but they are 5 bux more expensive that guarder or systema or any other brand...money is not an issue since its only a few bux..i just want ppls opinions on which one did they use and thought it worked good. thanks
|
|
|
|
|
August 28th, 2006, 21:12
|
#4 |
|
|
They basically make little to no difference. It's almost like saying the blue spring guides work better than red because blue is a more popular color.
__________________
Few individuals would view themselves as barbarous, no, instead they view themselves in a different light, a distorted reality that justifies who they are and what they have done. |
|
|
|
|
August 28th, 2006, 22:56
|
#5 |
|
Official ASC Bladesmith
|
I put a Guarder bearing spring guide in my MP5 with a PDI 150% spring shooting a pretty consistant 352fps, and my velocity went up to 370fps with 0.20g BBs and hop up off (hop up on, sat at 365fps). So a bearing spring guide WILL add to your fps, but not a huge amount, 10-15fps if lucky (also found a 15fps increase in my CA M24 with the addition of a bearing spring guide).
And it doesn't really matter the brand you buy, just as long as it's meant for the version of mechbox you have (in your case, a version 2). They are also made out of solid metal, so you won't run any chance of a broken spring guide (I've seen 2 TM stock spring guides bust, a bearing one is a good reliability upgrade). |
|
|
|
|
August 29th, 2006, 01:04
|
#6 |
|
Banned
|
Prometheus spring guide. Very nicely build and a bit more expensive than the Systema spring guide. The prometheus spring guides are "claimed" as the smoothest ball bearing spring guide out on the market. I don't know about the Guarder ones though since I have no experience with them.
I'm using a Airsoft Surgeon Stage 2 on my setup right now. However the gun has been shooting with no problem. |
|
|
|
|
August 29th, 2006, 05:21
|
#7 |
|
Banned
|
hmmm...yup that was my first choice..prometheus. but i also hear guarder makes great guides as well..i was only thinking of choosing guarder because i will be buying a guarder cylinder head, guarder airseal, guarder bushings and i have a guarder spring ...might as well stick with guarder. since its a tad cheaper...but when they claim to have the smoothest ball bearing...very tempting. hehe
|
|
|
|
|
August 29th, 2006, 13:14
|
#8 |
|
Banned
|
I mix and match, so I know that I am getting the best quality parts inside my gun! I have a prometheus spring guide and the gun seems to love it with my Airsoft Surgeon spring. Guarder everything eh? There cheaper than any other brand. However I am not sure about quality... Never tried. Except for my metal bushings which I still have to test out.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
