What guns need improvement or don't exist?

sukivan · August 22nd, 2006, 06:42

I've been tossing around the idea of starting a North American airsoft manufacturer and I need to find out what the market here is like. To this end, I'd like to know what guns the airsoft community would most like to see remade (current manufacturer(s) of gun are doing poor job, etc) or made for the first time (gun does not exist or is difficult to obtain, ie barrett).

Kuraitenshi · August 22nd, 2006, 06:56

like to see metal body famas. Plastic sux.

Greylocks · August 22nd, 2006, 07:11

If you manage it, some of the classics. FN-FAL, the Lee Enfield (to countermatch the Mausers).
In Canada, you should be able to find tons of original Lee Enfield parts to make that gun look better, same for the FAL.

This being said, many have had that idea before. It's expensive, and the red tape comes by truck. I hope you are rich or that you have rich backers.

attack-beaver · August 22nd, 2006, 09:04

yeah the FAL is a big one for me as well, a AEG galil would be great and YES a lee-enfield would be amazing the No.4 MkII is my personal fave.

one big thing i would kill to get made is HK79 40mm under barrel gernade lancher for the G3A3 (but in todays market the SG1). i would also like to see the old A3's get made again but with the wood furnitune not that plastic shit.

then for a pistol a Mateba Model 6 Unica

Bob the Angry Potato · August 22nd, 2006, 09:31

Quote:

Originally Posted by Kuraitenshi

like to see metal body famas. Plastic sux.

Seconded.

This has been guaged before- despite the real FAMAS being plastic, there's a lot of FAMAS owners out there without access to replacement parts, upgrade parts and others. Hell, if someone milled a metal upper-receiver with a different handle (FAMAS Sniper handle, or rail, anyone?), I'm sure a lot of people will snap that up.

... apart from that,

FN F-7 :-D

Kuraitenshi · August 22nd, 2006, 10:09

Quote:

Originally Posted by Bob the Angry Potato

Quote:

Originally Posted by Kuraitenshi

like to see metal body famas. Plastic sux.

Seconded.

This has been guaged before- despite the real FAMAS being plastic, there's a lot of FAMAS owners out there without access to replacement parts, upgrade parts and others. Hell, if someone milled a metal upper-receiver with a different handle (FAMAS Sniper handle, or rail, anyone?), I'm sure a lot of people will snap that up.

... apart from that,

FN F-7 :-D

The real palastic Famas dosen't creak. metal body dosen't henc my plastic sux comment.

Also like to see:
Browning M1917 water cooled
and
Robson Armerments M96 or Bren gun MKI

Gryphon · August 22nd, 2006, 10:35

I'd give my left nut for an AKMS. A proper AKMS, not a converted milled receiver.

Bob the Angry Potato · August 22nd, 2006, 10:56

Quote:

Originally Posted by Kuraitenshi

Quote:

Originally Posted by Bob the Angry Potato

Quote:

Originally Posted by Kuraitenshi

like to see metal body famas. Plastic sux.

Seconded.

This has been guaged before- despite the real FAMAS being plastic, there's a lot of FAMAS owners out there without access to replacement parts, upgrade parts and others. Hell, if someone milled a metal upper-receiver with a different handle (FAMAS Sniper handle, or rail, anyone?), I'm sure a lot of people will snap that up.

... apart from that,

FN F-7 :-D

The real palastic Famas dosen't creak. metal body dosen't henc my plastic sux comment.

Also like to see:
Browning M1917 water cooled
and
Robson Armerments M96 or Bren gun MKI

It wasn't supposed to.
I've had this conversation before, metal parts on a FAMAS would just be... badass. It's got little to do with the creaking.

Kuraitenshi · August 22nd, 2006, 11:09

Quote:

Originally Posted by Bob the Angry Potato

Quote:

Originally Posted by Kuraitenshi

Quote:

Originally Posted by Bob the Angry Potato

Quote:

Originally Posted by Kuraitenshi

like to see metal body famas. Plastic sux.

Seconded.

This has been guaged before- despite the real FAMAS being plastic, there's a lot of FAMAS owners out there without access to replacement parts, upgrade parts and others. Hell, if someone milled a metal upper-receiver with a different handle (FAMAS Sniper handle, or rail, anyone?), I'm sure a lot of people will snap that up.

... apart from that,

FN F-7 :-D

The real palastic Famas dosen't creak. metal body dosen't henc my plastic sux comment.

Also like to see:
Browning M1917 water cooled
and
Robson Armerments M96 or Bren gun MKI

It wasn't supposed to.
I've had this conversation before, metal parts on a FAMAS would just be... badass. It's got little to do with the creaking.

I am glad we can agree that metal famas would kick ass.

jerryliang2k · August 22nd, 2006, 11:30

I'd also like to see some metal FAMAS parts. In addition to that, an airsoft FN2000 would kick ass.

SovietHippie · August 22nd, 2006, 12:15

Definetly A XM109 and a CZ110(We have a lack of Russian/east bloc pistols)
and I second a Galil, that or a Tavor. Though man, I would buy a XM109 in a second if they came out with that.

The Saint · August 22nd, 2006, 12:32

I'd give someone's right nut for a metal shotty based off TM's current shotgun line, with four instead of three inner barrels if possible. The Mateba would also be nice, especially if they make the Ghost in the Shell versions as well.

owner · August 22nd, 2006, 13:28

A sten MKII or MKIII gas blowback for sure

^Hyperion^ · August 22nd, 2006, 14:10

Tavor-21 for sure , plus a Barrett M82 and M95 somebody on this earth can afford

Rumpel Felt · August 22nd, 2006, 14:26

Quote:

Originally Posted by The Saint

I'd give someone's right nut for a metal shotty based off TM's current shotgun line, with four instead of three inner barrels if possible. The Mateba would also be nice, especially if they make the Ghost in the Shell versions as well.

I second that. Three barrels are perfect though.

In fact, a better anything of TM's lame old plastic would do.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 22nd, 2006, 06:42	#1
sukivan Trader rating Join Date: Jul 2006 Location: vancouver	What guns need improvement or don't exist? I've been tossing around the idea of starting a North American airsoft manufacturer and I need to find out what the market here is like. To this end, I'd like to know what guns the airsoft community would most like to see remade (current manufacturer(s) of gun are doing poor job, etc) or made for the first time (gun does not exist or is difficult to obtain, ie barrett).

August 22nd, 2006, 06:56	#2
Kuraitenshi Trader rating Join Date: Jul 2006 Location: NewWestminster	like to see metal body famas. Plastic sux. __________________ I AM LOST!! join me... http://www.lost.eu/3a30b I am worth $2,064,160 on http://www.HumanForSale.com

August 22nd, 2006, 11:30	#10
jerryliang2k Trader rating Join Date: Oct 2004 Location: Mississauga, ON	I'd also like to see some metal FAMAS parts. In addition to that, an airsoft FN2000 would kick ass. __________________ Primary - CA M249 - Systema PTW Sidearms - KWA G18c - WE 1911

August 22nd, 2006, 07:11	#3
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	If you manage it, some of the classics. FN-FAL, the Lee Enfield (to countermatch the Mausers). In Canada, you should be able to find tons of original Lee Enfield parts to make that gun look better, same for the FAL. This being said, many have had that idea before. It's expensive, and the red tape comes by truck. I hope you are rich or that you have rich backers.

August 22nd, 2006, 09:04	#4
attack-beaver Trader rating Join Date: May 2005 Location: calgary	yeah the FAL is a big one for me as well, a AEG galil would be great and YES a lee-enfield would be amazing the No.4 MkII is my personal fave. one big thing i would kill to get made is HK79 40mm under barrel gernade lancher for the G3A3 (but in todays market the SG1). i would also like to see the old A3's get made again but with the wood furnitune not that plastic shit. then for a pistol a Mateba Model 6 Unica

August 22nd, 2006, 10:35	#7
Gryphon Trader rating Join Date: Mar 2005 Location: MB	I'd give my left nut for an AKMS. A proper AKMS, not a converted milled receiver.

August 22nd, 2006, 12:15	#11
SovietHippie Trader rating Join Date: Jan 2006 Location: Orangeville, Ontario	Definetly A XM109 and a CZ110(We have a lack of Russian/east bloc pistols) and I second a Galil, that or a Tavor. Though man, I would buy a XM109 in a second if they came out with that.

August 22nd, 2006, 12:32	#12
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	I'd give someone's right nut for a metal shotty based off TM's current shotgun line, with four instead of three inner barrels if possible. The Mateba would also be nice, especially if they make the Ghost in the Shell versions as well. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

August 22nd, 2006, 13:28	#13
owner Trader rating Join Date: Apr 2006 Location: Canada	A sten MKII or MKIII gas blowback for sure

August 22nd, 2006, 14:10	#14
^Hyperion^ Trader rating Join Date: Jan 2006 Location: Montreal , Quebec	Tavor-21 for sure , plus a Barrett M82 and M95 somebody on this earth can afford __________________

What guns need improvement or don't exist?

Airsoft Guns Discussion