|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 25th, 2006, 20:37 | #1 |
dry firing/ misfeeding g36. Help!
I have a G36 with a version 3 gearbox. The upgrades are:
-M140 -Guarder bore up kit -Sytema Super torque up gears -systema EG1000 -sytema reverse latch -9.6V battery Ok basically, the gun was working fine earlier this week, but now i'm having trouble with it feeding BBs. On full auto I can hear it dry firing. So I made a sector chip and it still does it, as well as when I turn the gun upside down. Hop up is turned off, and I have experiencecd this with all 3 of my hicaps. Whats wrong? thanks in advance |
|
June 25th, 2006, 20:47 | #2 |
Does it fire at all?
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
June 25th, 2006, 21:32 | #3 |
on semi it fires, but on auto, every 3 or 5 shots you can here it dryfire as the tone of the gun changes
|
|
June 26th, 2006, 12:11 | #4 |
I have the whole gearbox stipped sown, and i'm gonna clean everything. What should I check for?
|
|
June 26th, 2006, 12:31 | #5 |
Official ASC Bladesmith
|
Too bad you don't have any locaps, I'd check that first. At one point both my MP5 hicaps weren't feeding. Try winding your mag, then pull the spring catch and see if the BBs shoot out the top of the mag. All it takes is one strategically placed grain of sand to bring a hicap to a fast halt (happened in one of my hicaps, grain of sand lodged in a gear and my BBs whouldn't raise up the tube.)
Might also want to try getting a bit of oil into the breech to see if maybe things are just sticky there. |
June 26th, 2006, 13:29 | #6 |
Banned
|
i had the same probblem with my g36 to fix it try firing a few rounds on semi then hold the trigger down while on full auto some times it works sometimes it doesn`t..
If that doesn`t work try taking to an expert on airsoft guns he might be able to help you out |
June 26th, 2006, 21:19 | #7 |
well I think I got it fixed. I just took apart the entire gearbox and gave it a good cleaning
|
|
June 27th, 2006, 00:48 | #8 |
"Think?"
Put it back together and know for sure... |
|
|
Bookmarks |
|
|