where to get kjw usp valve key?

airsoftassasin125 · January 9th, 2006, 21:10

does anyone know where i can get a valve key for a kjw usp and how much would it cost
thnx in advance!

ps. do not buy kjw usp. they blow big fat ****

CDN_Stalker · January 9th, 2006, 22:08

Needle nosed pliers work fine for me on all my GGB mags (as far as the release valve goes.) Fill valve, slotted screwdriver works just fine.

mirage13 · January 9th, 2006, 22:30

What problems have you had with your USP?

airsoftassasin125 · January 10th, 2006, 20:47

well, the flow valve was leaking, but i put some silicone oil and it was working fine after i let it sit for a bout 3 hrs

airsoftassasin125 · January 11th, 2006, 02:35

wait. do I really need a new flow valve or can i just get new O-rings for the valve.

Tex · January 11th, 2006, 04:49

i found that after soaking in oil my kjw mags worked fine but if i used all the gas it would happen again so i would refill when i noticed power loss. on one i did need a new valve but it was $6 or $7 us from jungletoys or something like that

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 9th, 2006, 21:10	#1
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	where to get kjw usp valve key? does anyone know where i can get a valve key for a kjw usp and how much would it cost thnx in advance! ps. do not buy kjw usp. they blow big fat **** __________________ .:Peace Loving Music:. :kill:

January 9th, 2006, 22:08	#2
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Needle nosed pliers work fine for me on all my GGB mags (as far as the release valve goes.) Fill valve, slotted screwdriver works just fine. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

January 10th, 2006, 20:47	#4
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	well, the flow valve was leaking, but i put some silicone oil and it was working fine after i let it sit for a bout 3 hrs __________________ .:Peace Loving Music:. :kill:

January 9th, 2006, 22:30	#3
mirage13 Trader rating Join Date: Mar 2005 Location: Toronto	What problems have you had with your USP?

January 11th, 2006, 02:35	#5
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	wait. do I really need a new flow valve or can i just get new O-rings for the valve. __________________ .:Peace Loving Music:. :kill:

January 11th, 2006, 04:49	#6
Tex Trader rating Join Date: Feb 2003 Location: Abbotsford, B.C.	i found that after soaking in oil my kjw mags worked fine but if i used all the gas it would happen again so i would refill when i noticed power loss. on one i did need a new valve but it was $6 or $7 us from jungletoys or something like that

where to get kjw usp valve key?

Accessories Discussion