|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 30th, 2018, 22:34 | #1 |
Internal upgrading help
I'm looking for some help to do internal upgrades I don't know if I should get a drop-in or if I should do the parts individually I'm an impatient person and I'm not rich LOL I don't need to shoot lines I do want a more sensitive trigger higher rate of fire for semi I was in paintball for about five to six years and I like Airsoft better and I'm ready to start upgrading my gun for the record it is an M4 I also have a Glock 17 for a sidearm that I upgrade myself as I'm quite good with pistols as for opening up a gearbox I have not yet done that nor do I have the confidence to do so I live in Richmond Hill and would be interested in meeting more people especially somebody who is very good at teching on AEG I'm playing at Siege and UA I haven't gone anywhere else as of yet but plan to eventually message me with any advice if you ever want to just hang out and chill and go over some airsoft stuff I will supply the fully legal cannabis
|
|
November 8th, 2018, 18:00 | #2 |
start with hopups on both guns. For Your M4 you can try adding a new motor that goes quite a long way.
|
|
November 19th, 2018, 15:34 | #3 |
basic upgrades: barrel, hop bucking+nub, stock unit should be fine as its already mated to the body, lipo battery, mosfet, shimjob and correct aoe.
__________________
current armament: mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.
|
|
January 17th, 2019, 21:11 | #4 |
Well to up your trigger response getting a higher volt battery helps big time
|
|
January 17th, 2019, 23:09 | #5 |
if you are new and impatient avoid opening the gearbox. Closing them can be a pain for an inexperienced person. If you are looking for at cheaper price, check out siege gearswap on 27th of jan.
__________________
Current Arsenal: AW Hi-Capa 5.1 X 2 EMG DD MK18 Cerakote VFC M4 MK18 CYMA AK47 TM MP5 First gen Rare find TM MP5A5 with swordfish 2004 |
|
January 22nd, 2019, 12:34 | #6 |
A new hopup and inner barrel, and motor is a good, quick start for upgrades. Going into the gearbox is a challenge for most and defiantly requires patience.
__________________
Together we stand. Divided we fall |
|
January 22nd, 2019, 21:31 | #7 |
Hello Kurmit,
Check out my website www.OrangevilleAirsoft.ca I can help you out! You will have to be a bit more specific on what type of M4 you have. I think what your are looking for is an ETU, Mosfet, Speed Trigger, Motor and Gearbox Shimming. This is what I generally tell customers who are looking for that snappy trigger response in semi. I look forward to hearing from you. |
|
|
Bookmarks |
|
|