Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Propane left in mags

:

Doctor's Corner

Reply
 
Thread Tools
Old November 4th, 2005, 20:44   #1
rileysault
 
Join Date: Sep 2005
Location: Winnipeg
Propane left in mags

I know there has been much talk over leaving gas in your mags. Most people recommend leaving some silicon oil impregnated gas in the mag. I was curious if i use propane with silicon oil will it degrade my seals? I have heard that it may, but others say that this has worked fine for them. It would be nice if someone cleared this up.
rileysault is offline   Reply With Quote
Old November 4th, 2005, 20:56   #2
vondnik
Ban-Fu Sifu
 
vondnik's Avatar
 
Join Date: Nov 2002
Location: Socialist republic of Kebekistan
Send a message via MSN to vondnik
To be honest you will probably never get a strait anwser. But here is some food for toughts. I have 4 TM hicapa mags that have not been used in 2 months: 3 of them had propane in them and are fine. the last one was dry empty and now leaks like a bitch.
__________________
Vondnik, team Bad Karma, PQAC

Murphy's second rule: Nothing is impossible for the man who does not have to do it himself.

vondnik is offline   Reply With Quote
Old November 4th, 2005, 21:13   #3
Blastyman
 
Blastyman's Avatar
 
Join Date: Feb 2003
Location: Edmonton ,AB
Send a message via ICQ to Blastyman
Every mag I have ever cleared the gas out and stored that way started to leak.

Every mag I stored with Gas in them have never leaked.

Draw your own conclusion's
Blastyman is offline   Reply With Quote
Old November 5th, 2005, 00:18   #4
aftica
 
aftica's Avatar
 
Join Date: Apr 2004
Location: clarington ont.
always leave a bit of gas/silicone in your mags for storage. if you are worried about the propane .... do like i do: leave a smalll shot of DUSTER/silicone in your mags. that can of duster will last a long, long time...cheap insurance.
aftica is offline   Reply With Quote
Old November 5th, 2005, 11:49   #5
Droc
Guest
though fixing it is easy enough
I have 4 TM hi-capa mags
always with gas in them, emptied it the night before the game during my prep, game day, they all leaked like crazy.

raven suggested goop
but i took the mag apart(very easy), added some silicone lube and re-assembled with some locktight on the screw(very loose).
works fine
  Reply With Quote
Old November 5th, 2005, 12:23   #6
spleen
 
spleen's Avatar
 
Join Date: Oct 2001
Location: Montreal, PQ
Here's something I've wondered...

What about 40mm grenade shells? They shipped from the factory without gas in them, and worked perfectly by the time I got them, so I'm tempted to leave them empty, but I don't want to ruin them. Are they somehow different and it's ok to leave them empty, or am I going to ruin them? I use duster, not propane, if that makes any difference.
__________________
Sgt Spleen
Salamander Army


"I know the human being and fish can coexist peacefully."
George W. Bush (1946 - Present)

"Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so."
Douglas Adams (1952 - 2001)


Quote:
Originally Posted by kuchervano View Post
Oh wow, im speechless. Crowbars and shovels... back to lurking then.
spleen is offline   Reply With Quote
Old November 11th, 2005, 11:56   #7
buzzard
 
Join Date: Apr 2005
Location: dartmouth ns
ive been looking for an answer on this question and havent been able to find it....... when stored for a while, do you leave a mag in the gun? is there any problem with that? any reason for/ or against?
__________________
aka beefhole


proud Labradorian
buzzard is offline   Reply With Quote
Old November 11th, 2005, 13:41   #8
rockeye
 
Join Date: Sep 2005
Location: P.E.I
If the mags are shipped along with the gun without gas in them, then how can leaving them empty for a day or a week cause them to leak?
rockeye is offline   Reply With Quote
Old November 11th, 2005, 17:23   #9
The Punisher
 
The Punisher's Avatar
 
Join Date: Apr 2004
Location: Hamilton, Ontario
Send a message via MSN to The Punisher
Quote:
Originally Posted by rockeye
If the mags are shipped along with the gun without gas in them, then how can leaving them empty for a day or a week cause them to leak?
From the factory they may have an oil or something in them that preserves the seals until it's used.

I don't know, just saying it's a possibility.
The Punisher is offline   Reply With Quote
Old November 11th, 2005, 17:33   #10
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
There's a belief that mags are shipped with gas.

I believe that they aren't and is merely a misconception.

"So what is that little puff of air that I get when I press the valve of a brand new mag?" I hear you asking.

That bit of air is the air you get from de-pressurization and re-pressurization as the magazine goes 30,000 feet up into the air... across the pacific ocean and on to North American soil. Combined with the incredibly cold temperatures of the cargo bay at that height and re-temperaturization once landed - what you get is an imbalance of air pressure levels between the inside of the mag versus the outside world.

Sometimes (many times), the spring on the release valve is weak enough to allow pressure to balance out between the interior and exterior of the magazine - and as a result, you don't get that same puff of air from a brand new mag.
ILLusion is offline   Reply With Quote
Old November 11th, 2005, 19:31   #11
Ducky
 
Join Date: Mar 2004
Location: Winnipeg
Send a message via MSN to Ducky Send a message via Yahoo to Ducky
Its better to leave some gas in them I can say that for certain. How you may ask? Well I used to have an M11, and during one fall game we had at night one of the mags I had fell out of my vest full of BBs and gas. Unfortunately we were not able to find the mag, and winter came along. The mag sat there on the ground through a whole Manitoba winter covered in snow, then through the spring sitting in water. During the summer when it was all dry again the mag was found, the mag still had gas and bbs in it. The mag was slightly corroded on the outside, the spring that pushes the bbs was corroded really badly. But the gas was fine still full in the mag. After we released the gas and cleaned off the mag of rust, also fixed the spring by pulling it out and cleaning it off. The mag was returned to working status, nothing was replaced, and it still holds gas fine no leaks.
Ducky is offline   Reply With Quote
Old November 11th, 2005, 20:51   #12
-Trooper-
a.k.a. Egria
 
-Trooper-'s Avatar
 
Join Date: Jul 2005
Location: Vancouver
Quote:
Originally Posted by rockeye
If the mags are shipped along with the gun without gas in them, then how can leaving them empty for a day or a week cause them to leak?
There is a little gas or air in new mags. Once when I bought a TM Desert Eagle mag, I took it out of the package and played around with it. I pushed the gas valve release and I heard a little gas come out.
__________________


PURVEYOR OF FINE PARACORD PRODUCTS

www.beaconconceptsco.com

Click Here For ASC Thread

Team GHOSTS - G86
-Trooper- is offline   Reply With Quote
Old November 11th, 2005, 21:35   #13
HGI
 
HGI's Avatar
 
Join Date: Dec 2003
Location: Nanaimo
I've owned a KWA glock 19 for over a year and always emptyed the gas out after use.. never has a leak problem with it. I plan on doing the same with my WA mags.

I believe it basicly comes down to this.. you decided if you wanna keep gas in it or not both work the same to me.

Unless someone can sciencetifically discribe how keeping gas in the mag helps and how leaving it empty is bad or other way around.
__________________
Quote:
Originally Posted by Lisa
Forums are a repository for info, not spoon feeding your sorry ass.
HGI is offline   Reply With Quote
Old November 11th, 2005, 21:50   #14
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
my mosquito molds moscart came with enough gas in it that it wnet BANG when i pushed in the pin for the first time. scared the shit out of me, but my 4 c.a. ones did not have anything in them. a small amount of gas wouldn't hurt anything, but if you put some in as a test annd periodically checked them to see if the gas stayed in, it would be a good indication if any mags may have future seal/valve problems if they lost their gas. if you're storing for long periods it would be a good idea to put some silicone oil in the mags to keep the seals moist. the gas pressure will force the oil to move towards a leak and thru and this (over time) is also a tell-tale sign of seal failure.
mcguyver is offline   Reply With Quote
Old November 11th, 2005, 22:24   #15
-Trooper-
a.k.a. Egria
 
-Trooper-'s Avatar
 
Join Date: Jul 2005
Location: Vancouver
A few months ago I got my Deagle repaired. When i got it back a week and a half later, the mag was leaking like crazy. I put gas in and it just comes out. I had to take it apart and put silicone oil on everything.
__________________


PURVEYOR OF FINE PARACORD PRODUCTS

www.beaconconceptsco.com

Click Here For ASC Thread

Team GHOSTS - G86
-Trooper- is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 18:33.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.