Tokyo Marui - Boys

mugenman · August 6th, 2015, 02:59

I used to play a lot of airsoft and now my boys are getting a bit older (oldest is 12) and are keen on getting into airsoft. Full sized AEGs are still a bit big and heavy. Does any pone know if the TM boys line is still available anywhere in Canada or if they can be imported without major issues?

Ricochet · August 6th, 2015, 12:58

G&G makes $200 - $300 light weight rifles and they're sold in Canada, in multiple places. TM will be more expensive and harder to get.

Styrak · August 6th, 2015, 13:08

Yup the G&G CM16 line are much lighter gun, would probably be appropriate.

mugenman · August 6th, 2015, 14:51

only problem, these appear to be a full sized aeg? They are still of the age where they can't get the buttstock to rest properly on their shoulder while holding the gun properly... thanks for the info though!

BioRage · August 6th, 2015, 14:53

Most low-tier G&G are made out of plastic, so it's not to bad.

If you really want small rifles for your kids, get a SMG or PDW.

(P90, MP5K, MP5, UMP, etc.)

You can also find some shorter m4's around too.

redzaku · August 6th, 2015, 15:17

my vote would be on the G&G CM16 with a 10.5 inch barrel, magazines are easily found and shared between other players, unless they run a GBBR...
keep the buttstock at setting 1 and they should not have any problems shouldering it
however you need to head over to brick and mortar shop, and have them hold it and feel it before making such a decision

BioRage · August 6th, 2015, 15:29

Quote:

Originally Posted by redzaku

my vote would be on the G&G CM16 with a 10.5 inch barrel, magazines are easily found and shared between other players, unless they run a GBBR...
keep the buttstock at setting 1 and they should not have any problems shouldering it
however you need to head over to brick and mortar shop, and have them hold it and feel it before making such a decision

10.5 is probably to long for them, they are probably half everyone's size lol.

maybe a 7"<

M4 ES Baby? Think Mach1 has them.

Stockless

Strelok · August 6th, 2015, 15:31

The stocks are fully adjustable on the CM16, If you need something very low profile, you can find an older style M4/CAR-15 style buttstock as its much smaller compared to modern stocks.

My Nephew liked shooting my XM177e2 GBBR and he had no problem shouldering it with the stock collapsed.

Ricochet · August 6th, 2015, 15:47

My 2 year old can almost shoulder a full battery M4 skeleton stock. I agree though that you should take them to a shop to at least hold guns. Plus one for SMGs as well.

Wilkie · August 7th, 2015, 01:03

I can not fathom someone being too small to shoulder a 10" carbine with a collapsible stock, expecially at 12. M4s aren't big rifles to begin with, shave off 4" and collapse the stock down to the length of the stock foot, about 6" and you have a rifle anyone can shoulder.

I've literally seen dwarfs shoulder SBR ARs.

_Whiskey_ · August 7th, 2015, 10:21

Quote:

Originally Posted by BioRage

10.5 is probably to long for them, they are probably half everyone's size lol.

maybe a 7"<

M4 ES Baby? Think Mach1 has them.

Stockless

1+ On these Plus I don't think M4's Get any smaller or lighter. Although I believe ICS Makes a model close to that with a polymer body That Would be maybe abit lighter, ChecK M1 as BIORAGE said

Kokanee · August 7th, 2015, 11:03

No one has mentioned it so far, so I will. Maybe your children are too young for the sport? This is a sport for adults, are you going to watch them 24/7 to make sure they don't do anything irresponsible with the firearms you are going to buy for them?

Hectic · August 7th, 2015, 11:34

Quote:

Originally Posted by Kokanee

No one has mentioned it so far, so I will. Maybe your children are too young for the sport? This is a sport for adults, are you going to watch them 24/7 to make sure they don't do anything irresponsible with the firearms you are going to buy for them?

Definitely not too young to be learning gun safety, the honour among players (calling hits etc..) and how to shoot in a straight line lol.
at our field we welcome veteran players to bring out the little ones teach em the ropes n such. By the time they can play anywhere they will be great players and a welcome part of the community.

ThunderCactus · August 7th, 2015, 11:49

Couple neat small guns that fit tiny hands:
scorpion
PDR-C (super tiny grip on it)
P90 (has a fat grip, but short gun)
MP5
MP7
MP9

The problem with the BOYS mechbox is it's entirely proprietary, and therefore un-fixable, un-upgradeable, and probably only shoots 160-200fps

BioRage · August 7th, 2015, 12:04

Quote:

Originally Posted by ThunderCactus

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 6th, 2015, 02:59	#1
mugenman Trader rating Join Date: Jan 2002	Tokyo Marui - Boys I used to play a lot of airsoft and now my boys are getting a bit older (oldest is 12) and are keen on getting into airsoft. Full sized AEGs are still a bit big and heavy. Does any pone know if the TM boys line is still available anywhere in Canada or if they can be imported without major issues?

August 6th, 2015, 12:58	#2
Ricochet How much sand CAN you fit in your vagina!? Trader rating Join Date: Feb 2008 Location: North Delta, BC (Greater Vancouver)	G&G makes $200 - $300 light weight rifles and they're sold in Canada, in multiple places. TM will be more expensive and harder to get. __________________ I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...

August 6th, 2015, 13:08	#3
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Yup the G&G CM16 line are much lighter gun, would probably be appropriate. __________________ Airsoft Sales and Repair/Upgrade Services

August 6th, 2015, 14:51	#4
mugenman Trader rating Join Date: Jan 2002	only problem, these appear to be a full sized aeg? They are still of the age where they can't get the buttstock to rest properly on their shoulder while holding the gun properly... thanks for the info though!

August 6th, 2015, 14:53	#5
BioRage Trader rating Join Date: Nov 2008 Location: Toronto	Most low-tier G&G are made out of plastic, so it's not to bad. If you really want small rifles for your kids, get a SMG or PDW. (P90, MP5K, MP5, UMP, etc.) You can also find some shorter m4's around too.

August 6th, 2015, 15:17	#6
redzaku Trader rating Join Date: Jul 2010 Location: Edmonton	my vote would be on the G&G CM16 with a 10.5 inch barrel, magazines are easily found and shared between other players, unless they run a GBBR... keep the buttstock at setting 1 and they should not have any problems shouldering it however you need to head over to brick and mortar shop, and have them hold it and feel it before making such a decision __________________ Love and Tolerance Coffee, what purpose does these serve? А ну, чики-брики и в дамки! За Родину! BRRRRRT!

August 6th, 2015, 15:31	#8
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	The stocks are fully adjustable on the CM16, If you need something very low profile, you can find an older style M4/CAR-15 style buttstock as its much smaller compared to modern stocks. My Nephew liked shooting my XM177e2 GBBR and he had no problem shouldering it with the stock collapsed.

August 6th, 2015, 15:47	#9
Ricochet How much sand CAN you fit in your vagina!? Trader rating Join Date: Feb 2008 Location: North Delta, BC (Greater Vancouver)	My 2 year old can almost shoulder a full battery M4 skeleton stock. I agree though that you should take them to a shop to at least hold guns. Plus one for SMGs as well. __________________ I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...

August 7th, 2015, 01:03	#10
Wilkie Trader rating Join Date: Apr 2013 Location: Brandon, Mb	I can not fathom someone being too small to shoulder a 10" carbine with a collapsible stock, expecially at 12. M4s aren't big rifles to begin with, shave off 4" and collapse the stock down to the length of the stock foot, about 6" and you have a rifle anyone can shoulder. I've literally seen dwarfs shoulder SBR ARs.

August 7th, 2015, 11:03	#12
Kokanee Ministry of Peace Trader rating Join Date: Mar 2002	No one has mentioned it so far, so I will. Maybe your children are too young for the sport? This is a sport for adults, are you going to watch them 24/7 to make sure they don't do anything irresponsible with the firearms you are going to buy for them?

August 7th, 2015, 11:49	#14
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Couple neat small guns that fit tiny hands: scorpion PDR-C (super tiny grip on it) P90 (has a fat grip, but short gun) MP5 MP7 MP9 The problem with the BOYS mechbox is it's entirely proprietary, and therefore un-fixable, un-upgradeable, and probably only shoots 160-200fps

Tokyo Marui - Boys

Airsoft Guns Discussion