Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Accessories Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Lipo bag alternatives

:

Accessories Discussion

Reply
 
Thread Tools
Old September 17th, 2014, 20:37   #1
TopGunnerz
 
Join Date: Mar 2012
Location: North York / Scarborough
Lipo bag alternatives

Hi, I've recently switched over to 11.1v Lipo batteries, and was wondering if there is a cheap alternative to buying a Lipo bag or getting an ammo can. Any ideas would be appreciated, thanks!
TopGunnerz is offline   Reply With Quote
Old September 17th, 2014, 20:51   #2
Kingsix
 
Kingsix's Avatar
 
Join Date: Apr 2008
Location: Peoples Republic of Toronto
ceramic floor tile
__________________
Kingsix is offline   Reply With Quote
Old September 17th, 2014, 21:13   #3
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
concrete floor...

make sure there's nothing in the area of where you're charging... around or above.

a metal toolbox on ceramic tile will also work.

A lipo bag will not stop a lipo fire, nor will the concrete or ceramic...

it will hopefully contain it long enough for you to do something about it or further prevent the spread of the fire.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

Last edited by lurkingknight; September 17th, 2014 at 21:17..
lurkingknight is offline   Reply With Quote
Old September 17th, 2014, 21:17   #4
ccyg8774
 
ccyg8774's Avatar
 
Join Date: Jun 2012
Location: Brampton, ON
Metal ammo can (from army surplus store)
__________________
ccyg8774 is offline   Reply With Quote
Old September 17th, 2014, 23:30   #5
TopGunnerz
 
Join Date: Mar 2012
Location: North York / Scarborough
I'm looking for something I can transport, and an ammo can is too bulky, and I'm wondering if there is a way to construct my own bag so I can transport them without one bursting into flames and the rest of my gear catching fire, if one were to get punctured during transport
TopGunnerz is offline   Reply With Quote
Old September 18th, 2014, 00:13   #6
DrDoUm
 
DrDoUm's Avatar
 
Join Date: Feb 2007
Is it because you are afraid of accidentally striking hit several times with an hammer while transporting it?

Lipo Battery fire. - YouTube



Now, on a more serious note, I guess you could find a small metal can in a camping/hunting store that would protect your battery. Or maybe an empty coffee can would do.

Personally I've been carrying my Lipos in a regular bag for years without issue.

EDIT: Actualy, the only issue I had was the small charging wire ripping at its base making it impossible to charge my battery, so I had to buy a new one.
__________________

Last edited by DrDoUm; September 18th, 2014 at 00:15..
DrDoUm is offline   Reply With Quote
Old September 18th, 2014, 00:28   #7
EagleDriver
 
Join Date: Feb 2009
Location: Baltimore, MD USA
Lipo bags are really inexpensive - less than $3. I cannot think of anything else (off of the top of my head) that would be cheaper than that.

http://www.hobbyking.com/hobbyking/s...UMBO_Sack.html
EagleDriver is offline   Reply With Quote
Old September 18th, 2014, 01:12   #8
Sequential
 
Sequential's Avatar
 
Join Date: Sep 2007
Location: HKG.YYZ.NRT
I think a small pelican case for transporting lipo's would be good.
__________________
Sequential is offline   Reply With Quote
Old September 18th, 2014, 01:19   #9
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
a bag is not meant to transport them... they're for charging discharging the batteries.


I use something like this:

http://www.tacklewarehouse.com/Plano...age-P3600.html

go to walmart. they're 5 bucks. leave the whole box in the car, don't carry batteries with you on your kit.

A guy here in ottawa tripped and fell on a branch, it punctured the spare lipo that he was carrying in a pouch... it went up in flames while strapped to him.

No injury, but good enough reason not to carry a battery with you on your kit... at least without a hard case/box.

If you must carry one on your kit in a utility pouch, find an appropriate hard case to put it in that will at least offer some protection.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old September 18th, 2014, 01:31   #10
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
I haven't actually used a lipo bag since the 2nd time I charged a lipo.
They charge right next to me, so I know right away if somethings going wrong.

They also only fail during charging if something bad happened to them prior to charging, so you've got really good safety windows on them.
ThunderCactus is offline   Reply With Quote
Old September 18th, 2014, 10:38   #11
targetGspot
 
targetGspot's Avatar
 
Join Date: May 2009
Location: Manitoba
I've never used a bag for charging. Mine barely warm up during charging, less than any other battery I've used in the past actually. I charge ANY battery away from anything that could catch fire and always monitor them throughout charging. I use a Pelican case, (I already had a few) for transport. Not because I'm worried about a fire but it just keeps everything together. A bag won't help against them getting banged around, crushed or punctured, any hard case should suffice. I recommend plastic just in case an end manages to come off, (shouldn't) but that way less chance of it shorting out.
__________________
targetGspot is offline   Reply With Quote
Old September 18th, 2014, 10:57   #12
BogardusFoul
 
BogardusFoul's Avatar
 
Join Date: Mar 2012
Location: Guelph, ON
Make sure you have the proper lipo handling equipment.
__________________
Stabface Custom Embroidery

Name Tapes
Team Patches
Hats
Custom Embroidery
www.stabface.ca
BogardusFoul is offline   Reply With Quote
Old September 18th, 2014, 11:02   #13
Deadpool
 
Deadpool's Avatar
 
Join Date: Jul 2008
Location: Trois-Rivières
Ceramic flower pots are a good alternative.
__________________

Vérificateur d'age Mauricie
Quote:
Originally Posted by Strelok View Post
So you're saying we cannot engage in a hobby once we are older?

Children these days.
Deadpool is offline   Reply With Quote
Old September 18th, 2014, 11:16   #14
TopGunnerz
 
Join Date: Mar 2012
Location: North York / Scarborough
Alright thanks, I guess a small hard case would work, yes that whole story with a Lipo going up in flames is what I was trying to avoid, thanks lurkingknight
TopGunnerz is offline   Reply With Quote
Old September 18th, 2014, 11:44   #15
waylander
 
Join Date: Aug 2014
Location: Edmonton, Alberta
Just use care and common sense. I've been using lipos for years in RC Heli's and cars, I only use a lipo bag while charging, if it's going to go it's going to go, you do NOT have time to do anything about it once the reaction starts so definitely use something or put it on non flammable ground and away from flammables while charging.

During transport is the least likely time for a lipo to spontaneously catch fire, as long as you keep them protected (i.e. don't put a screw driver in the same container) you're fine. The vast majority of fires are because of over charging (either too fast or too much) and the left over small parts are from damage and of course on purpose. I've seen a 22.2v 3000mah lipo survive a heli crash from 50' up. Punctured, torn, ripped apart but it didn't catch on fire.

For transport I use everything from a Plano tackle box (for batteries, tools and spare parts) to lunch box's to tool boxes... etc. I've even used those cheap ziploc containers meant for lunches...

Last edited by waylander; September 18th, 2014 at 11:47..
waylander is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Accessories Discussion

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 19:31.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.