Need help thinking of a new project (crazier the better)

[Vivek92]

I'm approaching the end of my first year of serious airsofting and its been a blast, after spending the first four months playing around with stock guns I got heavily into teching and learning everything I could about AEGs and GBBRs and finished off two project guns and now I'm stuck in a place where I REALLY want another gun but I'm never satisfied with stock anything so I'm looking for an interesting idea for my next project.

The two long term projects I've finished are (just to give you an idea of what I've already done)

WE Tech PDW DMR Mod.
I took a stock PDW fiddled around with the trigger assembly till I turned auto into semi (so its semi-locked). I installed a 550mm 6.03 tightbore extended the barrel fabricated custom supports in the upper receiver to keep the outer/inner barrel stable. I dropped in a RA-Tech PDW bolt (entire bolt with NPAS installed) and this thing is a nail driver. Max FPS is 448 but maintains about a 440 with sustained semi auto.

M4 CQBR

This began life as an Ares M4 CQC until the upper receiver cracked and I replaced it with a metal body. At that point I told myself I may as well just do a full custom build. The only stock parts left are the tiny outer barrel and crane stock.

The gun contains:

ZCI QD V2 gearbox
8mm bearings
Modify ported cylinder (200-300mm)
Madbull full metal tooth piston
Modify aluminum piston head
Modify 16.32:1 gears
Modify AV latch
Modify Tappet
SHS metal nozzle
16 AWG low resistance wiring
MERF 3.2 MOSFET
Modify 110 Spring
Pro-Win hopup
Modify Flat hop bucking and rubber
EDIT: Tienly GT45000 Motor

This nets me 345 FPS at 30~31 RPS which is exactly what I wanted for CQC (MERF bust functions properly up to 31.25 RPS)

Now I just don't know WHAT I want to do next. I was thinking a pure ROF MP5 (either a short stroked 120 spring or straight up DSG 90 spring) but at the end of the day how useful would that be...

I just don't know someone inspire me

[pestobanana]

Make it do this:

[Vivek92]

O_o o_O impressive... may I inquire as to what is producing such magnificent results?

[pestobanana]

Basic setup:
RiotSC 10:1 SS-3 from release side
Lonex Red Piston SS-3 and skeletonized
Lonex M100
G&P 8mm Bearings on bevel, Modify 8mm Ceramic bearings on sector and top of spur, VFC Steel Bushing under spur
Tienly F5000 GT45000 Motor
Stock wiring (no MOSFET because it killed my PicoSSR2 lol)
11.1V 3300 mAh 25C Li-Po

Going to install my Chimera next week when I get home, hopefully I'll break 60 RPS.

Originally Posted by Vivek92

O_o o_O impressive... may I inquire as to what is producing such magnificent results?

[Vivek92]

That is quite nice. I LOVE that motor (edited it into my post). My problem was I recently cooked a battery with how much power it was drawing (to be fair it was cheap and weak 11.1 LIPO).

[pestobanana]

I used to love Lonex motors. Now Tienly motors make Lonex feel like shit to me. Too bad since I still have 4 of them -____-

[Stealth]

Originally Posted by Vivek92

Now I just don't know WHAT I want to do next. I was thinking a pure ROF MP5 (either a short stroked 120 spring or straight up DSG 90 spring) but at the end of the day how useful would that be...

Not very useful. Extremely-high ROF guns are more of a dick-waving competition, really. That's not to say it's not a worthwhile technical challenge, but practicality is basically zero.

It's almost as useless as this, although I can see some purpose to the latter.

[MADDOG]

I would be surprised if that did not take off the front of the mechbox shell, is that real or just a glitch in the xcortech?

[FirestormX]

Haha, wow. If that's firing on a .2, that's over 500 FPS, and over 5.7 joules (I think it's a little over 15 joules). I think that thing falls under the firearm act.
785 FPS is the magic (rounded) number, before hitting 5.7 joules.

[pestobanana]

I'd have to agree. High RoF guns are just "because I can" builds. Last time I gamed this gun I stuck to semi the whole day.

Is that HS5's gun?

Originally Posted by Stealth

Not very useful. Extremely-high ROF guns are more of a dick-waving competition, really. That's not to say it's not a worthwhile technical challenge, but practicality is basically zero.

It's almost as useless as this, although I can see some purpose to the latter.

[Thenooblord]

this is firing .3s

[Vivek92]

Any other ideas?

[pestobanana]

make an airsoft gun that actually shoots straight

[Wrath144]

Dsg ptw?

[L473ncy]

I've got an idea. Make an airsoft gun where you can get a Toonie sized grouping of 5 rounds at say 10 metres on single shot. You've got to make the system as consistent as possible and tune everything just right.

Not sure if it's realistic but try it out anyways.