Looking for Gun doc for KSC G19

[DanKicker]

Hey there,

I'm looking for a gun doc, I live near Montreal.

Issue with my KSC G19. misfeeding.

After initial problem, the gun was open and I saw that part 87 was broke. It was changed. Upon reassemble the problem was still there. Maybe the part wasn't properly fixed.

Still, I brought it to "ninja_en_short", even him couldn't solve the problem.

What happens is that half the time the 1st bb goes out and the mag throws out all it's propane.

The other half of the time and have to manually cock the gun to continue shooting.

It wasn't bough brand new, and the last time it was fielded it worked. Something happent during transport, and I can't tell what it is.

Any help would be appreciated!

Diagram:
http://www.freewebs.com/armourpierci...s/ksc-g19s.jpg

[shootersaber]

Dose it have any damage on the hammer?

[MaybeStopCalling]

I had that problem with a hopup rubber that improperly fit the barrel and nozzle, it'd short stroke and jam. Got a new KSC rubber and I was back in business.

EDIT: This was also in addition to the pin holding the valve in the nozzle drifting out and binding against the nozzle housing.

[Kos-Mos]

Check the rocket valve spring for bend/deformation. I recall KSCs glock have enough play to let the spring bind between the valve and nozzle body.