|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 15th, 2012, 15:58 | #1 |
ACM M500 Shotgun spread
EDIT: Nevermind. Figured it out
Does this thing have a hopup? I fired a few test shots and the BBs seem to spread like crazy after about 20 feet. Basically in different directions. Other videos i've seen tend to have a close group of 5 BBs that gradually becomes larger. Is there something I can adjust to lessen the spread at the beginning? Advice?
__________________
H&K G36c (KWA) / Glock 18c (TM) / Kimber LAPD SWAT Custom (TM) / Mossberg M500 (ACM) Last edited by ap27; May 15th, 2012 at 17:22.. |
|
May 15th, 2012, 18:17 | #2 | |
according to the reviews I've read there is no hop up on that shotty
I have no idea about the reducing the spread on an airsoft shotty only perhaps modifying the barrel so it fires more of a horizontal spread. I know you can add a "choke" to a real shotty to reduce spread but not sure how to go about doing this. I'd be interested to hear ShelledPants's take on this. 20 feet doesn't sound bad though. Shotty's are good to about 150feet so an airsoft shotty being max effective at say 60feet would sound about right. Maybe even less. If they're spreading by 20 feet that doesn't sound too bad. I'd have to see it in person to really say for sure. that's my 0.02$
__________________
Quote:
|
||
May 15th, 2012, 18:57 | #3 |
NAAZ's #1 fan!
|
The only way to alter the spead is change the weight of bb you are using.
-alex |
May 15th, 2012, 19:27 | #4 | |
Quote:
|
||
May 15th, 2012, 21:36 | #5 |
aka coachster
|
Didn't you handle mine one night at TTAC?
Anyway, the only way I modify the spread is with bb weight as mentioned. Lighter BB's will cause a wider pattern at short range and is less likely to stay on the targets center mass and flight is more erratic. Heavy BB's with get you a tighter pattern at longer range but you must account for the additional weight which will decrease overall fps and ultimately distance. I consider usable weights with a 5 BB per shot acm m500 as the following: .12's - wide pattern at shorter range .2's - narrower pattern and moderate range .25's - tight pattern at shorter range YMMV! I don't have specifics as I don't have the space to test but this is from testing and skirmishing at TTAC back in April when I finally modified it to hold gas. (holding a full charge for over a month now) I have also tried .28's but the drop off in fps is significantly diminished since there is no hopup. My best recommendation is to create a mix that is suitable for the conditions you play in. Something like 1:2:1 .12's:.2's:.25's for a balanced mix. Personally, I just use all .2's or all .25's and just deal with it. |
May 16th, 2012, 11:39 | #6 | |
dammit! I was gonna say say heavier bbs...
The only right thing to do now is change my original post and then accuse people of copying my idea. ... brb
__________________
Quote:
|
||
|
Bookmarks |
|
|