Npas Kit For we tech

[mr.ying]

Does anyone know if i can find Npas kit for we g39k? My gun shoots too hot for indoor cqb. Any ideas?

[Basic-Wedge]

Take a look through this thread here: http://www.airsoftcanada.com/showthread.php?t=114841 You'll find plenty of useful information about WE's G39.

[mr.ying]

Originally Posted by Basic-Wedge

Take a look through this thread here: http://www.airsoftcanada.com/showthread.php?t=114841 You'll find plenty of useful information about WE's G39.

Thanks buddy. I read through the whole thread. As someone mention the Npas kit is the same fit with the pdw, with a bit of modification. No one really mention the details of how to modify the parts to fit, or how to use the npas properly? Just a bit confused.

[XZIVR]

I like being able to read.

http://www.airsoftparts.ca/store2/in...oducts_id=2047

"For WE G39C please follow directions for M14."

[Basic-Wedge]

Once you have the NPAS valve for WE open bolt rifles (costs about $15), you simply disassemble the bolt, remove the valve-like device that ships with the rifle, and replace it with the NPAS. The NPAS simply drops right into place - there is no modification needed. Once you have it in place, you use the supplied tool to adjust the valve, until you get the desired velocity.

It's quite a bit easier to understand when you have everything in your hands.

I don't have a link for you, but there was a two part video I watched on YouTube that demonstrated the complete disassembly of a WE G39. Search for that, and the job of disassembling the bolt will be much easier.

[mr.ying]

Originally Posted by Basic-Wedge

Once you have the NPAS valve for WE open bolt rifles (costs about $15), you simply disassemble the bolt, remove the valve-like device that ships with the rifle, and replace it with the NPAS. The NPAS simply drops right into place - there is no modification needed. Once you have it in place, you use the supplied tool to adjust the valve, until you get the desired velocity.

It's quite a bit easier to understand when you have everything in your hands.

I don't have a link for you, but there was a two part video I watched on YouTube that demonstrated the complete disassembly of a WE G39. Search for that, and the job of disassembling the bolt will be much easier.

Alright thanks for both of your input.

[Basic-Wedge]

I found the video:

G39C Bolt Carrier Disassembly and RA Tech NPAS - YouTube

Just give that a look. It tells you everything.