C7-C8

Cpt- Lovegrove · October 25th, 2011, 06:21

do they make a C7 or C8 for airsoft? i'v been looking, but cant find anything other then a c7 mag

R.I.T.Z · October 25th, 2011, 06:28

Yup, sorta.. Toronto airsoft has one from G&P

SONNY BLUE · October 25th, 2011, 07:16

http://torontoairsoft.com/product.php?id_product=1310

jakster · October 25th, 2011, 08:35

It takes alot of time and sourcing of parts
I built mine based on a JG M16, the only original part left is the base plate for the motor
- Used a C8 with Canadian markings as the base
- Knight Arms Butt full stock
- Tight bore barrel
- Knight Arms heavy outer barrel
- Real steel forestock with heat shield and gas tube
- Real steal front site
- Knight arms (I think) delta ring
- Knights Arms pistol grip
- Real steel Elcan
About 3 years of work and 3 gun docs before I got it to where I wanted it
Good luck and let me know if you need any referance photos
Jakster

ragnagna · October 25th, 2011, 08:54

If you're looking for a C8 I suggest you to buy the one on Toronto Airsoft. The most important part is already on the gun (the body). You only have to change the barrel, the handguard and the stock if you really want a C8.

Crunchmeister · October 25th, 2011, 09:19

Those are nice guns. But note that they have the LE trademarks on them and not the CF version. If you're ok with that, then go for it.

Your best bet for authenticity (if you want the CF version) is to build it yourself. There's little in terms of the defining features of the Canadian guns that set them apart in look from the American M-series in these pre-built guns. The receivers with the authentic markings are hard to locate, but pop up in the classified occasionally. You just have to be quick and snatch them up as they tend to disappear quickly.

I have one of each. Both have the receivers, and are "mostly" authentic. A few externals details are off, but nothing major. My C7A2 is as close as it gets. It's basically the same as an M16 only with a proper C7A2 marked Guarder receiver, and TRIAD mount. I have a G&P crane stock on it, which is the variation on the real steel, and my furniture is black rather than green. I also use an ELCAN replica. Other than the colour and stock, it's as authentic as it gets.

My C8A3 is a full custom build. I got a DBoys C8 receiver (not C8A3 unfortunately)as the base. Everything else is custom built. It also sports a G&P crane stock, and has green furniture, TRIAD and real steel slim handguards. The only thing it needs for completion to 100% authenticity is the heavy barrel. I never got around to getting one. I'll switch between an ELCAN and a real steel EOTech 552 on this gun.

Curo · October 25th, 2011, 09:56

The TRIAD mount is a fairly easy find I think One Shot has some.

The Chad · October 25th, 2011, 10:23

No they don't. they have a cadex tri rail. RIS is better anyway. Put up a wanted ad for the TRI-AD, they will come out of the woodwork.

There were a few C8 bodies brought in but they got snatched up real quick. My advice is not to build on the WA platform, I have been sitting on all the parts for my build for about 6 months now waiting for a body.

DarkAngel · October 25th, 2011, 11:01

Quote:

Originally Posted by The Chad

I have been sitting on all the parts for my build for about 6 months now waiting for a body.

Funny, I had no problems aquiring WA Series Bodies. Custom G&P or Prime ones that I hand picked.

6 months = you arnt even trying.

I have 3 custom builds sitting on my workbench as a matter of fact.
I have a spare lower sitting around here somewhere.

What you need to build it (WA)

Engraved Receiver (Blank receiver with custom engravings is easiest)
C8 Slim Handguards (I ended up using a Lighted Foregrip and flipped my triad backwards)
L11A1 Heavy Barrel (Pro Arms Makes em for WA)
C8 Collapsable Stock (G&P)
Stock Pad (Guarder)
Elcan (I find Trigger Happy makes the best clone, or you can go with a real one)
C8 CoatHanger Charging Handle (I Modified a real one)
Grip (I ended up swapping to a MIAD to hold a few Extra CR123s)
Ambidexterious Mag Catch (G&P)
TRIAD (Real)

The Chad · October 25th, 2011, 11:06

That's awesome. I had no problems getting laid last night but has nothing to do with my build. There are no retailers in country selling WA GBBR bodies, end of story.

redzaku · October 25th, 2011, 14:41

in technical terms; KJ works m4 carbine GBBR is the C8?

ThunderCactus · October 25th, 2011, 15:16

The KJ M4 is an M4A1 that uses thermold mags, it's not a C8

redzaku · October 25th, 2011, 15:25

Quote:

Originally Posted by ThunderCactus

The KJ M4 is an M4A1 that uses thermold mags, it's not a C8

oh, good to know

Gato · October 25th, 2011, 16:18

Quote:

Originally Posted by ThunderCactus

The KJ M4 is an M4A1 that uses thermold mags, it's not a C8

That is correct, it's pretty much ALL wrong. Besides, we don't use Thermold mags anymore.
Also, Dark Angel, we've been overthis, yours don't count as C7's or C8s, you went too far with the "Artistic" license :P

EDIT: A picture of my baby, Lysiane

She started life as a WE M4A1. She now consists of:
Real buttstock and buffer tube (Old C8 stock, metal not plastic)
Real Pistol grip
Real handguards
Real front grip and rail
Real Diemaco Back up Iron Sight
Real Triad marked with Diemaco D
Real Elcan with trouble shooting card and cover
Real charging handl;e (Both, the C7 and C7A2 handles)
Real C9 Grip modified for rifle use
Real sling (Easy as shit to get)
CF Armourer's wrench thing.

All I need now is a blank lower

MaybeStopCalling · October 25th, 2011, 16:22

EoTechs (552 or 553, can someone clear that up?) are also another option if you don't want to use an Elcan.

If you plan on engraving trademarks:

*LEAF ICON HERE*
CANADIAN
FORCES
CANADIENNES
C7A2
5.56 mm
XXAA#####

Replace C7A2 with C7, C7A1, C7A2, C8, C8A1, C8A2, C8FTHB, C8FTHBA3 or C8A3 depending on what you're trying to Replicate. The C8FTHBA3 was I believe a bunch of FTHB receivers used for the first batch of C8A3s, but I could be wrong. Updated receivers (For example, a C7 that was rebuilt into the C7A2) will have the new designation engraved into the body next to the original and thus the designation will look "Off Centre"

XX represents the last two digits of year of manufacture, AA is the weapon code, and the # represents a 5 digit ID. I don't remember weapon codes off the top of my head. 88AA01234 would denote a lower receiver made in 1988, AA denotes an original C7 lower receiver, and 01234 is unique to that receiver.

Again, I could be wrong and I probably have made a mistake, but I'm sure someone can clarify.

PS: The TRIAD is a piece of [Bleep]

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 25th, 2011, 06:21	#1
Cpt- Lovegrove Trader rating Join Date: Oct 2011 Location: kingston ontario canada	C7-C8 do they make a C7 or C8 for airsoft? i'v been looking, but cant find anything other then a c7 mag

October 25th, 2011, 07:16	#3
SONNY BLUE Trader rating Join Date: Jan 2010 Location: Mississauga/Etobicoke	http://torontoairsoft.com/product.php?id_product=1310 __________________ TEAM MAGDALO "A superior man is modest in his speech, but exceeds in his actions" - C ‎"What counts is not necessarily the size of the dog in the fight – it’s the size of the fight in the dog" - DE

October 25th, 2011, 09:19	#6
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Those are nice guns. But note that they have the LE trademarks on them and not the CF version. If you're ok with that, then go for it. Your best bet for authenticity (if you want the CF version) is to build it yourself. There's little in terms of the defining features of the Canadian guns that set them apart in look from the American M-series in these pre-built guns. The receivers with the authentic markings are hard to locate, but pop up in the classified occasionally. You just have to be quick and snatch them up as they tend to disappear quickly. I have one of each. Both have the receivers, and are "mostly" authentic. A few externals details are off, but nothing major. My C7A2 is as close as it gets. It's basically the same as an M16 only with a proper C7A2 marked Guarder receiver, and TRIAD mount. I have a G&P crane stock on it, which is the variation on the real steel, and my furniture is black rather than green. I also use an ELCAN replica. Other than the colour and stock, it's as authentic as it gets. My C8A3 is a full custom build. I got a DBoys C8 receiver (not C8A3 unfortunately)as the base. Everything else is custom built. It also sports a G&P crane stock, and has green furniture, TRIAD and real steel slim handguards. The only thing it needs for completion to 100% authenticity is the heavy barrel. I never got around to getting one. I'll switch between an ELCAN and a real steel EOTech 552 on this gun. __________________

October 25th, 2011, 06:28	#2
R.I.T.Z Crackers Trader rating Join Date: Mar 2009 Location: The Shwa	Yup, sorta.. Toronto airsoft has one from G&P

October 25th, 2011, 08:35	#4
jakster Trader rating Join Date: Jan 2003 Location: Montreal area	It takes alot of time and sourcing of parts I built mine based on a JG M16, the only original part left is the base plate for the motor - Used a C8 with Canadian markings as the base - Knight Arms Butt full stock - Tight bore barrel - Knight Arms heavy outer barrel - Real steel forestock with heat shield and gas tube - Real steal front site - Knight arms (I think) delta ring - Knights Arms pistol grip - Real steel Elcan About 3 years of work and 3 gun docs before I got it to where I wanted it Good luck and let me know if you need any referance photos Jakster

October 25th, 2011, 08:54	#5
ragnagna Trader rating Join Date: Jun 2009 Location: Laval, Quebec, Canada	If you're looking for a C8 I suggest you to buy the one on Toronto Airsoft. The most important part is already on the gun (the body). You only have to change the barrel, the handguard and the stock if you really want a C8.

October 25th, 2011, 10:23	#8
The Chad formerly LoveMyStubby Trader rating Join Date: Dec 2008 Location: SW ON	No they don't. they have a cadex tri rail. RIS is better anyway. Put up a wanted ad for the TRI-AD, they will come out of the woodwork. There were a few C8 bodies brought in but they got snatched up real quick. My advice is not to build on the WA platform, I have been sitting on all the parts for my build for about 6 months now waiting for a body. Last edited by The Chad; October 25th, 2011 at 10:25..

October 25th, 2011, 11:06	#10
The Chad formerly LoveMyStubby Trader rating Join Date: Dec 2008 Location: SW ON	That's awesome. I had no problems getting laid last night but has nothing to do with my build. There are no retailers in country selling WA GBBR bodies, end of story.

October 25th, 2011, 14:41	#11
redzaku Trader rating Join Date: Jul 2010 Location: Edmonton	in technical terms; KJ works m4 carbine GBBR is the C8? __________________ Love and Tolerance Coffee, what purpose does these serve? А ну, чики-брики и в дамки! За Родину! BRRRRRT!

October 25th, 2011, 15:16	#12
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	The KJ M4 is an M4A1 that uses thermold mags, it's not a C8

October 25th, 2011, 16:22	#15
MaybeStopCalling Green Synergy Trader rating Join Date: May 2009	EoTechs (552 or 553, can someone clear that up?) are also another option if you don't want to use an Elcan. If you plan on engraving trademarks: LEAF ICON HERE CANADIAN FORCES CANADIENNES C7A2 5.56 mm XXAA##### Replace C7A2 with C7, C7A1, C7A2, C8, C8A1, C8A2, C8FTHB, C8FTHBA3 or C8A3 depending on what you're trying to Replicate. The C8FTHBA3 was I believe a bunch of FTHB receivers used for the first batch of C8A3s, but I could be wrong. Updated receivers (For example, a C7 that was rebuilt into the C7A2) will have the new designation engraved into the body next to the original and thus the designation will look "Off Centre" XX represents the last two digits of year of manufacture, AA is the weapon code, and the # represents a 5 digit ID. I don't remember weapon codes off the top of my head. 88AA01234 would denote a lower receiver made in 1988, AA denotes an original C7 lower receiver, and 01234 is unique to that receiver. Again, I could be wrong and I probably have made a mistake, but I'm sure someone can clarify. PS: The TRIAD is a piece of [Bleep] Last edited by MaybeStopCalling; October 25th, 2011 at 16:27..

C7-C8

Airsoft Guns Discussion