|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 2nd, 2011, 20:08
|
#1 |
|
Need help with an AEG v2 gearbox.
I have a g&g m4 with a v2 gearbox. I am having some trouble with it. What happens is i fire the gun a few times then it seems like something gets caught and wont fire. The spring compress and when i pull the trigger i hear a click click and nothing happens. I have to take the gun apart, re assemble it and then it goes again. The battery is fine i tried it with several batteries and the motor is perfect too. I need your help
|
|
|
|
|
September 6th, 2011, 12:53
|
#2 |
|
Next time you disassemble check the parts for any damage, teeth on gears/piston, wear on cylinder check everything.. the piston could be getting cought, either slipping off the track or having the track blocked...when it cycles before it jams up does it fire ok or does it spit out more/less than it should? Could be hopup if thats the case..
__________________
Airsoft Armory Joe Burton President/C.E.O Avid Headhunter "Call me Sandman, I'll put em all to sleep." |
|
|
|
|
September 6th, 2011, 21:51
|
#3 |
|
When the gun fails to fire, are you in semi? Have you tried switching to auto and fire again?
__________________
 5.56x45mm + m27 = M249(SAW) |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
