VFC AK74 wiring problems

HaloSix4 · April 11th, 2011, 21:34

Hey guys, for the last 3 days I've been rebuilding a VFC AK74, but I'm having a problem with the wiring. Right now I have a "realistic bolt" for it and would like to keep it like that, and not have to switch to the shitty little metal plate when I'm going to game this.

The problem I'm having is when I try to put the wires through the stock tang and into the full stock, the gun will fire a few shots and jam up. After that I have to release the A-R Latch, then it will not fire again. But the gun fire 100% fine when its wired to the top or the box out of the receiver.

I've been trying a bunch of things and nothing seem to be working. Any help is appreciated.

Thanks

Styrak · April 11th, 2011, 22:14

It might be an extra connetor causing more resistance. What kind of battery are you using, all stats?

HaloSix4 · April 11th, 2011, 22:34

Well I've tried with and with out the extra connector, and got the same thing. I've tried every thing from 11.4v Lipo's to a 7.4v Ni-cad, same thing every time, but its weird that it only does it when its rear wired.

Styrak · April 11th, 2011, 23:44

The location of wiring won't change anything. You've either got a short or a bad connection.

HaloSix4 · April 12th, 2011, 00:34

Could be a short, but the wires seem fine. Oh well, I guess I'll replace them and see what happens.

Thanks

Styrak · April 12th, 2011, 00:44

Or you could give it to a gundoctor who can take a better look at it.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 11th, 2011, 21:34	#1
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	VFC AK74 wiring problems Hey guys, for the last 3 days I've been rebuilding a VFC AK74, but I'm having a problem with the wiring. Right now I have a "realistic bolt" for it and would like to keep it like that, and not have to switch to the shitty little metal plate when I'm going to game this. The problem I'm having is when I try to put the wires through the stock tang and into the full stock, the gun will fire a few shots and jam up. After that I have to release the A-R Latch, then it will not fire again. But the gun fire 100% fine when its wired to the top or the box out of the receiver. I've been trying a bunch of things and nothing seem to be working. Any help is appreciated. Thanks

April 11th, 2011, 22:14	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	It might be an extra connetor causing more resistance. What kind of battery are you using, all stats? __________________ Airsoft Sales and Repair/Upgrade Services

April 11th, 2011, 23:44	#4
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	The location of wiring won't change anything. You've either got a short or a bad connection. __________________ Airsoft Sales and Repair/Upgrade Services

April 11th, 2011, 22:34	#3
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	Well I've tried with and with out the extra connector, and got the same thing. I've tried every thing from 11.4v Lipo's to a 7.4v Ni-cad, same thing every time, but its weird that it only does it when its rear wired.

April 12th, 2011, 00:34	#5
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	Could be a short, but the wires seem fine. Oh well, I guess I'll replace them and see what happens. Thanks

April 12th, 2011, 00:44	#6
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Or you could give it to a gundoctor who can take a better look at it. __________________ Airsoft Sales and Repair/Upgrade Services

VFC AK74 wiring problems

Doctor's Corner