Field strip!

Delta Charlie · February 24th, 2011, 23:35

Hey guys, just a quick question for ya... I just recently purchased an Aftermath CQB Knight aeg from cabelas, and I was trying to find out how to take it apart. It looks to just have a simple one pin pop out, but Im afraid if I do it, parts will pop out and I will never beable to use it again. Any help would be great, thanks

six4 · February 24th, 2011, 23:46

Quote:

Originally Posted by Delta Charlie

Hey guys, just a quick question for ya... I just recently purchased an Aftermath CQB Knight aeg from cabelas, and I was trying to find out how to take it apart. It looks to just have a simple one pin pop out, but Im afraid if I do it, parts will pop out and I will never beable to use it again. Any help would be great, thanks

Taking something apart that isnt broken is not recommended and it will also ( most likely ) void cabella's 30 day return policy. I looked it up on youtube and all I got was a bunch of 14yo sounding kids doing "kitchen table" reviews on it (which is hard to watch for any length of time lol ) best advice is to play it until it breaks then worry about disassembly.

ebfud · February 24th, 2011, 23:50

its as simple as taking out the two body pins and any roll pins, then sliding the upper off to reveal inside. nothing will pop out unless you disassemble your mechbox. but ye i highly recomend you dont to preserve your warranty.

Delta Charlie · February 25th, 2011, 00:36

But what if say I wanted to upgrade it (which the gun is supposivly compatible with), and Ive seen other guns like it and what Im guessing is you just pop the one pin out and then the gun folds forward. Thanks though for the suggestions, I'm probly not gunna take it apart untill something goes wrong

ebfud · February 25th, 2011, 00:40

its always reccomended as well to game your guns before you upgrade them to see if they need it. also the folding open wont happen on an aeg the mechbox holds it down it must be slidden off

Delta Charlie · February 25th, 2011, 01:11

Oh, okay thankkks

Thanh · February 25th, 2011, 01:37

youtube it, and follow the instruction. If the youtube vid looks too scary then dont do it. AEG isn't really something you would field strip, maybe a gbbr you would.

moz_boz · February 25th, 2011, 09:13

I am going on a year with my G&G M4, the only upgrade I did was a longer barrel. I am using the Stiff Dick approach for everything else...if it works, don't mess with it!

IggysPiggy · February 27th, 2011, 14:32

the knight cqb does not slide apart as mentioned. it is a fold open style. there is a rear pin that MUST be removed and I prefer to remove the front as well then the upper and lower can be split be carefully yanking the rear out of the upper( be careful as the rear pin is inserted thru two tabs that are part of the upper DO NOT BREAK THEM).

If you need a more indepth break down PM me and I will see what I can do.

Cheers, Jesse

Delta Charlie · April 10th, 2011, 12:34

Quote:

Originally Posted by IggysPiggy

the knight cqb does not slide apart as mentioned. it is a fold open style. there is a rear pin that MUST be removed and I prefer to remove the front as well then the upper and lower can be split be carefully yanking the rear out of the upper( be careful as the rear pin is inserted thru two tabs that are part of the upper DO NOT BREAK THEM).

If you need a more indepth break down PM me and I will see what I can do.

Cheers, Jesse

could you post a video please?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 24th, 2011, 23:35	#1
Delta Charlie Trader rating Join Date: Feb 2011	Field strip! Hey guys, just a quick question for ya... I just recently purchased an Aftermath CQB Knight aeg from cabelas, and I was trying to find out how to take it apart. It looks to just have a simple one pin pop out, but Im afraid if I do it, parts will pop out and I will never beable to use it again. Any help would be great, thanks

February 25th, 2011, 09:13	#8
moz_boz hates all f'n Americans Trader rating Join Date: Apr 2010 Location: Brampton, ON	I am going on a year with my G&G M4, the only upgrade I did was a longer barrel. I am using the Stiff Dick approach for everything else...if it works, don't mess with it! __________________ *"Sero Sed Serio"*

February 25th, 2011, 00:36	#4
Delta Charlie Trader rating Join Date: Feb 2011	But what if say I wanted to upgrade it (which the gun is supposivly compatible with), and Ive seen other guns like it and what Im guessing is you just pop the one pin out and then the gun folds forward. Thanks though for the suggestions, I'm probly not gunna take it apart untill something goes wrong

February 25th, 2011, 01:11	#6
Delta Charlie Trader rating Join Date: Feb 2011	Oh, okay thankkks

February 25th, 2011, 01:37	#7
Thanh AKA Tsquared Trader rating Join Date: Feb 2004 Location: Toronto	youtube it, and follow the instruction. If the youtube vid looks too scary then dont do it. AEG isn't really something you would field strip, maybe a gbbr you would.

February 27th, 2011, 14:32	#9
IggysPiggy Trader rating Join Date: Sep 2007	the knight cqb does not slide apart as mentioned. it is a fold open style. there is a rear pin that MUST be removed and I prefer to remove the front as well then the upper and lower can be split be carefully yanking the rear out of the upper( be careful as the rear pin is inserted thru two tabs that are part of the upper DO NOT BREAK THEM). If you need a more indepth break down PM me and I will see what I can do. Cheers, Jesse

Field strip!

Doctor's Corner