|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 24th, 2011, 19:55 | #1 |
Talraga
|
G36 Charging handle?
Well I've got a small problem.
I was test firing a new CA G36k I recently acquired, and was holding the bolt open with the charging handle to adjust the hop up... I guess I was pulling a bit too hard because suddenly the end piece that rotates 90 degrees so you can operate the charging handle easier snapped off. Unfortunately I dropped the damn piece in surprise and now I can't find the bloody thing. I checked Airsoftparts.ca to see if they had a replacement, and unfortunately they do not. Does anyone know how or even if I can replace this piece? *UPDATE* Found the missing piece, may be able to fix with a bit of super glue and epoxy. I would still prefer to outright replace the piece so I'm not dealing with a weakened repaired component.
__________________
Last edited by Greenwolf; January 24th, 2011 at 20:13.. |
January 24th, 2011, 20:25 | #2 |
Ithink Uncompany has complete spare fake bolts, I don't think you find just the plastic part... Should have bought an ARES
|
|
January 24th, 2011, 21:37 | #3 | |
Talraga
|
Quote:
Also, would prefer something in Canada if possible... ordering something that small from overseas would not be worth the shipping.
__________________
|
|
January 25th, 2011, 18:26 | #4 |
You won't find it in canada...
And before ordering, send then an email and ask them from letter mail shipping. That part is small enough to be shipped for under 5$ |
|
January 25th, 2011, 18:51 | #5 |
You'll have to order from somewhere. Many places carry replacement Charging Handles; it won't be hard to find one. You'll have to buy the entire Charging Handle though, and it'll run you around $25, not including shipping.
__________________
Airsoft It's all fun and games until someone gets hurt...and then it becomes sport! |
|
|
Bookmarks |
|
|