Hi-Capa Part

DawnsLight92 · January 14th, 2011, 20:49

So I was doing a quick disassemly on my WE Hi-Capa 5.1 today, when a spring decided to eject a crucial pin.

Does anyone know where I could get one? Its the one that the screwdriver is pointed at.

juicy · January 15th, 2011, 02:42

http://shop.ehobbyasia.com/nine-ball...-capa-5-1.html

I'm fairly certain ILLusion (ILLusion Kinetics, here on ASC) carries either the aftermarket one or the stock TM plungers/plunger sets, as well.

DawnsLight92 · January 16th, 2011, 00:04

Thanks! Order off Ehobby Asia, just waiting to get it now.

juicy · January 16th, 2011, 03:30

A exploded parts diagram helps a bunch. WE is sort of a clone of the TM, though if you could get a WE, that'd probably be better to you.

DawnsLight92 · January 16th, 2011, 21:05

I compared the exploded parts diagram I had with the part shown on the sight and it was a match, as well I only needed one pin in the plunger, so getting the set is just a bonus.

juicy · January 16th, 2011, 22:45

Oh so you DO have an exploded parts diagram. Generally it helps if you have a parts number (along with the make and model of gun)... you can usually just google the part then. Not sure about for WE's, though.

DawnsLight92 · January 17th, 2011, 01:48

The problem I ran into there is that because its a WE and not a TM, the part has a different number and doesnt have the support for replacement parts for it. I jsut needed to know what the TM equivilant part was.

m102404 · January 17th, 2011, 08:05

if you can't find someone that has an extra lying around...use a finishing nail and cut/file it to length.

It's really not a complex part, but you do have to round off the tip nicely or it'll hang up on your thumb safety.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 14th, 2011, 20:49	#1
DawnsLight92 Trader rating Join Date: Feb 2010 Location: Port Coquitlam, BC	Hi-Capa Part So I was doing a quick disassemly on my WE Hi-Capa 5.1 today, when a spring decided to eject a crucial pin. Does anyone know where I could get one? Its the one that the screwdriver is pointed at. __________________ Airsoft Perks: [Dedicated][Chairsofter][I Mean Business][Party Member][Stealthy-1hr 20min behind enemy lines][Cheap Bastid][Sugar Rush][Steady Aim-5 misses at 8 ft][Spider Sense][Pimped Gun-Tactical RPK/Shotgun][Hippie][Death or Glory]

January 16th, 2011, 00:04	#3
DawnsLight92 Trader rating Join Date: Feb 2010 Location: Port Coquitlam, BC	Thanks! Order off Ehobby Asia, just waiting to get it now. __________________ Airsoft Perks: [Dedicated][Chairsofter][I Mean Business][Party Member][Stealthy-1hr 20min behind enemy lines][Cheap Bastid][Sugar Rush][Steady Aim-5 misses at 8 ft][Spider Sense][Pimped Gun-Tactical RPK/Shotgun][Hippie][Death or Glory]

January 16th, 2011, 21:05	#5
DawnsLight92 Trader rating Join Date: Feb 2010 Location: Port Coquitlam, BC	I compared the exploded parts diagram I had with the part shown on the sight and it was a match, as well I only needed one pin in the plunger, so getting the set is just a bonus. __________________ Airsoft Perks: [Dedicated][Chairsofter][I Mean Business][Party Member][Stealthy-1hr 20min behind enemy lines][Cheap Bastid][Sugar Rush][Steady Aim-5 misses at 8 ft][Spider Sense][Pimped Gun-Tactical RPK/Shotgun][Hippie][Death or Glory]

January 15th, 2011, 02:42	#2
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	http://shop.ehobbyasia.com/nine-ball...-capa-5-1.html I'm fairly certain ILLusion (ILLusion Kinetics, here on ASC) carries either the aftermarket one or the stock TM plungers/plunger sets, as well.

January 16th, 2011, 03:30	#4
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	A exploded parts diagram helps a bunch. WE is sort of a clone of the TM, though if you could get a WE, that'd probably be better to you.

January 16th, 2011, 22:45	#6
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	Oh so you DO have an exploded parts diagram. Generally it helps if you have a parts number (along with the make and model of gun)... you can usually just google the part then. Not sure about for WE's, though.

January 17th, 2011, 01:48	#7
DawnsLight92 Trader rating Join Date: Feb 2010 Location: Port Coquitlam, BC	The problem I ran into there is that because its a WE and not a TM, the part has a different number and doesnt have the support for replacement parts for it. I jsut needed to know what the TM equivilant part was. __________________ Airsoft Perks: [Dedicated][Chairsofter][I Mean Business][Party Member][Stealthy-1hr 20min behind enemy lines][Cheap Bastid][Sugar Rush][Steady Aim-5 misses at 8 ft][Spider Sense][Pimped Gun-Tactical RPK/Shotgun][Hippie][Death or Glory]

January 17th, 2011, 08:05	#8
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	if you can't find someone that has an extra lying around...use a finishing nail and cut/file it to length. It's really not a complex part, but you do have to round off the tip nicely or it'll hang up on your thumb safety.

Hi-Capa Part

Doctor's Corner