UMP: G&G or STAR?+ Battle of the Bullpups

Spike · September 22nd, 2010, 01:32

I've got my eye on getting a UMP, I'm done with the AR platform for now. I got a chance to use a friend's G&G at a game once, and it was one of the most fun games I ever played.

My question to you guys is, would you recommend the Star/Ares or the G&G?

So far I'm leaning toward the G&G, as the mags seem more common, and they seem to be easier to get in Canada. I like upgrading my guns (esp. Compression system and barrel/hop up) so that's something to take into account as well, which one takes upgrades better?

Short Round · September 22nd, 2010, 11:06

G&G, personally I'm not a fan of Star but that's just me. My friend does have the UMG by G&G and it handles well, now it was upgraded but still, overall a solid gun.

I guess you can't go wrong with UMPs, as there aren't a lot of models out on the market (other then the G&G, CA, and Star).

Just make sure you find a specific custom UMG battery as it doesn't take regular batteries.

Good luck

DarkAngel · September 22nd, 2010, 13:31

CA makes a UMP.
I highly recommend it over the G&G and STAR.

Spike · September 22nd, 2010, 15:15

Holy cockandballs I forgot about CA. Well that's pretty much settled then. What is the mag compatibility on them?

Rabbit · September 22nd, 2010, 15:43

Speaking from expirience with a G&G UMG i'd go with one over any other. After doing a good amount of research before buying, i've also read that the CA make drains a battery at a much faster rate than the G&G brand - yes this was done on a comparison.

A lot of people expect full metal with CA, but just keep in mind pretty much 90% of a UMP in real life is not metal.

ROF is also insane on the G&G UMG with a 9.6v if you're into that at all.

Short Round · September 22nd, 2010, 16:26

Quote:

Originally Posted by Spike

Holy cockandballs I forgot about CA. Well that's pretty much settled then. What is the mag compatibility on them?

http://www.airsoftcanada.com/showthread.php?t=103742

BAM!

cjboi · September 22nd, 2010, 16:29

CA's internals vs G&G internals? hmmmm I say G&G wins. Taiwan product over China product.

Spike · September 22nd, 2010, 16:37

Well I'd be replacing CA's horrible piston of doom anyway, since I get aftermarket pistons in all my guns (stock ones always break on me).

Thanks for the link

DarkAngel · September 22nd, 2010, 17:12

Quote:

Originally Posted by cjboi

CA's internals vs G&G internals? hmmmm I say G&G wins. Taiwan product over China product.

*choke* What?!

CA isnt China (Mainland), its Hong Kong. Theres a HUGE difference.

CA has far better quality internals than G&G. Both in QC and Materials.

G&G may be getting better than the paperweights that they used to sell, but theres no way in hell they compare in quality to a CA. As for Stock fps, that is not a measure of quality, so dont even bother mentioning out of box fps.

cjboi · September 22nd, 2010, 18:02

Quote:

Originally Posted by DarkAngel

*choke* What?!

CA isnt China (Mainland), its Hong Kong. Theres a HUGE difference.

CA has far better quality internals than G&G. Both in QC and Materials.

G&G may be getting better than the paperweights that they used to sell, but theres no way in hell they compare in quality to a CA. As for Stock fps, that is not a measure of quality, so dont even bother mentioning out of box fps.

that's still in CHINA lol (china made)... I know for a fact CA's gears are great and the externals, but that's it. I personally like G&G UMP over CA UMC.
What im trying to say, G&G UMP out of the box is good, CA out of the box is also good. You might wanna change the piston head for G&G UMP for better air seal and for CA UMP you might have to change the piston, piston head, bushings and the nozzle. External wise both the same... I hope this helps you spike

GBear · September 22nd, 2010, 18:25

I was wondering this question myself. Thank you guys! However, I was told to go with a MP5 instead, although I would like a UMP.

Taxt · September 22nd, 2010, 18:42

I have G&G UMG with painted upper reciever. I really like it. Great rate of fire, groupings, fps. Solid construction.
Goes trough 8.4v 1300mAh like there is no tommorow though.

Taxt · September 22nd, 2010, 18:47

My recommendation would be, if you need a small capable gun. Go with MP5SD6 or similar. It probably be lighter a little, shorter mags which you actually can find, sliding stock (big plus on my books), won't look as badass as UMG but hey..

Spike · September 22nd, 2010, 19:15

Thanks for the info guys. I'm actually at a tossup on what I want my new primary to be, and it's down between the UMP and the Tavor. If I pick the UMP, i'll go with either the G&G or the CA, for sure.

Short Round · September 22nd, 2010, 19:17

Quote:

Originally Posted by Spike

Thanks for the info guys. I'm actually at a tossup on what I want my new primary to be, and it's down between the UMP and the Tavor. If I pick the UMP, i'll go with either the G&G or the CA, for sure.

Tavor haha that gun is a sexy beast, hands down.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 22nd, 2010, 01:32	#1
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	UMP: G&G or STAR?+ Battle of the Bullpups I've got my eye on getting a UMP, I'm done with the AR platform for now. I got a chance to use a friend's G&G at a game once, and it was one of the most fun games I ever played. My question to you guys is, would you recommend the Star/Ares or the G&G? So far I'm leaning toward the G&G, as the mags seem more common, and they seem to be easier to get in Canada. I like upgrading my guns (esp. Compression system and barrel/hop up) so that's something to take into account as well, which one takes upgrades better? __________________ I change primaries like other people change socks. Last edited by Spike; September 24th, 2010 at 17:06..

September 22nd, 2010, 13:31	#3
DarkAngel * Age Verifier status suspended * Trader rating Join Date: Jun 2006 Location: Scarborough	CA makes a UMP. I highly recommend it over the G&G and STAR. __________________ Certified Sniper Clinic Instructor and Counter Sniper Sentinel Arms Customs - Specializing In Unique, One of a kind guns

September 22nd, 2010, 15:15	#4
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Holy cockandballs I forgot about CA. Well that's pretty much settled then. What is the mag compatibility on them? __________________ I change primaries like other people change socks.

September 22nd, 2010, 11:06	#2
Short Round Najohn Trader rating Join Date: Aug 2009 Location: SkyDome	G&G, personally I'm not a fan of Star but that's just me. My friend does have the UMG by G&G and it handles well, now it was upgraded but still, overall a solid gun. I guess you can't go wrong with UMPs, as there aren't a lot of models out on the market (other then the G&G, CA, and Star). Just make sure you find a specific custom UMG battery as it doesn't take regular batteries. Good luck

September 22nd, 2010, 15:43	#5
Rabbit formerly FrankieCees, Remylebeau Trader rating Join Date: May 2010 Location: Hamilton	Speaking from expirience with a G&G UMG i'd go with one over any other. After doing a good amount of research before buying, i've also read that the CA make drains a battery at a much faster rate than the G&G brand - yes this was done on a comparison. A lot of people expect full metal with CA, but just keep in mind pretty much 90% of a UMP in real life is not metal. ROF is also insane on the G&G UMG with a 9.6v if you're into that at all.

September 22nd, 2010, 16:29	#7
cjboi Trader rating Join Date: Oct 2009 Location: manitoba	CA's internals vs G&G internals? hmmmm I say G&G wins. Taiwan product over China product. __________________ how can you help someone else if they're not willing to help themselves. Last edited by cjboi; September 22nd, 2010 at 16:31..

September 22nd, 2010, 16:37	#8
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Well I'd be replacing CA's horrible piston of doom anyway, since I get aftermarket pistons in all my guns (stock ones always break on me). Thanks for the link __________________ I change primaries like other people change socks.

September 22nd, 2010, 18:42	#12
Taxt Trader rating Join Date: Jul 2010 Location: Toronto	I have G&G UMG with painted upper reciever. I really like it. Great rate of fire, groupings, fps. Solid construction. Goes trough 8.4v 1300mAh like there is no tommorow though.

September 22nd, 2010, 18:47	#13
Taxt Trader rating Join Date: Jul 2010 Location: Toronto	My recommendation would be, if you need a small capable gun. Go with MP5SD6 or similar. It probably be lighter a little, shorter mags which you actually can find, sliding stock (big plus on my books), won't look as badass as UMG but hey..

September 22nd, 2010, 19:15	#14
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Thanks for the info guys. I'm actually at a tossup on what I want my new primary to be, and it's down between the UMP and the Tavor. If I pick the UMP, i'll go with either the G&G or the CA, for sure. __________________ I change primaries like other people change socks.

UMP: G&G or STAR?+ Battle of the Bullpups

Airsoft Guns Discussion