|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 31st, 2010, 19:28
|
#1 |
|
Bell M1911A1 issues.
Hey everyone, I just acquired a Bell M1911A1, and I am having a problem already! When I am firing, I can only get off one or two shots before I have a stopage, what's happening is the slide blows back and knocks the hammer back, but the hammer isn't always catching on the sear. It is at about 50/50 right now for when it actually connects. I would hazard to say my sear is worn out, but I have no experience with GBB, this is my first one. Anyone have any ideas what is going on?
__________________
A CTV reporter, while interviewing a Canadian sniper, asked; What do you feel when you shoot a terrorist? The Canadian sniper, smirked and replied; Recoil! 
|
|
|
|
August 31st, 2010, 19:47
|
#2 |
|
The sear ain't worn out, you just have one of the most common lemons on Bell : sear not correctly molded/cut. Change it if you can or scrap it and buy a KJW.
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting) 
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
