|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 29th, 2010, 16:48
|
#1 |
|
V2 gearbox help
I recently aquired a G&G GR4 CQB, the gun needs a fair amount of work. I just rewired the entire gearbox, put it back together to see if it worked and it didn't fire. I took the motor out far enough so it wasn't hitting the other gears and it is working great.
so it's getting power. I tried playing with the grip screw to back it off a bit thinking it was too tight and it just makes that grinding sound when it's not fulling engaging the gears. tightened it a little bit and then just clicks when I pull the trigger. I can only get it to do either or but not actually fire. Any suggestions on what should be my next step? |
|
|
|
June 29th, 2010, 16:51
|
#2 |
|
Several possibilities here.
Try a powerful battery, another motor, a circuit tester to see how much power loss there is between battery and motor. |
|
|
|
|
June 29th, 2010, 18:34
|
#3 |
|
|
no luck there, tried another motor same thing. Motor works in my other AEG. checked wiring, it's all good.
|
|
|
|
|
June 29th, 2010, 18:35
|
#4 |
|
|
also tried with the piston and spring out, didn't make a difference. gears are moving easy when I move them with my finger when the gearbox is assembled without piston
|
|
|
|
|
June 29th, 2010, 19:18
|
#5 |
|
Did you reshim it? Perhaps you did it too tightly if you did.
When you're turning the gears by hand is the mechbox screwed down?
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
June 29th, 2010, 19:20
|
#6 |
|
Administrator
|
Motor connected the right way (pos-pos/neg-neg)? AV latch reversed?
__________________
ASC Age Verifier for Red Deer & Area Alberta |
|
|
|
|
June 29th, 2010, 19:44
|
#7 |
|
|
when turning the gears by hand it is screwed down. also motor is hooked up correctly.
|
|
|
|
|
June 29th, 2010, 23:16
|
#8 |
|
|
some progress has been made. I reshimmed the gears again. Took out the piston and cylinder just to see if I could get the gears turning with the power from the motor. so I eventually got the gears turning. Now I'm thinking this has to be it, but no. I put the piston and cylinder in and the click is back. Now I pull the trigger and I get nothing.
Any ideas on what I should try next? |
|
|
|
|
June 29th, 2010, 23:50
|
#9 |
|
|
What battery are you using (all details) and what power spring?
Might just be your battery vs spring power.
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
June 30th, 2010, 00:21
|
#10 |
|
|
I was using an 8.4v 1400mah, and have no idea what the spring is. I have a M110 so I'll probably throw that in just to see what's up, and I'll try my 9.6 and see where that gets me
|
|
|
|
|
June 30th, 2010, 00:48
|
#11 |
|
|
Try a large type battery. If that works (or your 9.6v mini works) then you don't have enough power to pull the spring.
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
