CA M24, still in need for overhaul

[RedHammer]

Hi all

My CA M24 (With the CA Tune Up kit) Still needs a complete overhaul, last years attempt at contacting Stalker ended in no words spoken.

Still wondering if anyone knows where I can get seals, o-rings and gaskets for this beast without buying the tune up kit again, which I am reluctant to do considering that the parts themselfes are in Perfect A-OK condition, merely needs new seals and such.


Sincerely Yours

RH

[Spawn28]

Have you tried PM'in Amos i know he knows his way around the M24

[CDN_Stalker]

I don't recall getting a PM from you about it. Odd.

Anyways, looks like you have the gas bolt, I can't provide any info on it at all simply because it's such an extreme rarity and not worth the cash, there isn't much info available on it.

[RedHammer]

Thx for quick replies!

Mine is manual sir, lemme get the pics of the post I made back then. I`m pretty sure it was the spring focused CA Tune up kit, looking at pictures of the web thats exactly what all the parts look like.

Edit; Found them

http://www.airsoftcanada.com/attachm...7&d=1243593811
http://www.airsoftcanada.com/attachm...9&d=1243593885
http://www.airsoftcanada.com/attachm...3&d=1243594477
http://www.airsoftcanada.com/attachm...4&d=1243594477
http://www.airsoftcanada.com/attachm...0&d=1243593885
http://www.airsoftcanada.com/attachm...1&d=1243593885
http://www.airsoftcanada.com/attachm...8&d=1243593885
http://www.airsoftcanada.com/attachm...2&d=1243593885


The gun is basically in the same state now, have actually used it a lot too, and all metal parts are still ok, just needs seals, gaskets and o-rings to get proper performance.


Sincerely Yours

RH

[MilanWG]

Check out PDI:

Scroll to the bottom, should help you out...

http://www.x-fire.org/etop/aps2.html

[CDN_Stalker]

Ah, is just a spring set up (the best one). Because you said seals, gaskets and O-rings I automatically assumed the gas upgrade in it, simply because there are no seals, gaskets or O-rings (except in the hop up and your piston head if it needs an O-ring) in the spring version.

Now that we sorted that out, what exactly are you looking to replace since you don't need most of what you are asking for.

[RedHammer]

Originally Posted by CDN_Stalker

Ah, is just a spring set up (the best one). Because you said seals, gaskets and O-rings I automatically assumed the gas upgrade in it, simply because there are no seals, gaskets or O-rings (except in the hop up and your piston head if it needs an O-ring) in the spring version.

Now that we sorted that out, what exactly are you looking to replace since you don't need most of what you are asking for.

Yeah I love this set up, can still, after a few tries, get some relatively good hits at around 30-40 meters.

Basically I need to replace all of the o-rings but none of the metal parts except for the bolt handle itself (The 3 spring loaded balls on the part of the bolt handle that touches the bolt when you operate it up and down, are worn straight off :P ) And I dont know where to look for these parts except for the link which TALIBANMILAN just added, that link looks really useful! Thanks to a bit of patience and understanding we are getting somewhere, thx people!

With many of the rings on my piece basically missing (Some of them even came out the barrel as I fired the thing, and as I understand, theres stuff called Y rings too, which is also worn out and/or missing on my gun) I need a bit of help finding the right rings and where to install them (And if I need any sort of glue or such.)

I really shouldnt have kept on firing the gun despite its mentioned problems, that was reckless but I simply had to choose the right gun for the job.

If theres anything I can do on my end to help you understand the problem better, please do not hesitate to give instructions.

Sincerely Yours

RH

[Treefingers]

Airsoft global sells the classic army bolt handle with the little springs and ball bearings for about $30 i believe. Or you can go with PDI if you have the money to spend.

[Kos-Mos]

You should take appart your bolt, and bring the parts where you need to fit a o-ring to a small hardware store. Not the larger Rona or HomeDepot...

They will usually have a bulk of random o-rings in a box somewhere behind the counter... I am going to my local store when I need some rings like that, always find the right one for maybe 75 cents...

[MilanWG]

http://www.x-fire.org/aps2/e.repair_o_piston.html

http://www.x-fire.org/aps2/e.re_oyring.html