|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
May 6th, 2010, 23:48
|
#1 |
2 piece gearbox not fitting in back!!
i recently got my gun its an ICS-20 retractable m4 a1 maybe 3 weeks ago it has a 2 piece gear box so it breaks like a real gun
just like that: so i pull out the pin and it did just like the image you see ubove you.but know i cant put it back in like normal & cant even force it in i checked and theres nothing currently im fustrated  because i dont know what to do bacause this is my first gun & i dont whant to mess up something.i hope some1 can help me with this. |
|
|
|
|
May 6th, 2010, 23:49
|
#2 | |
|
Can't fix my own guns. Willing to fix yours.
|
turn the gears by hand so that the teeth on the sector gear arent pointed up, they may be mashing into the piston if you didnt use the forward assist before splitting it
__________________
 Words to live by Quote:
|
|
|
|
|
|
May 6th, 2010, 23:51
|
#3 |
|
what?
im new what does hand sop mean??
|
|
|
|
|
|
May 6th, 2010, 23:51
|
#4 | |
|
Can't fix my own guns. Willing to fix yours.
|
was a typo, fixed
__________________
Words to live by Quote:
Last edited by Thenooblord; May 6th, 2010 at 23:53.. |
|
|
|
|
|
May 6th, 2010, 23:57
|
#5 | |
|
Quote:
Last edited by oldairsofter1962; May 7th, 2010 at 00:02.. Reason: misse spelling |
||
|
|
|
|
May 7th, 2010, 00:03
|
#6 | |
|
did not work
Quote:
|
||
|
|
|
|
May 7th, 2010, 00:12
|
#7 |
|
Joeyaglr444
|
check the wiring next to the mag well. and is your weapons selecter on safety?
__________________
It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam. |
|
|
|
|
May 7th, 2010, 00:22
|
#8 | ||
|
Can't fix my own guns. Willing to fix yours.
|
Quote:
__________________
Words to live by Quote:
|
||
|
|
|
|
May 7th, 2010, 00:36
|
#9 |
|
If all else fails you can do 2 things:
1)Take the mechbox top out of the top receiver and try to identify where the fitment problem lies. 2)Take it to a gun doctor in your area. He will likely be able to identify the problem in a minimum of time and show you how to do it properly every time from then on. |
|
|
|
|
May 7th, 2010, 00:58
|
#10 |
|
a.k.a. greenpunk_182
|
The sector teeth need to be facing down so that the portion without any teeth is at the top of the lower mechbox.
After you align the gears, remove and then re-instal both the hop-up unit and upper mechbox. Make sure that the hop up spring is not bending and pushing the upper mechbox out too far ( a way to check this is when the hop up and upper mechbox are installed in the upper receiver, you should be able to push the rear body pin through the upper receiver and mechbox holes) hope that helps |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
