|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 8th, 2010, 15:23 | #1 |
a.k.a. LastSpartan
|
JG M4 S-System Upgrade guide?
Hi,
Recently, I painted my lower receiver and since the gun was opened, I wondered how I could boost my rifle internaly. A friend of mine suggested the following : Modify High Speed Ultra Piston - New Version http://www.airsoftparts.ca/store2/in...oducts_id=1369 MASK Sorbo Piston Head with Bearing - New Version http://www.airsoftparts.ca/store2/in...oducts_id=1184 MASK Pro Cylinder Head V2 http://www.airsoftparts.ca/store2/in...oducts_id=1317 Shredder's Concave Spacer http://www.airsoftparts.ca/store2/in...oducts_id=1593 He also suggested getting a new hop-up. (Stock Hop-Up is 2-pieces, AFAIK) Any suggestions? Should I ask a Gun Doc to install these for me, being new to the sport and all? And yes, I'm on a budget, so no FMU for now (Or new rifle) I'm not looking for a high ROF gun, I want more consistancy/accuracy. Lastly, I may buy a new gun (from here this time), so I just want to upgrade this one lightly, to be able to use it, and then use it as a backup/indoor gun. Thank you very much!
__________________
NEW BACON FOR SALE! "WHEN I DIE BURY ME UPSIDE DOWN SO THE WORLD CAN KISS MY ASS" -Platoon |
April 8th, 2010, 23:08 | #2 |
no spring upgrade?
|
|
April 8th, 2010, 23:15 | #3 | |
Quote:
That won't help. |
||
April 8th, 2010, 23:19 | #4 | ||
* KNOWN LIAR *
|
Why?
Quote:
__________________
Quote:
|
||
April 8th, 2010, 23:28 | #5 |
Tys
|
all of those upgrades are useless......
...if you don't know what you want out of it. Accuracy...Reliability...HighROF/quick trigger response...power...louder/quieter... I highly suggest you take a read through Greylock's and Skruface's upgrade threads..stickied in the Upgrades/Modifications forum section. They go over most common upgrades, and details of this type of part vs. that type of part. Solid gold information there. |
April 8th, 2010, 23:35 | #6 | |
a.k.a. LastSpartan
|
It was chrono'd at 392 at the store.
I still have to decide between keeping it for indoors, or outdoors and just swap springs. I didn't open the gearbox yet, so I don't want to go see a Gun Doc every week between games :P Quote:
__________________
NEW BACON FOR SALE! "WHEN I DIE BURY ME UPSIDE DOWN SO THE WORLD CAN KISS MY ASS" -Platoon |
|
April 8th, 2010, 23:37 | #7 |
When you get used to it, changing spring takes about 30 minutes in total. Probably a lot longer the first times.
If you intend to swap spring, you really should do it yourself, it's relatively easy to do. Check this out: www.mechbox.com This one especially: http://www.mechbox.com/mechbox/v2-me...g-upgrade.html |
|
April 9th, 2010, 17:46 | #8 |
a.k.a. LastSpartan
|
Alright, did my homeworks.
Watched pretty much every mechbox.com videos on M4s. Also read both threads suggested above. I made this temporary list, from what I read and understood could be good. I tried to stick with Modify to avoid fitting issues. What I didn't include (couldn't find it/find suitable one) Spring. Checked the spring s100 (Seems to shoot over 365 fps, too hot for indoor). I read there was a S90, although not on ASparts.ca. I know springs also weaken after some use. Switch Assembly for Rear-wiring (Electricity and me = big no no) Oil + Grease New hopup (JingGong one is really crappy, hard to use, etc.) Inner Barrel (Could wait) Any suggestions on things I forgot or things I don't need for now? I'm trying to stay within the 200$ range, as I still have other stuff to buy (Extra battery, good charger, etc.) Thank you very much for your help, really appreciated!
__________________
NEW BACON FOR SALE! "WHEN I DIE BURY ME UPSIDE DOWN SO THE WORLD CAN KISS MY ASS" -Platoon Last edited by Boyso; April 9th, 2010 at 17:49.. Reason: Added S90 info. |
|
Bookmarks |
|
|