September 17th, 2009, 00:31 | #46 | |
Official ASC Bladesmith
|
Quote:
Like I said, 0.36g is the heaviest anyone should go for using in a field legal gun. At Rawdon a couple years back, I was cleared to shoot my rifle set at 587fps, and used 0.36g BBs all day, I hit the square root of fuck all that day with my rifle, even shooting at guys 200ft away. The higher the velocity, the more unpredictable the BBs will fly. Last year I was testing and was able to get 0.30g BBs out to 300ft easy, and my rifle was shooting 340fps at that point the way I had it set up. Mind you, I was getting roughly 20ft groupings at that distance, but the rounds were still in the ballpark of where I was aiming and not flying off to the side after 150ft like I've seen before in lots of my tests at higher velocities. BTW, thanks for the new quote. Testing in zero gravity would be fun actually. Last edited by CDN_Stalker; September 17th, 2009 at 00:33.. |
|
September 17th, 2009, 10:04 | #47 | |
A Total Bastard
|
Quote:
Fox, you might find this useful, we just put it on our site (MSED - minimum safe engagement distance calculator). Its based on the AT Project that tends to get referenced every now and again, and from my research on the 'net, is probably the most useful, non partisan analysis of airsoft ballistics to date. http://www.bbbastard.com/index.php?o...d=53&Itemid=57 Put in your BB weight and then put in your chronied FPS, and press the calculate button - all other information is calculated for you. Refer to this article, http://www.bbbastard.com/index.php?o...d=54&Itemid=59 for the scientific assumptions behind the calculator. Note that "MED" in the article as an acronym refers to "Maximum Engagement Distance" (effective range). Don't confuse that with MSED as used above. Last edited by Scarecrow; September 17th, 2009 at 10:11.. |
|
September 17th, 2009, 10:19 | #48 |
Official ASC Bladesmith
|
Hehe, a MED 30ft for my set up based upon that calculator. I wouldn't even think about shooting a guy at that distance with my M24. Minimum for me would be 60ft, aiming at webbing.
|
September 17th, 2009, 12:39 | #49 |
Le Roi des poissons d'avril
|
MED, based on the data of the AT project, are set to have 1 joule at impact. So, a BA rifle chronied at 450fps, should have a MED of about 40fts if using .30g BBs. That should give about 1 joule at impact, wich is equivalent of a 15fts shot with 0.25g in CQB using a 350fps gun, chronied with .20g.
That make sence. We tend to over estimate the amount of force our rifles output in relation to distance. Don't get me wrong, 1 joule hurt, but it should not break the skin. Scarcrow, goot thing you added the little calculator based on the AT Porject. I'm using the charts for the sniper clinics and for all around reference. Whenever I thread like this pop up, I fetch it.
__________________
Vérificateur d'âge: Terrebonne |
September 17th, 2009, 15:41 | #50 | |
A Total Bastard
|
Quote:
What did you put in for a BB weight and chrony setting? |
|
September 17th, 2009, 15:56 | #51 |
Official ASC Bladesmith
|
At first I put in 0.36g BBs at 300fps (because I know there is roughly a 100fps drop between that weight and 0.20g), came up as 1.51 Joules, then plugged in what info I KNOW, 0.20g at 397fps, I got 1.46 Joules.
|
September 17th, 2009, 16:04 | #52 |
A Total Bastard
|
There are a lot of notes worth reading regard the output of numbers, particularly with sniper rifles. You should also have a read of this: http://www.bbbastard.com/ATP/06-c-01.htm Recommended Universal MEDs.
(this discussion is getting quite interesting). |
|
Bookmarks |
|
|