CAG36C Upgrade Questions

[Schwag]

I'm not going to look at your list. If you want a reliable 380 fps gun, get systema oilless bushings(NOT bearings), bearing spring guide, ported piston head, gears, spring and motor. Get the deepfire all titanium tooth piston.
It's hard to go wrong with systema. The more different manufacturers you use, the more likely you are to have compatibility issues.

Some guys recommend tight bores, I find them overrated.

Have a pro do it, not a hobbyist and then take care of your gun.

There is no real average lifetime for an aeg. It's like a car, the more you use it, the faster it dies.

[OneTimePoster]

well now that schwag said another of those names i don't know. whats a ported piston head?
and on that subject witch is better

same price
same number of reviews
same rating
same company
both have bearings

Systema Duracon piston head with bearings
Systema Aluminum piston head with bearings

thanks in advance! :wink:

[ThunderCactus]

All piston heads are ported, it's a part of their function.
both are the same, the duracon is plastic and the aluminum piston head is well...obvious.
An aluminum piston head gives you better consistency in FPS and therefore better accuracy, but creates a harder impact on your cylinder head since it doesn't slightly deform like the plastic piston head. This COULD result in the shattering of your cylinder head or cracking of your gearbox shell. If you have a TM gun I would recommend a SILENT piston head set, still has a ball bearing, comes with cylinder, cylinder head and piston head, and reduces the force of impact on your cylinder head.

[OneTimePoster]

thanks thundercactus for clearing that up I'm using a ca g36c and i think I'm going to go for the Systema Aluminum piston head with bearings for the extra accuracy.

[DarkAngel]

I already posted in your other thread regarding upgrades, I wont post it twice.
One of my guns is a 3000$ gun, trust me, If you upgrade one part, you need to upgrade ALL your gearbox parts. For example, if you just upgrade the spring, you risk a cylinder head blowout. Heavy springs can lead to piston teeth being shorn off etc. V3s arnt as bad as V2's but i imagine a reinforced mechbox for a heavy spring would be needed too. But then again, your 15... I dont think any local players would feel comfortable with you using anything other than stock especially considering most fields wouldnt allow you to play at all since your under 18 or even the 16 with supervision thing. Again though, read the existing posts and use the search, theres no need to make posts of the same questions that have been answered a hundred times on this forum. (Im referring to your other posts)