|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 16th, 2008, 00:52
|
#1 |
|
Replacing TM M14 Tappet Plate - Part make matter?
Hey guys,
The tappet plate on my TM m14 broke and am looking to order up a new one. Am I able to drop a G&G or King Arms one in without any issues?
__________________
ASA Member - DM |
|
|
|
July 16th, 2008, 06:55
|
#2 |
|
You have to open up the mechbox it self to remove the tappet plate. If you don't have experience with that, then find someone who does, to avoid giving yourself a headache.
If your going to try to do it yourself, check out mechbox.com to see instructional videos. |
|
|
|
|
July 16th, 2008, 07:40
|
#3 |
|
No you need an M14 tappet plate to replace the one that is broken.. King Arms makes one and its worth it. Once you get into your M14 a few times you can have it down to 1.15 hours to teardown tune and rebuild.
__________________
No Comment. |
|
|
|
|
July 16th, 2008, 11:14
|
#4 |
|
|
Thanks Hazard, so you figure the King Arms are better than the G&G ones?
__________________
ASA Member - DM |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
