|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 10th, 2006, 06:03 | #1 |
Glock cycle problem *solved*
I figured out the problem. I guess it was the weak same old stock recoil spring that couldn't put the metal slide back into battery correctly. Well all I did was field strip and stretch the recoil spring a little to make the recoil harder. It worked. But I wanted the guns RPM to be faster, so I bought an upgraded Metal Recoil Spring.
|
|
January 12th, 2008, 02:31 | #2 |
just a question my g18c refuses to fire full auto and now is refusing to fire semi the gas seems to be escaping from the barrel as if the slide is eating the rubber seal on the chamber? can u help?
mike
__________________
airborneboi69 |
|
July 15th, 2008, 09:39 | #3 |
that problem would probably be related to the rocket valve, its probably cracked or broken and needed to be replaced by a metal one, i could be wrong though..:banghead:
|
|
|
Bookmarks |
|
|