Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Decrease the ROF.

:

Upgrades & Modifications

Reply
 
Thread Tools
Old March 12th, 2008, 17:45   #16
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Quote:
Originally Posted by Azathoth View Post
7.2V batteries will do it.
+1, I just cut my batteries down myself, not terribly complicated.
ThunderCactus is offline   Reply With Quote
Old March 12th, 2008, 17:51   #17
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
Quote:
Originally Posted by Azathoth View Post
Doesnt the mah determine the stamina of the battery pack?

Generally, it does, but there is a lot more happening with the chemistry than your basic Ohm's law.

The larger the pack, the lower the cell internal resistance it has - and the lower the cell internal resistance, the more current the pack is able to crank out. If the pack is able to release more current, then the motor can draw closer to it's full potential. Limit the bandwidth of current by dropping to smaller cells, and the motor won't get as much juice as it needs which results in lower ROF and slower trigger response time.

ROF drops are less noticeable between say... a 1700mAh sub-C cell pack and a 2400mAh sub-C cell pack than it is between a 1700mAh A cell pack and a 2400mAh sub-C cell pack.

So in general, physically larger cells will exhibit higher ROF versus smaller cells.

At an extreme end of the scale, try powering a 400fps setup with an 8.4v 600mAh 2/3A cell mini pack and then try powering it with an 8.4v 2400mAh sub-C cell pack. Despite having the same voltage, you'll notice a HUGE ROF increase and a massive decrease in trigger response time when using the large pack.
On top of that, you'll notice the mini pack will get noticeably warmer than the large pack - this is the effect of all that internal resistance. The resisted energy has to go somewhere, and is released in the form of heat.
ILLusion is offline   Reply With Quote
Old March 12th, 2008, 18:12   #18
Naglfar
 
Naglfar's Avatar
 
Join Date: May 2007
Location: Ottawa
Quote:
Originally Posted by ILLusion View Post
Generally, it does, but there is a lot more happening with the chemistry than your basic Ohm's law.

The larger the pack, the lower the cell internal resistance it has - and the lower the cell internal resistance, the more current the pack is able to crank out. If the pack is able to release more current, then the motor can draw closer to it's full potential. Limit the bandwidth of current by dropping to smaller cells, and the motor won't get as much juice as it needs which results in lower ROF and slower trigger response time.

ROF drops are less noticeable between say... a 1700mAh sub-C cell pack and a 2400mAh sub-C cell pack than it is between a 1700mAh A cell pack and a 2400mAh sub-C cell pack.

So in general, physically larger cells will exhibit higher ROF versus smaller cells.

At an extreme end of the scale, try powering a 400fps setup with an 8.4v 600mAh 2/3A cell mini pack and then try powering it with an 8.4v 2400mAh sub-C cell pack. Despite having the same voltage, you'll notice a HUGE ROF increase and a massive decrease in trigger response time when using the large pack.
On top of that, you'll notice the mini pack will get noticeably warmer than the large pack - this is the effect of all that internal resistance. The resisted energy has to go somewhere, and is released in the form of heat.
Quoted for truth, though wouldn't you have a snappier trigger response with the larger pack?
Naglfar is offline   Reply With Quote
Old March 12th, 2008, 18:37   #19
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
Exactly, as I mentioned, it will result in a massive decrease in trigger response time when using the large pack.
ILLusion is offline   Reply With Quote
Old March 12th, 2008, 18:39   #20
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by Naglfar View Post
Quoted for truth, though wouldn't you have a snappier trigger response with the larger pack?
Haha, that was a Freudian slip from Illusion. Or just bad wording. He means a decrease in response time i.e a decrease in time between pulling the trigger and the gearbox cycling i.e BETTER trigger response time.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old March 13th, 2008, 16:46   #21
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
errrr. yeah. I can see where the confusion lays, now. I actually paused when typing that out...
ILLusion is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 19:46.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.