Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

questions about systema PTWs

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old February 26th, 2008, 18:44   #61
Lakonian
kos
 
Lakonian's Avatar
 
Join Date: Feb 2006
Location: Wherever.
Quote:
Originally Posted by Trader 762 View Post
I just got mine today in the mail!

Oh man, I've got a grin from ear to ear. The burst is really fun, and the grouping is pretty good, for what it is.

Single shot, well for some reason, I got a right hand curve for most bb's Its sighted with my red dot, the iron sights for some reason just don't line up, but I hardly use the iron sights anyways.

I've got the M16, so its longer and the added weight, well, lets just say, I'll need to work out with weights for me left arm only.

Either way, I am extremely happy for spending that kinda money on it. The PTW bug has bitten me and maybe even consider an M4 later, much later.

The only issue I have with the M16A3 is the initial upper receiver separation, I followed the picture from the manual and nearly gave myself a hernia, thumbs went all blue, started to sweat.

installing the battery was also a pain, and well, its staying in there discharge and charge, unless someone says thats a no-no.

Now all I gotta do is wait for my M.O.U.T chest pack from Seals Gear to arrive and I'm set for TTAC.

I really, really like the simulated bolt release, each time you change mags, tap that release and you're good to go.

For CBQ, the length will be a concern, but I'll just hang on the outside and cover their butts doing the entry.

Will need to get a sling for it, most likely a 2 point.

Oh, one more thing, do I need to spray lube in the mags once in a while?

Happy, Happy right now.
Awesome! Is your M16 an '08? I think that may be the first in Canada !

And I can't wait to see it! Let me know when you're going to ttac. Maybe we can get three ptws goin' at the same time (eh, stokes?!)
Lakonian is offline   Reply With Quote
Old February 26th, 2008, 20:02   #62
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
Quote:
Originally Posted by ILLusion View Post
Unfortunately, you'll have to remove the battery after each use, so no, you can't just leave it in there.

The circuit in the gun will apply a constant power draw on the battery. If you leave it in there long enough, the low current is enough to damage the battery by draining it below its minimum.

As long as the battery is disconnected from the gun, you'll be fine. I know that getting the battery in and out of the M16 is a pain, so I just leave mine in there, and charge it in the gun.
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
Old February 27th, 2008, 10:33   #63
MadMorbius
Guest
Quote:
Originally Posted by Trader 762 View Post
I
Single shot, well for some reason, I got a right hand curve for most bb's Its sighted with my red dot, the iron sights for some reason just don't line up, but I hardly use the iron sights anyways.
I wouldn't ignore that. You shouldn't have to settle for anything with a PTW. If the BB's are curving off sideways, the hop-up may not be working properly.

What year / generation is the PTW? I've heard of this with the older nubbings.
  Reply With Quote
Old February 27th, 2008, 11:49   #64
trevor
 
trevor's Avatar
 
Join Date: May 2006
Location: Red Deer
anytime my bb's curve a quick clean of the barrel fixes it. I found with my gun it needed a couple thousand rounds for the groupings to tighten up.
trevor is offline   Reply With Quote
Old February 27th, 2008, 13:57   #65
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
Systema uses their cylinder grease (lithium basically) to lube the hop-up components.

Give it a swab out, then run some rounds through it. The hop-up should be and stay dry, no silicone or anything in there. It will be most consistant that way.
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
Old February 27th, 2008, 21:13   #66
Trader 762
 
Trader 762's Avatar
 
Join Date: Jul 2007
Location: Toronto, ON
I have no clue what generation model mine is.

Thanks again for the help guys!
__________________
M16A3 MAX PTW,
TM G17,
6" straw

"Doubt all before you believe anything."
Sir Francis Bacon
Trader 762 is offline   Reply With Quote
Old February 27th, 2008, 22:41   #67
swatt13
Captain Awesome
 
swatt13's Avatar
 
Join Date: May 2005
Location: Greater Grande Prairie (greater than vancouver)
just peek at the board, clear plastic is 3.5, black is 4. mac can confirm this tho.
__________________
Age verifier southern Alberta

Quote:
Originally Posted by TokyoSeven
a Systema PTW is like KD, where the noodles are plated in gold and the cheese sauce is actually a pool of hot naked women.
swatt13 is offline   Reply With Quote
Old February 28th, 2008, 00:41   #68
Trader 762
 
Trader 762's Avatar
 
Join Date: Jul 2007
Location: Toronto, ON
Quote:
Originally Posted by swatt13 View Post
just peek at the board, clear plastic is 3.5, black is 4. mac can confirm this tho.
Yeah, that is like french to me.

What board should I look for, the one in the stock or in the lower receiver?

The board in the stock has a clear plastic sheathing. So if that is the one I should be looking for, then its a 3.5. No big deal. Its the weight that I was looking for and man, I am not looking forward to humping the C7 on BMQ. :'(

I did clean the barrel, but have yet to see if there is an increase in accuracy, or should I say, no more curve ball. Its way too dark outside.
__________________
M16A3 MAX PTW,
TM G17,
6" straw

"Doubt all before you believe anything."
Sir Francis Bacon
Trader 762 is offline   Reply With Quote
Old February 28th, 2008, 02:04   #69
wey ferro
 
wey ferro's Avatar
 
Join Date: Dec 2004
these guns suck, not worth the money.
go with clear soft!
__________________
www.ferroconcepts.com
wey ferro is offline   Reply With Quote
Old February 28th, 2008, 02:20   #70
Trader 762
 
Trader 762's Avatar
 
Join Date: Jul 2007
Location: Toronto, ON
Quote:
Originally Posted by wey ferro View Post
these guns suck, not worth the money.
go with clear soft!
too late.
__________________
M16A3 MAX PTW,
TM G17,
6" straw

"Doubt all before you believe anything."
Sir Francis Bacon
Trader 762 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 01:53.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.