tm hi-cappa loading nozzle

[the_spork_of_death]

any one know were i can find internals for a hi-cappa loading nozzle, WE or TM

[Daiviet]

you should be able to buy them directly from the retailers, like redwolf or WGC, shouldn't cost too much.

[KEVORKIAN]

What "exactly" do you need?
What exactly do you want?
Maybe I can help!
Drop me a PM...

KP

[The Saint]

http://www.airsoftparts.ca/store2/in...roducts_id=706

[RacingManiac]

I find if you need to replace your TM loading nozzle(usually because of it cracked) you might as well upgrade it to a better one.....SD sells a set with all the bits inside, though you want to keep your original floating valve and use in the SD nozzle or you gonna have all blow-back and no BB out the barrel....

[the_spork_of_death]

i replaced the loading nozzle, was all exited to have my wicked pistol back in action and forgot to switch the guts out from the old nozzle, by the time i realized why it was spewing gas every were and not reloading it was to late and the trash was taken out along with the guts i needed. silly little clip, small screw, piston (for lack of a better word)

[ILLusion]

Contact JAFA for the stock Tokyo Marui components, otherwise you can get aftermarket replacements for all the other parts (spring, floating valve & valve blocker).

The hardest thing to find is the screw.

[RacingManiac]

like everything airsoft really....Brafastco is useless as the sizes in these guns are too small...

[Shinjin_MC]

Originally Posted by ILLusion

Contact JAFA for the stock Tokyo Marui components, otherwise you can get aftermarket replacements for all the other parts (spring, floating valve & valve blocker).

The hardest thing to find is the screw.

if you go down to the optometrist and ask for a few eyeglasses screws they fit just fine
Im using one of those in one of my hicapas

[the_spork_of_death]

who or what is jafa?

[Scooby Steve]

JAFA is a member who can get us OEM replacement parts.

[T_A_N_K]

LOL I did the exact same thing. Mine snapped in half and i whipped it across the room losing all the guts. I got JAFA to get mine, However, I seem have to have misplaced them again.... lol

[The Saint]

leonardinjapan(at)hotmail(dot)com

The parts in question are:
H51-19 (screw)
H51-21 (floating valve spring)
H51-22 (floating valve)
H51-23 (floating valve bracket)

[the_spork_of_death]

thanks guys, that helped a lot