m4 style bb loaders

[six4]

these style of loaders sure save time on reloading,,,when they work that is! i suffered a bb loader breakdown at the dec 22nd game similiar to what savage haggis had on 3 of his m4 style bb loaders at the pilgrim game. funny thing is, nothing is broken, and system still functions,just doesnt feed. upon taking mine apart i noticed a small "hook" on one of the "actuating arms" ( for a lack of a better term ) that might be restricting the bb flow into the feed section of the loader. i thought that since it doesnt work as it is,no harm in experimenting and i snipped the small 2-3 mm piece off.



i put it back together and it feeds better than when it was new! im not sure if this will work in every case,but its worth a try.

(ps) watch for a small tiny o ring in the loaders feed tube.

[CDN_Stalker]

Thanks for the post, I just bought one of these (a King Arms one) and think it's great, big step over the pistol mag sized one I've been using for two years, but heard these loader break pretty easily. Good post for those that found this out the shitty way.

[ThunderCactus]

LOL
funny you should mention that, they made the plate move just far enough that a
BB could get lodged behind it. After filing off the pin that made the arm move, my BB loader worked fine but you had to shake it violently to get it to feed. I bought a TM loader of the same type and it works great.

[Andres]

I used to have a fair bit of jamming problems with that speedloader, but then after taking it apart a few times it works fantastic!

/end of pointless post