How to make a M11 Silencer?

aZn_triXta07 · December 16th, 2006, 16:24

I did a little bit of searching here and haven't really found anything. But I do know some people here on ASC have home-made silencers, and just wondering if anybody can help me out here. I have the HFC T77, the nozzle looks identical to the KSC M11 any help would be great, thanks!

markedman · December 17th, 2006, 09:46

There was a "How to" guide on Airsoft Players a while back. It was in the Airsoft e-mail section. The guy uses PVC pipes.and regular hardware. The thread on the KSC mac is 5/8-11. Sorry I'd give you a link to it but for some reason my computer can't find their server.

CDN_Stalker · December 17th, 2006, 12:25

I made a custom supressor for my M11, but as far as the screw on threads go, I had the machinist at work mill me an aluminum rear and he had to make a tool to lathe the threads. End result, the body is an old phenolic tool packaging tube I found, rear is 6061 aluminum, end cap is lathed nylon. I used a 1/4"ID brass tube as an inner barrel, drilled holes every inch on 4 sides for the last half of it, the muzzle end has no holes. Baffling I used alternating slices of copper pipe insulation foam.

When gun shot without, it gets around 330fps on propane, satisfying "BRAAAP!" sound. With the supressor I've gotten between 360-405fps with it, and the sound is really only the noise the bolt clacking back and forth makes.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 16th, 2006, 16:24	#1
aZn_triXta07 Trader rating Join Date: Nov 2005 Location: Toronto, Ontario	How to make a M11 Silencer? I did a little bit of searching here and haven't really found anything. But I do know some people here on ASC have home-made silencers, and just wondering if anybody can help me out here. I have the HFC T77, the nozzle looks identical to the KSC M11 any help would be great, thanks!

December 17th, 2006, 12:25	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	I made a custom supressor for my M11, but as far as the screw on threads go, I had the machinist at work mill me an aluminum rear and he had to make a tool to lathe the threads. End result, the body is an old phenolic tool packaging tube I found, rear is 6061 aluminum, end cap is lathed nylon. I used a 1/4"ID brass tube as an inner barrel, drilled holes every inch on 4 sides for the last half of it, the muzzle end has no holes. Baffling I used alternating slices of copper pipe insulation foam. When gun shot without, it gets around 330fps on propane, satisfying "BRAAAP!" sound. With the supressor I've gotten between 360-405fps with it, and the sound is really only the noise the bolt clacking back and forth makes. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

December 17th, 2006, 09:46	#2
markedman Trader rating Join Date: Jun 2004 Location: Calgary Alberta	There was a "How to" guide on Airsoft Players a while back. It was in the Airsoft e-mail section. The guy uses PVC pipes.and regular hardware. The thread on the KSC mac is 5/8-11. Sorry I'd give you a link to it but for some reason my computer can't find their server.

How to make a M11 Silencer?

Accessories Discussion