Marui mechbox in CA Gun?

nic_s · June 21st, 2006, 20:06

I'm getting pretty fed up with the internals of my CA36K. I've already had to replace the piston and gears with Marui ones, but I'm still not 100% happy with it. Anyone know here if it's conceivable to fit a Marui mechbox in my G36K?

CDN_Stalker · June 21st, 2006, 21:00

Word used to be the Version 2 TM mechboxes (with internals) were strongly suggested to be installed in CA guns to make them more reliable with a metal body. Supposedly a bit of filing and grinding were needed to fit properly. For a Version 3, I can't see much differnece, so I'll just give you aheads up that it most likely is possible, I'll just let the experienced tell you.

Russianboy · June 21st, 2006, 21:48

The shell on the CA gearbox's are thicker then TMs.

You may run into an issue with that V3. Or not, you never know.

mcguyver · June 21st, 2006, 22:05

I've put a few Marui mechboxes in C.A. Armalite metal bodies with ZERO mods. They slipped right in and worked like a dream. These same mechboxes would not go into a G&G metal body though.

I'm not sure about Ver. III though. Sorry.

nic_s · June 24th, 2006, 03:13

Bump, for great justice.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 21st, 2006, 20:06	#1
nic_s Trader rating Join Date: Oct 2004 Location: BC	Marui mechbox in CA Gun? I'm getting pretty fed up with the internals of my CA36K. I've already had to replace the piston and gears with Marui ones, but I'm still not 100% happy with it. Anyone know here if it's conceivable to fit a Marui mechbox in my G36K? __________________ ...and she's terribly partial to the periwinkle blue.

June 21st, 2006, 21:00	#2
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Word used to be the Version 2 TM mechboxes (with internals) were strongly suggested to be installed in CA guns to make them more reliable with a metal body. Supposedly a bit of filing and grinding were needed to fit properly. For a Version 3, I can't see much differnece, so I'll just give you aheads up that it most likely is possible, I'll just let the experienced tell you. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

June 21st, 2006, 22:05	#4
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	I've put a few Marui mechboxes in C.A. Armalite metal bodies with ZERO mods. They slipped right in and worked like a dream. These same mechboxes would not go into a G&G metal body though. I'm not sure about Ver. III though. Sorry. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

June 21st, 2006, 21:48	#3
Russianboy Banned Trader rating Join Date: Mar 2006 Location: Athens, GA	The shell on the CA gearbox's are thicker then TMs. You may run into an issue with that V3. Or not, you never know.

June 24th, 2006, 03:13	#5
nic_s Trader rating Join Date: Oct 2004 Location: BC	Bump, for great justice. __________________ ...and she's terribly partial to the periwinkle blue.

Marui mechbox in CA Gun?

Doctor's Corner