my D-90-H =jammed

Greylocks · June 8th, 2006, 17:09

I'll sound like a dick then; you bought a piece of crap. It failed because it's a piece of crap. It's what? $36 US?

Right now your choices are; try to fix it by shoving that rod down the barrel, buy another one and take a chance again, or buy a far better gun than that and keep this one as a display piece.

Good brands to look for; Marui, ICS, CA. That's about it.

MadMax · June 8th, 2006, 17:29

If the Well is a clone to the TM P90, your best bet is to remove the front end before attempting to unclog the barrel. With the front group removed, the mechbox nozzle wouldn't block the bb passage.

If you don't have a clearing rod, you're going to have to make one. Try cutting a wire coat hangar and bend the wire stock straight. Wrap the tip in several layers of tape so it doesn't scratch the inside of the barrel and use the makeshift clearing rod to push the bbs out.

Stick to better grade pellets which are less likely to jam. Low grade pellets may mostly be round, but there are a few obround or very badly shaped pellets which may jam your barrel and have additional rounds packed in.

nic_s · June 9th, 2006, 02:26

Is it just me, or should this have been trashed long ago?

flack · June 9th, 2006, 11:05

Quote:

Originally Posted by nic_s

Is it just me, or should this have been trashed long ago?

no.... whats wrong?

HE HAD A QUESTION.

nic_s · June 9th, 2006, 13:56

...about a gun that costs as much as a TM lowcap and is not worth fixing.

fantastix · June 9th, 2006, 14:02

Hit it with a rock

taylorvw · August 11th, 2006, 02:34

were would you get a WELL D-90-H gun like that in canada?

ILLusion · August 11th, 2006, 03:01

check some dumpsters

surebet · August 11th, 2006, 03:06

no

Trader rating · August 11th, 2006, 08:52

Quote:

Originally Posted by ILLusion

check some dumpsters

HAHAHAHA
nice

Greylocks · August 11th, 2006, 10:16

Quote:

Originally Posted by taylorvw

were would you get a WELL D-90-H gun like that in canada?

You should know better than to even ask that by now. Really.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 8th, 2006, 17:29	#17
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	If the Well is a clone to the TM P90, your best bet is to remove the front end before attempting to unclog the barrel. With the front group removed, the mechbox nozzle wouldn't block the bb passage. If you don't have a clearing rod, you're going to have to make one. Try cutting a wire coat hangar and bend the wire stock straight. Wrap the tip in several layers of tape so it doesn't scratch the inside of the barrel and use the makeshift clearing rod to push the bbs out. Stick to better grade pellets which are less likely to jam. Low grade pellets may mostly be round, but there are a few obround or very badly shaped pellets which may jam your barrel and have additional rounds packed in. __________________ Want nearly free GBB gas?

June 9th, 2006, 02:26	#18
nic_s Trader rating Join Date: Oct 2004 Location: BC	Is it just me, or should this have been trashed long ago? __________________ ...and she's terribly partial to the periwinkle blue.

June 9th, 2006, 13:56	#20
nic_s Trader rating Join Date: Oct 2004 Location: BC	...about a gun that costs as much as a TM lowcap and is not worth fixing. __________________ ...and she's terribly partial to the periwinkle blue.

June 8th, 2006, 17:09	#16
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	I'll sound like a dick then; you bought a piece of crap. It failed because it's a piece of crap. It's what? $36 US? Right now your choices are; try to fix it by shoving that rod down the barrel, buy another one and take a chance again, or buy a far better gun than that and keep this one as a display piece. Good brands to look for; Marui, ICS, CA. That's about it.

June 9th, 2006, 14:02	#21
fantastix Trader rating Join Date: Mar 2004 Location: Windsor, Ont	Hit it with a rock __________________ Before the internet, the village idiot would stay in his own village.

August 11th, 2006, 02:34	#22
taylorvw Trader rating Join Date: Mar 2006 Location: pence	were would you get a WELL D-90-H gun like that in canada?

August 11th, 2006, 03:01	#23
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	check some dumpsters __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

August 11th, 2006, 03:06	#24
surebet Vicious MSPaint Wizard Trader rating Join Date: Aug 2004 Location: Longueuil, Quebec	no __________________ Annoyingly good with numbers Stop American Censorship

my D-90-H =jammed

Doctor's Corner