how to open up TM M4A1AEG

airsoftassasin125 · January 10th, 2006, 20:11

how do i seperate the upper reciever from the bottom reciever. i know you have to poke out that pin near the stock, but it doesnt want to come off and I dont want to force it.
plz help! :shock:

rat · January 10th, 2006, 20:22

take off pin near stock, and yes you will have to pull a bit...you wont break it...

this should help! <--click me-->

airsoftassasin125 · January 10th, 2006, 20:25

ok. I got it. Thanks bro

FieroGT · January 10th, 2006, 21:21

Make sure you push the tabs in with your thumb and finger when you push it back together, otherwise one tab might try and seat on the outside of the lower reciever, and snap.

airsoftassasin125 · January 10th, 2006, 21:22

one more question. how do I take the whole gear box assembly out?

airsoftassasin125 · January 10th, 2006, 21:23

never mind. i didnt see the link rat had posted. thnx again

Dozer_01 · January 10th, 2006, 21:28

I would be a little more worried about breaking the tabs on a metal body since they dont have any flex (duh). Mine is a BITCH to take on and off.

rat · January 10th, 2006, 23:07

what dozer is refering to are the "hole" structures that the initial pin that you removed goes through. these are very fragile and are notorious to crack. when you reassemble the upper receiver ensure that you first guide the tabs gently in before clamping it shut.

airsoftassasin125 · January 11th, 2006, 20:52

k. thnx for the advice, but i have another question.

how do you get the trigger assembly to stay in. when i put it in, it just pops back out. its a ver.2 gearbox.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 10th, 2006, 20:11	#1
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	how to open up TM M4A1AEG how do i seperate the upper reciever from the bottom reciever. i know you have to poke out that pin near the stock, but it doesnt want to come off and I dont want to force it. plz help! :shock: __________________ .:Peace Loving Music:. :kill:

January 10th, 2006, 20:25	#3
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	ok. I got it. Thanks bro __________________ .:Peace Loving Music:. :kill:

January 10th, 2006, 21:22	#5
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	one more question. how do I take the whole gear box assembly out? __________________ .:Peace Loving Music:. :kill:

January 10th, 2006, 20:22	#2
rat Trader rating Join Date: Feb 2005 Location: Montreal, PQ	take off pin near stock, and yes you will have to pull a bit...you wont break it... this should help! <--click me-->

January 10th, 2006, 21:21	#4
FieroGT Trader rating Join Date: Jan 2002 Location: Nanaimo, BC	Make sure you push the tabs in with your thumb and finger when you push it back together, otherwise one tab might try and seat on the outside of the lower reciever, and snap.

January 10th, 2006, 21:23	#6
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	never mind. i didnt see the link rat had posted. thnx again __________________ .:Peace Loving Music:. :kill:

January 10th, 2006, 21:28	#7
Dozer_01 Trader rating Join Date: Sep 2003 Location: Ontario	I would be a little more worried about breaking the tabs on a metal body since they dont have any flex (duh). Mine is a BITCH to take on and off. __________________ LLTP

January 10th, 2006, 23:07	#8
rat Trader rating Join Date: Feb 2005 Location: Montreal, PQ	what dozer is refering to are the "hole" structures that the initial pin that you removed goes through. these are very fragile and are notorious to crack. when you reassemble the upper receiver ensure that you first guide the tabs gently in before clamping it shut.

January 11th, 2006, 20:52	#9
airsoftassasin125 Trader rating Join Date: Aug 2005 Location: San Ramon, CA	k. thnx for the advice, but i have another question. how do you get the trigger assembly to stay in. when i put it in, it just pops back out. its a ver.2 gearbox. __________________ .:Peace Loving Music:. :kill:

how to open up TM M4A1AEG

Doctor's Corner