ICS AK Release

DEA · December 11th, 2005, 13:14

Hello Everyone,

As you know, the release of the new ICS AK's are getting close! Being the Canadian Distributor for ICS, I am trying to secure as many as I need, which at this point does not look like it should be a problem.

I should have more details back this coming week, but I will most likely be doing a large pre-order on these when I know the release date detials. To get in on this, you can either contact myselft via e-mail (randy@doubleedgeairsoft.com) or Tru here on ASC. Either one of us will be able to hook you up.

Again, please watch for futher posts here. As soon as I find out the release date details, and get the final price from them I will post it up. They should be one sweet item. They will of cousre keep the ICS tradition of the metal bodies and 500 rd hi-cap mags. I know first hand they have been testing these over and over again to be sure when they release, there are no problems.

You can contact me if you have any futher questions, and I will get the details to Tru once I get them too.

Tankdude · December 11th, 2005, 13:21

Estimated cost?

550-700?

DEA · December 11th, 2005, 14:51

Estimated..... I would say $450.00 maybe.. Closer to $500 after all taxes/shipping.

I can't see it being up around the $700 mark, especially if I can get a large pre-order going.

ancorp · December 11th, 2005, 17:21

The prices sounds great to me, although Im sure alot of people would like to see a review and some better pictures first!

Cheers,
Alex

Warthog · December 11th, 2005, 17:26

Yeah, could anybody post some picture, I'm dying to see what it looks like.

Tankdude · December 11th, 2005, 17:51

Link to ICS site

DEA · December 11th, 2005, 18:00

Thanks Tankdude

Yes, on the ICS page should be all the info you need

ICS is trying very hard to work closer to all of us, so if there are questions you have specific, I could have them answer them directly for you if you like! Just let me know.

ancorp · December 11th, 2005, 18:04

DEA,
Can the cocking handle be cocked back all the way, like the real thing, or is it only about halfway, like the TM ones?

Cheers,
Alex

attack-beaver · December 11th, 2005, 20:06

now i hear that the G&G AK-104 stock does not fold but does this AK stock fold. plus this a AK-101 right.

Kid · December 11th, 2005, 20:09

I seriously doubt this folds... if you find a hinge... (is that the right spelling?) then I am proved wrong.

DanQuayle · December 11th, 2005, 20:47

Can you remove/use the cleaning rod, or did they pull a marui?

Warthog · December 11th, 2005, 21:32

I'd really love to see a wooden, foldable stock version of the AKS-74.

ancorp · December 12th, 2005, 00:00

Definately not a 101, the 101 uses 5.56 Nato, with even less curved magazines. That one is a AK-74M.

Cheers,
Alex

DEA · December 12th, 2005, 01:21

Hey everyone, I will have the answers to all the above questions from ICS directly, so just give me a day till all the e-mails come back. Anyways, here is a direct reply from ICS this evening in regards to the release:

"Hi Randy:
AK has finish final stage .
We have assembled some test gun for playing in war-game .
Now , we are waiting to see how it work during the game .

So , we suppose to run on producing line around end of Jan 2006 .
Actually , its done .
We just want to make sure is this model without any problem .
We dont want to hurry for release .
We hope this gun is a perfect AK ."

So it should not be long!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 11th, 2005, 13:14	#1
DEA Trader rating Join Date: Jan 2003 Location: Calgary	ICS AK Release Hello Everyone, As you know, the release of the new ICS AK's are getting close! Being the Canadian Distributor for ICS, I am trying to secure as many as I need, which at this point does not look like it should be a problem. I should have more details back this coming week, but I will most likely be doing a large pre-order on these when I know the release date detials. To get in on this, you can either contact myselft via e-mail (randy@doubleedgeairsoft.com) or Tru here on ASC. Either one of us will be able to hook you up. Again, please watch for futher posts here. As soon as I find out the release date details, and get the final price from them I will post it up. They should be one sweet item. They will of cousre keep the ICS tradition of the metal bodies and 500 rd hi-cap mags. I know first hand they have been testing these over and over again to be sure when they release, there are no problems. You can contact me if you have any futher questions, and I will get the details to Tru once I get them too. __________________ "Fully Retired Retailer" :salute: Double Edge Airsoft!

December 11th, 2005, 14:51	#3
DEA Trader rating Join Date: Jan 2003 Location: Calgary	Estimated..... I would say $450.00 maybe.. Closer to $500 after all taxes/shipping. I can't see it being up around the $700 mark, especially if I can get a large pre-order going. __________________ "Fully Retired Retailer" :salute: Double Edge Airsoft!

December 11th, 2005, 17:26	#5
Warthog Trader rating Join Date: Mar 2004 Location: Montreal	Yeah, could anybody post some picture, I'm dying to see what it looks like. __________________ Never draw the sword without due reason And you'll never have to lay it down without honor

December 11th, 2005, 13:21	#2
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	Estimated cost? 550-700?

December 11th, 2005, 17:21	#4
ancorp AK Guru Trader rating Join Date: Mar 2005 Location: Vaughan, Ontario (near Toronto)	The prices sounds great to me, although Im sure alot of people would like to see a review and some better pictures first! Cheers, Alex

December 11th, 2005, 17:51	#6
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	Link to ICS site

December 11th, 2005, 18:00	#7
DEA Trader rating Join Date: Jan 2003 Location: Calgary	Thanks Tankdude Yes, on the ICS page should be all the info you need ICS is trying very hard to work closer to all of us, so if there are questions you have specific, I could have them answer them directly for you if you like! Just let me know. __________________ "Fully Retired Retailer" :salute: Double Edge Airsoft!

December 11th, 2005, 18:04	#8
ancorp AK Guru Trader rating Join Date: Mar 2005 Location: Vaughan, Ontario (near Toronto)	DEA, Can the cocking handle be cocked back all the way, like the real thing, or is it only about halfway, like the TM ones? Cheers, Alex

December 11th, 2005, 20:06	#9
attack-beaver Trader rating Join Date: May 2005 Location: calgary	now i hear that the G&G AK-104 stock does not fold but does this AK stock fold. plus this a AK-101 right.

December 11th, 2005, 20:09	#10
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	I seriously doubt this folds... if you find a hinge... (is that the right spelling?) then I am proved wrong.

December 11th, 2005, 20:47	#11
DanQuayle Trader rating Join Date: Jun 2005 Location: State College	Can you remove/use the cleaning rod, or did they pull a marui? __________________ Whoa. (\_/) (O.o) (> <)This is Bunny. Copy Bunny into your signature to help him on his way to world domination.

December 11th, 2005, 21:32	#12
Warthog Trader rating Join Date: Mar 2004 Location: Montreal	I'd really love to see a wooden, foldable stock version of the AKS-74. __________________ Never draw the sword without due reason And you'll never have to lay it down without honor

December 12th, 2005, 00:00	#13
ancorp AK Guru Trader rating Join Date: Mar 2005 Location: Vaughan, Ontario (near Toronto)	Definately not a 101, the 101 uses 5.56 Nato, with even less curved magazines. That one is a AK-74M. Cheers, Alex

December 12th, 2005, 01:21	#14
DEA Trader rating Join Date: Jan 2003 Location: Calgary	Hey everyone, I will have the answers to all the above questions from ICS directly, so just give me a day till all the e-mails come back. Anyways, here is a direct reply from ICS this evening in regards to the release: "Hi Randy: AK has finish final stage . We have assembled some test gun for playing in war-game . Now , we are waiting to see how it work during the game . So , we suppose to run on producing line around end of Jan 2006 . Actually , its done . We just want to make sure is this model without any problem . We dont want to hurry for release . We hope this gun is a perfect AK ." So it should not be long! __________________ "Fully Retired Retailer" :salute: Double Edge Airsoft!

ICS AK Release

Airsoft Guns Discussion