Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

TM Desert Eagle On Green Gas?

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old December 6th, 2005, 08:47   #1
Sniper Steve
 
Join Date: Dec 2004
Location: Gagetown
Send a message via MSN to Sniper Steve
TM Desert Eagle On Green Gas?

I have read alot of threads about people who have said that thier TM GBB broke a slide because of propane. However I was looking at 007Airsoft and it said that the Desert Eagle and one or two other pistols were ok on Green Gas.

Here is the link


I would like a little clarifaction please.
Sniper Steve is offline   Reply With Quote
Old December 6th, 2005, 10:03   #2
BloodSport
Traveling Man
 
BloodSport's Avatar
 
Join Date: Aug 2001
Location: Moose Jaw, Saskatchewan
It the stock platic slides that have a tendency to break.

If you upgrade to a metal ones, you are good to go. Although you can usually run on the stock one for a little while.
__________________
Saskatchewan Age Verifier! Contact for more Info.
BloodSport is offline   Reply With Quote
Old December 6th, 2005, 13:02   #3
skaterjoe
 
skaterjoe's Avatar
 
Join Date: Sep 2004
Location: Ucluelet B.C.
Send a message via MSN to skaterjoe
so far my slide has not broken on my TM desert eagle, and i have used it for about 4-5 bottles of propane or more.
the only thing that has happend was a pice inside of the slide broke, but i dont know if that was because of the propane or not as i had lent the gun out a couple times before i noticed it was broken. the pice did not afect performance, but im not sure if i can get the spring for the safty to sit in the gun any more (i havnt tried yet)
so ya, i wouldnt worry about it to much on the DE, and the the Mk 23 and the hardballer dont have moving slides, so i dont think it would be a problem with them either.
__________________
Quote:
Westicle says:
shit happens, don;t put your fingers or toes where you wouldn;t put your *****
skaterjoe is offline   Reply With Quote
Old December 6th, 2005, 15:51   #4
Suspect187
 
Suspect187's Avatar
 
Join Date: Nov 2004
Location: Calgary, AB
The only thing I used in my deagle was propane. No problems.
__________________
Quote:
Originally Posted by Sadiztix
Give Her Duster And She'll Love You Long Time
(The Gun, Not My Girlfriend)
Suspect187 is offline   Reply With Quote
Old December 6th, 2005, 18:49   #5
Sniper Steve
 
Join Date: Dec 2004
Location: Gagetown
Send a message via MSN to Sniper Steve
Quote:
so ya, i wouldnt worry about it to much on the DE, and the the Mk 23 and the hardballer dont have moving slides, so i dont think it would be a problem with them either.
Are you saying that the DE has no moving slide?
Sniper Steve is offline   Reply With Quote
Old December 6th, 2005, 18:51   #6
Sniper Steve
 
Join Date: Dec 2004
Location: Gagetown
Send a message via MSN to Sniper Steve
lol nvm I looked and the Mk 23 and the hardballer have fixed slides becuase I was going to say I was pretty sure that the DE had a sliding slide but the DE has a moving slide.
Sniper Steve is offline   Reply With Quote
Old December 6th, 2005, 19:02   #7
Kid
 
Join Date: Feb 2005
Location: Moose Jaw, SK
Weren't some of the very first Desert Eagles from TM non-blowback?
Not sure where I saw this... likely wrong, but now I'm interested.
Kid is offline   Reply With Quote
Old December 6th, 2005, 19:07   #8
Tag
 
Join Date: Oct 2005
Location: Mississauga
WE Hi-Cap

Try reviewing the WE Hi-Cap 5.1 C02 Full metal. My opinion, it's the best quality made hand gun. The gun overall is built like a brick chit house, I just croned the gun at 335 fps with the C02 Hi-Cap mag. I was so happy I just purchased six more.

WE Hi-Cap 5.1 Full Metal
WE Hi-Cap 5.1 Mark II Full Metal
WE Hi-Cap 5.1 Mark III Full Metal

Yee Haa!

Tag.
Attached Images
File Type: jpg WE Hi-Capa.jpg (102.3 KB, 10 views)
File Type: jpg WE Hi-Cap.jpg (122.7 KB, 10 views)
Tag is offline   Reply With Quote
Old December 6th, 2005, 19:11   #9
skaterjoe
 
skaterjoe's Avatar
 
Join Date: Sep 2004
Location: Ucluelet B.C.
Send a message via MSN to skaterjoe
Quote:
Originally Posted by Sniper Steve
Quote:
so ya, i wouldnt worry about it to much on the DE, and the the Mk 23 and the hardballer dont have moving slides, so i dont think it would be a problem with them either.
Are you saying that the DE has no moving slide?
soory for the confusion. yes a DE has a moving slide. i was saying from my experiance it can handle propane pretty good. and seeing as the other guns dont have moving slides, there slides arn't going to break. :-D

Quote:
Originally Posted by Tag
Try reviewing the WE Hi-Cap 5.1 C02 Full metal. My opinion, it's the best quality made hand gun. The gun overall is built like a brick chit house, I just croned the gun at 335 fps with the C02 Hi-Cap mag. I was so happy I just purchased six more.

WE Hi-Cap 5.1 Full Metal
WE Hi-Cap 5.1 Mark II Full Metal
WE Hi-Cap 5.1 Mark III Full Metal

Yee Haa!

Tag.
Holy wack!!! some one has waaaaaaaaay to much money on their hands.
__________________
Quote:
Westicle says:
shit happens, don;t put your fingers or toes where you wouldn;t put your *****
skaterjoe is offline   Reply With Quote
Old December 6th, 2005, 19:24   #10
Sniper Steve
 
Join Date: Dec 2004
Location: Gagetown
Send a message via MSN to Sniper Steve
Quote:
Holy wack!!! some one has waaaaaaaaay to much money on their hands.
No Kidding. I have to save for this Desert Eagle and a Systema FTK and I just bought a Full Metal body and that doesn't even come close to the price of six of the Hi-Cap 5.1s.
Sniper Steve is offline   Reply With Quote
Old December 6th, 2005, 19:31   #11
skaterjoe
 
skaterjoe's Avatar
 
Join Date: Sep 2004
Location: Ucluelet B.C.
Send a message via MSN to skaterjoe
i know what you mean. i just bought $400 plus in gear and am now broke and will be broke for a wile longer.
hey, just wondering, what are you planning to use your DE for?
__________________
Quote:
Westicle says:
shit happens, don;t put your fingers or toes where you wouldn;t put your *****
skaterjoe is offline   Reply With Quote
Old December 6th, 2005, 21:57   #12
BloodSport
Traveling Man
 
BloodSport's Avatar
 
Join Date: Aug 2001
Location: Moose Jaw, Saskatchewan
heh heh those WE De's are not bad.

I've ordered a 10" full metal upgrade kit for my TM DE, will put the guns value around $700 and thats before any internal upgrades.
__________________
Saskatchewan Age Verifier! Contact for more Info.
BloodSport is offline   Reply With Quote
Old December 7th, 2005, 09:26   #13
Sniper Steve
 
Join Date: Dec 2004
Location: Gagetown
Send a message via MSN to Sniper Steve
For games and stuff. The same thing I use my M16 for.
Sniper Steve is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 04:57.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.