TM M14 charging handle BROKE!!!

Danger_Doom · November 22nd, 2005, 21:16

I dont know how to fix it. GRRRR

Did this happen to anyone yet?

On its first night out it broke. Everyone on the field had to take a turn to pull and listen to the charging handle. when I got home I saw this. has not been dropped or anything like that.

has anyone taken apart a M14 yet?

Blastyman · November 22nd, 2005, 21:50

Doesn't look broke to me. Looks like you got to put the fake bolt back in the proper guide.

That round brass part is supposed to go in a spot that the charging handle cycles.

Gryphon · November 22nd, 2005, 22:15

Yeah, that's not broken. Been a while since I had a real M14 but IIRC you need to cock the handle back slightly and it should raise out of a notch cut in the track. You should then be able to reinsert the bolt bearing. Of course this is an airsoft gun so I may be speaking from my rear.

Danger_Doom · November 23rd, 2005, 08:37

Quote:

Originally Posted by W.K.Shuridys

Yeah, that's not broken. Been a while since I had a real M14 but IIRC you need to cock the handle back slightly and it should raise out of a notch cut in the track. You should then be able to reinsert the bolt bearing. Of course this is an airsoft gun so I may be speaking from my rear.

the handle is stuck where it is, you cant move it in any direction. same as the bolt bearing.

Blastyman · November 23rd, 2005, 10:54

Well its probably just jammed up a bit. Anyhow just pop the gearbox out and put the parts back in the right spot if you have too.

But you should be able to wiggle it loose I think.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 22nd, 2005, 21:50	#2
Blastyman Trader rating Join Date: Feb 2003 Location: Edmonton ,AB	Doesn't look broke to me. Looks like you got to put the fake bolt back in the proper guide. That round brass part is supposed to go in a spot that the charging handle cycles.

November 22nd, 2005, 22:15	#3
Gryphon Trader rating Join Date: Mar 2005 Location: MB	Yeah, that's not broken. Been a while since I had a real M14 but IIRC you need to cock the handle back slightly and it should raise out of a notch cut in the track. You should then be able to reinsert the bolt bearing. Of course this is an airsoft gun so I may be speaking from my rear.

November 23rd, 2005, 10:54	#5
Blastyman Trader rating Join Date: Feb 2003 Location: Edmonton ,AB	Well its probably just jammed up a bit. Anyhow just pop the gearbox out and put the parts back in the right spot if you have too. But you should be able to wiggle it loose I think.

TM M14 charging handle BROKE!!!

Doctor's Corner