|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
November 2nd, 2005, 10:15 | #1 |
HFC Vsr-10/11
I hope this is not a re-post, but i was surfing around redwolf airsoft and on the new products list i saw a HFC VSR-11, and i was like wtf. i also wrote 10/11 because on other sites they refer it as a hfc vsr-10. iv seen some call it the UFC 11.
clickity click its surprising cuss it going for 100USD HFC VSR-11 Plastic stock and metal barrel. Firm cocking action with the metal cocking lever. Hop up adjustable lever is on the side of the receiver, easy to adjust with. Each shot is accompanied by a satisfying solid jolt and "clunk". Black stock design adds a more tactical and military look. Power and accuracy are good with such attractive price. 500rds 6mm BBs and BB loading tool included. looks like a direct copy of the TM VSR-10 the only difference so far is that it runs on gas. the colour looks a little glossy, but it might be the angle of the camera. I hope this isn't a repost, for some reason my mind is telling me it is.
__________________
Army Glock 17 KJW M700 - gone ICS Ak74 - gone WE hi-capa 5.1 striker - gone TM Ak47 - gone Western Arms Inifnity 3.9 - gone Get your answers here! Answers: $5 Good Answers: $10 Correct Answers: $20 Well-researched Answers complete with reference: $150/hr plus materials |
|
November 2nd, 2005, 10:32 | #2 |
Administrator
|
look at the airsoft atlanta blog on all the new low end sniper rifles.
Im feeling nice so here http://airsoftatlanta.blogspot.com/ |
November 2nd, 2005, 14:07 | #3 |
Depending on the build quality, I'd buy it. Since I spent a helluvalot more on my VSR-10 in the first place, and wound up doing the exact same mod...
Drilling out the stop on the piston head isn't difficult at all, and after taking the weights off the piston, they claimed (in the review) that they could get some 350+ fps velocities... seems like it'd be a good base gun for use with marui compatible upgrades. |
|
November 2nd, 2005, 15:17 | #4 |
WW2 Airsofter
|
My guess is retailers will still jack up the price to about $300 once there over here in Canada.
Look at the luger sniper carbine its listed for $81.00 ($95 Canadian) on WGC but 007 has it listed for $375 canadian (im just using 007 as an example, im sure all the other retailers sell them at that price too) which is a complete rip off, becasue look at the M-14 its listed on wgc for $318.00 (392.18 canadian) and 007 has them listed for $680. http://www.007airsoft.com/products/htm/gas-kjw.htm So for the M14 the price is determined but taking the origional price and multiplying it by 2.1 But for the Sniper Carbine, since it's cheaper, the origional price is multiplyed by 4.1 I really dont get how they come up with these numbers, becasue really, the carbine should only cost 199 canadian....But it doesnt, becasue people will still come up with the money one way or another. Erik
__________________
I can't measure my sig so I got this stupid tag line instead. |
November 2nd, 2005, 15:23 | #5 |
Administrator
|
grimfandago sold the carbine for 150 i think
|
November 2nd, 2005, 15:29 | #6 |
If it runs on gas, wouldn't it be TOTALLY different from the mauri ones?
__________________
Солдаты Свободы |
|
November 2nd, 2005, 16:20 | #7 |
same, as in the design
__________________
Army Glock 17 KJW M700 - gone ICS Ak74 - gone WE hi-capa 5.1 striker - gone TM Ak47 - gone Western Arms Inifnity 3.9 - gone Get your answers here! Answers: $5 Good Answers: $10 Correct Answers: $20 Well-researched Answers complete with reference: $150/hr plus materials |
|
November 2nd, 2005, 16:47 | #8 |
doesn't run on gas, they made an error on Redwolf. It's the exact same design as the Marui. (supposedly)
|
|
November 2nd, 2005, 19:43 | #9 |
Administrator
|
Read the review from airsoft atlanta that i posted. It answers that its exactly the same and can use the smae parts.
|
November 2nd, 2005, 22:15 | #10 |
Erik-James... before you accuse the retailers of jacking the prices for no reason, why dont you read about Import Duties, Licenses, and all the red tape they have to pay? Not to mention the exhange rate and shipping charges?
|
|
November 2nd, 2005, 23:26 | #11 | |
Guest
|
Quote:
|
|
November 2nd, 2005, 23:42 | #12 | |
WW2 Airsofter
|
Quote:
__________________
I can't measure my sig so I got this stupid tag line instead. |
|
|
Bookmarks |
|
|